Customer Ratings & Reviews

This mount goes perfectly with Samsung's new QLED 55" and 65" TVs. My TV sits completely flush against the wall. You can't see the mount at all. It does make the TV look like wall art. Only negative is that the mount doesn't allow you to move TV a little left or right to center where you want as much as some other mounts. So hopefully a stud is conveniently located for you. Also, you have to plan ahead for where your cables come out if you want to be able to sit the TV perfectly flush against the wall. Worth the extra work!

I looked at a few TV mounts for my new Samsung 4K TV that were much cheaper, but I liked the idea of this one being flush mount. It was well worth the extra cost and looks great in my opinion. I suggest that you watch the video provided from Samsung on the hanging instructions, but it was an easy install.

It is my understanding that this mount works for several Samsung TVs. We used it to mount a 55" Q7. We had not wall-mounted a TV before. What I didn't expect was how much it appeared to open up the room by moving the TV 8-10" back from the top of the stand to the wall. Properly installed, it appears to be very secure, at least for a set of this size. I might hold my breath hoisting a 65" up there, but Samsung says it'll work, so... If you are not mechanically inclined, or at least familiar with the general construction of your wall, go ahead and pay for installation. With the weight of the TV, this mount MUST be firmly attached to studs. There are slots for other screws, but you have to have the load capacity of large screws directly into wood. The other mounts are for stability. You will need: A stud finder, level, drill, screwdriver. I also used a laser level to find where I wanted the center line of the TV to be, and then to mark the position of the top line of the bracket. The instructions are...not good. Mostly they are pictures, and if you don't know what you're looking at, you may have to spend some time decoding what the pictures are telling you. What they depict is the various relationships between the mount, the screw slots and the studs behind the wall, telling you where you have to put screws. Once you have that sorted, you should be good. You'll need to know where you want the top of the TV to be. The instructions then tell you how far down from that line you'll want to place the mount for your particular TV. There are stabilizing screws that mount into the TV to allow you to adjust the angle of the TV (top-to-bottom) and have that angle stay put. The instructions for those are pretty much non-existent, but there are walk-throughs online that will help you get a picture of what you're doing. You won't need those if you mount the TV "no gap." One of the under-trumpeted features is that you can tilt the TV on the mount to get it level; that's a real bonus, as it makes your precision mounting the bracket to the wall a little less critical. This mount isn't cheap, but given the security and flexibility of how it works, it is 100% the best way to wall-mount these TVs. Good luck!

It is what it is, yep a wall mount. But this wall mount is specially made for the new Samsung QLED TV’s. Works great, easy to install and it allows for a near flush mounting of your tv and will also allow you to level the TV again if ever needed without taking the TV down. Well engineered. A must for any new QLED owner.

Purchased this to hang my Samsung Q9. Very easy setup. Hardest part was lifting the tv to hook it on the mount, because the tv is heavy. Very easy manual tilt leveling and tilting. Super clean look!

The best looks like a picture frame on the wall easy install sleek look

Perfect mount for the QLED Samsumg TVs. Easy to install and makes the TV flush with wall.

This tv mount is great! Having the tv sit flush with the wall surface is really nice!

The TV mount works as expected. It was easy to install and put the TV on the wall

With my new TV we decided to have it mounted to the wall. The geek squad Came and installed the TV this morning using the Samsung no Gap Mount it works perfectly the TV sits almost completely flush to the wall that the TV can tilt forward if needed minimal amount of drilling required but perfect amount for this TV.

It was very easy to install and the Qled looks Great flush with the wall. Recommend if you like the tv to micmic a picture frame and want it tight to the wall as possible. This is as close as ypu going to get to a flawless look.

This is a great low profile mount that is pretty easy to install and hang the Tv (sort of hangs like a painting/picture). Comes with a ton of hardware and additional parts to make just about any mounting situation successful. I hung this in brick above a fire place and it’s worked well!

I would recommend this tv mount to everyone. Yes there are several cheaper tv mounts out there but my main reasoning for purchasing this mount was due to the range of motion. Not your typical motion and you able to tilt in so many ways. Please ask someone to show you this mount in store. Afterwards you will agree it worth the extra money.

Worked well, it took a very short time to install and use

This wall mount is beautiful as it is invisible the TV looks like a fine painting

This item is easy to install and we like that the T.V. is very close to the wall!

This mount was basic to install and easy to hang the TV. You do not have to be a perfectionist when mounting because the mount has tilt left and right as well as forward and back. 15 minute process, taking your time, from start of project to watching TV.

the wall mount was easy to install and fits flat against wall. love it.

Quick and easy to mount. TV hugs the wall. Unit is easy to mount tv to.

This TV wall mount is easy to put up. It is very nicely hidden away behind the TV.