“I just bought the SP-650 but I need a 20 pin and this is 22 pin I ordered a SP-650P online. It said universal, but when I got it out of the box it had a 22 pin (21 actually) and I need a 20 pin for an AMD motherboard. It had a Thermaltake Purepower P/N W0070RU already but I wanted to upgrade for a dual monitor graphics card so I got the 650. WHAT ONE SHOULD I GET SO I DON'T HAVE RUN BACK AND FORTH ALL DAY?”
Answer This Question
1-4 of 4 Answers
20 or 24 pin . They do not manufacture 22 (21)pin connection. Is this pc very very old? Unfortunately this psu is 24pin only. You need to check and see the specs of the psu to see if it has a 20/24 pin... that is what you would need.
Sorry, there was a problem. Please try again later.The power supply has a 24 pin main power, and it has a separation to a 20 pin main power (you separate 4 pins from it).
Sorry, there was a problem. Please try again later.No such connector as a 22 pin. Only 20, 20+4, and 24. I forget which this is (20+4 or 24). Most mobos that have come out in the last half-decade require 24 pin. There is a CPU pin that is 4+4. They both fit in the plug. Took me a min to get that plug right. Then booted fine, and runs nice a quiet.
Sorry, there was a problem. Please try again later.Dear Customer, SP-650P is 24 pin power supply. Missing wire/pin is -5V DC output. It was originally required because it was supplied on the ISA bus, but it became obsolete with the removal of the ISA bus in modern PCs and has been removed in later versions of the ATX standard. Best Regards, Thermaltake USA Customer service email: [email protected] Toll free: 1-800-988-1088 M-F 9:00AM ~ 5:30PM (P.S.T.)
Sorry, there was a problem. Please try again later.