Customer Ratings & Reviews

I couldn’t be anymore ecstatic to own this special edition. From unboxing to setting up took about an hour. I set up this TT with Hana ML cart. Right off the bat, I was treated with neutral and accurate sound reproduction. Just what you would expect, listening to your favorite records without any coloration or emphasis on particular frequency ranges. The durability and reliability of Technics turntables are legendary and this TT is no exception. I can’t stop spinning my records, I recommend this TT to any novice or an experienced vinyl fan!

The Technics SL-1200 turntable has been an iconic design and staple of DJs and audiophiles for decades. Having owned several incarnations of the 1200, this is the second MK7 that has graced my presence. But Technics has gone all out with this version of the 1200 MK7, working in partnership with Lamborghini to create a special edition that comes with a Automobili Lamborghini slip mat, a picture disc LP that looks like Lamborghini wheels and plays the sounds of different Lamborghinis driving around tracks (both inside and outside the cab), and a special Lamborghini design graphic on the base of the turntable. I will say up front that the Lamborghini edition of the MK7 sounded no different sound quality-wise than the other 1200 MK7 that I have owned for the last year or so. But, it does look way cooler. Unpackaging/assembly: As always, the 1200 MK7 comes nicely boxed up in a double box, everything packaged in such a way it is easy to extract but well-protected. Having assembled half a dozen or so SL-1200s in my lifetime, this one was no different. And as always, the SL-1200 is a fine piece of electronics. Included in the box was the aforementioned slip mat and picture disc, a dust cover, the platter, base, and a Technics headshell (no cartridge included). There’s also an RCA cable, a power cord, and an instruction manual. There is an adapter for 45s too, as well as a holder for an additional headshell and cartridge (should you choose to have a second one handy). The turntable weighs a little over 21 pounds. It feels solid, is well-built, and looks super cool with the orange Lamborghini graphics printed on the base. I didn’t bother using the slip mat that came with the MK7, instead I grabbed a rubber mat I had from a different table. Throughout my initial listening period I tried a deer hide mat, and then ultimately an acrylic platter mat. The acrylic mat ended up bringing out the best sound from the MK7 in my opinion, and that is what I left on. Fortunately the acrylic mat was orange, so it looked super cool sitting on the platter. Next up was mounting a cartridge. I have to admit, for the cost of this table, I would have loved to seen a cart included. I know that Technics and many others might say purchasers of this table would be more inclined to purchase and mount their own carts (and they are probably right), but it would have been nice to see an AT cart in the box, as they are easily upgradeable through different styli to higher quality units. Or, throw in a DJ cart so one can get the table up and going quickly with no alignment needed and enjoy immediate sound. Since there was no cart, I tested a plethora of different carts that I have lying around that were already mounted in headshells. I tried high-output moving coil carts, low output moving coil carts, a moving iron cart, and several standard moving magnet carts. The sound signature of the Technics SL1200 MK7 became readily apparent: Solid, deep bass and mid-range, with a slightly rolled off treble. After trying half a dozen cartridges and headshells, I chose an AT moving coil cartridge (around the $300 mark) as my main cart for the MK7. A couple of positive notes: The MK7 is such a smooth turntable. The platter spins dead silent, it always had the perfect speed (using a strobe light and test disc), and I rarely found myself messing with or adjusting the pitch controls. It just worked. I know this is considered a DJ table, but I’m not a DJ, nor do I intend to scratch with this unit. As someone who considers himself an amateur audiophile, I had nothing to complain about with the sound. A few of negative notes: During my testing, I was disappointed in two things (other than no included cartridge). One, the lid/cover does not attach to the body of the turntable, nor is it possible to mount it there. And unlike previous iterations of the 1200, I don’t see any way to add hinges. Having to remove the lid every time and find a place to set it is a pain. It’s easier to bump the counterweight on the tonearm, or the cartridge. Two, the tone arm lift is disappointing. It just doesn’t feel right, feels cheap. Kind of disappointing on an otherwise stellar table. Listening tests: Using an AT MC cartridge in the 300-dollar range, mounted on the Technics headshell, I was immediately impressed by the amount of bass and warm midrange that was drawn out of the groove. I do have tables that provide a more detailed sound (particularly in the treble regions) and a wider soundstage, but they are belt-drive tables that require a lot more work to set up and cost a smidge more than the 1200 MK7 Lamborghini edition. Although, as I mentioned before, the extra you pay for the Lamborghini edition 1200 MK7 does NOT improve SQ of the table. It sounds exactly the same as the other MK7 I have that is not the Lamborghini edition. First up in my listening tests was Incubus’s A Crow Left of Murder. The first song, entitled Megalomaniac, demonstrated the MK7’s focus on the bass and mid-bass regions. Detail and soundstage were okay. With the same cartridge in use on other tables, I have heard better detail, but the sound from the MK7 was very pleasant and I felt like I could listen all day long without fatigue. Next up was Tool’s Lateralus, on picture disc. Wow, again, the focus on the lower registers made this an extremely fun listen. Justin Chancellor’s bass absolutely growled, with the MK7 easily pulling out the bass lines of this album and putting them on full display. Danny Carey’s double kick and tom work were fantastic to listen to, and I had listened to the entire album before I knew it. Fleetwood Mack’s Tusk is one of my favorite albums, as well as Rumors. Both these albums were given a spin on the MK7 during my initial listening period. I’ve listened to both albums hundreds of times on a lot of different turntables, so I am very familiar with them. Was the MK7 the best I heard these albums? No, but it was relatively close. On the title song, Tusk, when the bass comes into the mix, I started nodding my head, like, “Yep, that is the way it is supposed to sound.” Again, the 1200 MK7 is not the most detailed of turntables, but it does unleash a powerful sound that is at home with many different genres of music. Concluding thoughts: Over the last month I have spun over a hundred records on the MK7, and it is very pleasant to listen to. Not once has it given me an issue; it just works. As I mentioned before, I just have three complaints of the MK7 Lamborghini edition: The cue lever is cheap-feeling and disappointing, there is no included cartridge, and the dust cover cannot be mounted. That being said, I don’t feel that these detract enough to remove a full star from the rating. I’d give the SL-1200MK7 Lamborghini edition a solid 4.5 out of 5 stars and recommend it to anyone looking to buy an iconic turntable that will last you for a very long time.

