“I have a tv wall mount but no screws. What size screws does the 43 inch model use? Also will I need washers with the screws?”
Answer This Question
1-3 of 3 Answers
I just mounted this. It took an M5 screw from lowes.
Sorry, there was a problem. Please try again later.I have this tv. The tv came with standoffs that are threaded on both sides. I realized this later and found them with the user guide. If you don't have those, the size that appeared to fit in the recessed holes is M5, you'll probably need M5x50 to thread in far enough through the recess over a thin bracket. If you have the standoffs, the thread is M6. I used as M6x14mm that came with the bracket. Since the standoff brings the thread up to the bracket much shorter screw needed.
Sorry, there was a problem. Please try again later.Hi Mike, Thank you for the inquiry. The Vesa Hole Pitch of the KD43X85J is 7.87 x 7.87 inches (200 x 200 mm). The length of the screw for the Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. The Screw is M6(10 mm – 12 mm). I hope this helps! Jay
Sorry, there was a problem. Please try again later.