Questions & Answers

Q: QuestionWhat is the frequency response for these speakers?

• A:Answer These speakers have a frequency response of 44Hz - 20kHz.

Q: QuestionWhat is the impedance of these speakers?

• A:Answer These speakers have an 8 ohms nominal impedance.

Q: QuestionWhat size is the woofer on these speakers?

• A:Answer These speakers have a 6-1/2 inch woofer.

Q: QuestionDoes this speaker system have a tweeter?

• A:Answer Yes, this is a 2-way speaker system with a 1" polyurethane tweeter.

Q: QuestionHow are these speakers mounted?

• A:Answer These speakers are designed to be mounted in the ceiling.

Q: QuestionCan these speaker be used in patio ceiling(outside, but no exposed to rain, etc)?

Asked 5 years ago by Jim.

• A:Answer As long as there is a ceiling structure and they are not directly exposed to the elements these speakers should work for that application.

  Answered 5 years ago by Sonos Customer Care

  
  Helpful (5)Unhelpful (0)ReportAnswer this question

Q: QuestionI know this is purchased as a pair but do i have to use them that way? I would like to use one in a master bath and the other in a regular bathroom

Asked 5 years ago by Dponce.

• A:Answer Hi, thanks for you question. These speakers are designed to be used as a pair connected to a Sonos Amp. If you wired both to a single Sonos Amp, and switched to a Dual Mono output, you would play music in both bathrooms, at the same time and would not have independent control.

  Answered 5 years ago by Sonos Customer Care

  
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionDo you need a Sonos amp to connect these to the sonos system?

Asked 6 years ago by MC.

• A:Answer You can use any Amp, but the Sonos Amp's equalization is designed specifically to match these speakers.

  Answered 6 years ago by Sonos Customer Care

  
  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionFor a small (10 x 12) covered outdoor living area with a big screen TV, will these speakers and the SONOS Amp allow me to supplement the TV volume/sound and stream music from Spotify/Pandora, etc., through the Amp? Do I need a Soundbar, too?

Asked 3 years ago by Joe.

• A:Answer Hi Joe, if you are able to plug the amp directly to the tv ARC port you don’t need the sound bar. In my set up the amp is located in a tech closet that’s not close to the tv so I needed to add the Sonos bean sound bar. Note that once your device is connected to Sonos it can play on all your Sonos speakers that are connected to amps.

  Answered 3 years ago by OaklandERVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill these speakers fit into a hole that requires 8" mounting?

Asked 6 years ago by Atoolio.

• A:Answer The cut out dimension for these speakers is 8 1/4" in diameter.

  Answered 5 years ago by Sonos Customer Care

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionIf I purchase these speakers and amplifier, will I still need to purchase an arc and sub for the TV if everything is in the same room?

Asked 3 years ago by Wendell.

• A:Answer No

  Answered 3 years ago by Cenlxo1072Verified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the Architectural speakers work with the Sono's ARC Soundbar with Dolby A?

Asked 4 years ago by EDMBEST.

• A:Answer Not for Dolby Atmos but you can use them as surround sounds. Arc will product the front, and height sounds, and the in ceilings (or in walls) would be the the surround sounds.

  Answered 4 years ago by Sonos Customer Care

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionCan these be mounted vertically in a wall, as well, or just ceiling?

Asked 5 years ago by angelfan.

• A:Answer Hello, and thank you for this question. You can mount these in the wall if you would like.

  Answered 5 years ago by Sonos Customer Care

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat gauge speaker wire should be used to connect these speakers to the Sonos Amp? Is there a preferred brand of speaker wire, or does that not matter?

Asked 5 years ago by JoeSC.

• A:Answer Hi, and thanks for your question. Here's our recommendation for speaker wire gauge: Runs less than 80ft (less than 24m) = 16 gauge Runs 80 to 200 ft (24m to 61m) = 14 gauge Runs 200 to 300 ft (61m to 92m)* = 12 gauge *runs over 300ft not recommended We hope this helps!

  Answered 5 years ago by Sonos Customer Care

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDo I need an amplifier for this to work?

Asked 1 month ago by Sam.

• A:Answer Yes you do as these are passive (require power source)

  Answered 1 month ago by Anonymous

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionSo, I cut holes in the ceiling, hard wire these to 110v power lines. From there i can just have them pair to my phone or apple homePod for steaming music. Or am i missing something? Nothing Cleary spells out set up.

Asked 11 months ago by Soundguy.

Q: Question1. Am I correct in understanding this product is wired with traditional speaker wire. Does it need additional power cords / Electrical cords? 2. My system is Hisense C1 projector with Doby Atoms, will these speakers degrade or support that quality?

Asked 1 year ago by BigTvsRule.

Q: QuestionAre these the same or different from the 6 inch in-ceiling speaker set on the Sonos website?

Asked 1 year ago by Anonymous.

• A:Answer Yes these are the same speakers from our website.

  Answered 1 year ago by Sonos Customer Care

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionhow much square footage will one 6-1/2 speakers cover adequately ?

Asked 2 years ago by tobasco.

• A:Answer Unfortunately, it's not about square footage coverage with in-ceiling speakers like the Sonos Architectural 6-1/2. Here's why: Sound Dispersion: In-ceiling speakers radiate sound in a cone-like pattern. This means sound isn't focused in a specific direction and fills the room differently than a traditional speaker. Room Acoustics: The size, shape, and materials in your room significantly impact how sound travels and is perceived. Desired Volume: If you want loud, room-filling sound, you'll need more speakers than if you simply desire background music. How to determine how many speakers you need: Room Size: Start with the dimensions of your room. A larger room generally requires more speakers for even coverage. Listening Position: Where will you primarily be listening from? Focus on placing speakers closer to this area. Speaker Spacing: For general audio, aim to space in-ceiling speakers roughly 6-8 feet apart. For more focused, directional sound, you can place them closer together. Recommendations: Consult a Sonos Dealer: Dealers specializing in Sonos systems can offer a personalized assessment of your space and recommend an ideal speaker layout. Online Tools: Some resources, like the basic guides on the Sonos website, can give you a rough starting point. Important Note: Sonos Architectural speakers are passive speakers, meaning they need a Sonos Amp to power them. Let me know if you have a specific room size or layout in mind; I might be able to provide some general guidance!

  Answered 2 years ago by Sonos Customer Care

  
  Helpful (0)Unhelpful (0)ReportAnswer this question