A:AnswerModel GXW6536DXS can only be wall mounted. If you need a similar model that can be installed in an island situation then look into model GXI6536DX.
A:AnswerDear Valued Consumer:
Recirculation Kit Part Number W10294733 for non-vented (recirculating) installations for model GXW6530DX or GXW6536DX only. You may purchase this through your dealer or call our parts department to order at 1-800-442-9991.
Thank you for your interest in our Whirlpool vent hood.
A:AnswerFor vented installation, you can adjust the chimneys for ceilings between 7ft 4 inches and 9 ft 5 inches with vented slots not showing. For vent slots showing, the ceiling can be between 7 ft 4 inches and 9 ft 9 inches.
A:AnswerHello. You can see the dimension guide for this range hood on our website at http://bit.ly/1THeM9S . We hope this information is beneficial to you. Thank you for your inquiry regarding our Whirlpool appliances!
A:AnswerDear Valued Customer:
Thank you for your inquiry regarding Whirlpool vent model GXW6536DSX.
The sones for this model is 7.20.
Thank you again for your inquiry. We appreciate and value your business!
A:AnswerThe product dimensions of our 36 inch range hood model GXW6536DXS are listed below:
36 wide
20 deep
Height can extend from 27 1/8 minimum to 45 ½ maximum if non-vented and 27 1/8 to 41 1/8 for vented.
For vented installations, the chimneys can be adjusted for ceilings between 7ft 4 inches and 9 ft 5 inches with vent slots not showing and between 7 ft 4 inches and 9 ft 9 inches with the vent slots showing.
