“I want to clone the drive in my laptop with an SSD. Will I be able to clone using a USB to SATA cable on the TARGET drive??”
Answer This Question
1-5 of 5 Answers
That's how I did it.
Sorry, there was a problem. Please try again later.you don't needed a enclosure hassle.. you need only is put your ssd to sata then use AOMEI Disk Clone to clone o.s + data it's very easy to use nothing hassle.. that app for pc is only one nothing hassle to cloning..
Sorry, there was a problem. Please try again later.you don't needed a enclosure hassle.. you need only is put your ssd to sata then use AOMEI Disk Clone to clone o.s + data it's very easy to use nothing hassle..
Sorry, there was a problem. Please try again later.I'm confident if you used Acronis' True Image to perform the backup, it would meet your needs. You can call Acronis to further confirm.
Sorry, there was a problem. Please try again later.Jim, If reading correctly you want to clone your drive to an WD blue 1TB SSD? If you have a usb to sata connector that should work. I use a 2.5 inch case I picked up. If you have not ever replaced a hard drive I would suggest using minitool partition wizard (its a free download) and choose copy disk. as part of that selection it will ask you if you want to adjust partitions to size of new drive - especially if moving to a larger drive. Your machine will reboot and then do the copy - once done it will boot up using the original drive. Just open up the case - put in the new drive and it should boot up with no issues. If problems - check your boot sequence. good luck
Sorry, there was a problem. Please try again later.