I have not been able to use as much because I been working but it is such great turntable, you can never go wrong with technics great brand.

The Technics SL-1200M7B turntable is wonderful. The Mk7 upgrade of the venerable series has many upgrades and features. This Lamborghini Edition is the exact same model as the standard one with some stickers on it. I searched the manuals and online and all of the different version of the Mk7 have the same manual and stats. This is a great turntable in its price range, but you need to consider, do you love Lamborghini so much, you would pay an extra $500 for some stickers and an album of Lamborghini’s driving. I would expect some extra or better performance extras for $500, and there are none I could find over the regular Mk7 or other variants of it. With that out of the way the turntable is excellent. I pulled an Audio-Technica AT-VM95ML off my old turntable and put it on the SL-1200M7B. It’s a Moving Magnet cartridge. I also used some custom RCA cables with ground for connecting to my receiver. Setup is straight forward and like any turntable. Pull everything out of the box and assemble by dropping in the platter. Be careful of the slip sheet, I wrinkled mine a bit not realizing it was in the packaging. The turntable is made of aluminum, but the unit still has a good weight of 21.2. The legs are easy to turn to level the device. Under the platter are some dip switches to customize the player accessible through holes in the turntable. The slipmat must off to access them. You can change the LED coloring (Red or Blue) of the various lights, reverse the playback (make sure you have a cartridge designed to do this), set 78RPM, adjust Torque, and Adjust brake through 7 switches. You can move them with a small screwdriver. Outside of changing the LED color from Red to Blue, I left the settings at their default. Between unboxing, and setup it all took about 30 minutes. Measuring out the length the cartridge should be from the head and other specifics are all clearly laid out in the included manual. Once installed, putting on the weight and setting up the weight on the record are easy. This turntable is also for DJ and has features for adjusting how the records are played. For home use, it’s also superb. Once setup, I put it through its paces. The turntable spins up and down quickly once you start or stop it. Advantage of direct drive. You have access to 33 1/3 and 45 RPM settings, 78 is done through a dip switch), on/off, needle light, and arm control. The unit does not have an auto return for the arm. I had no background noise or humming. I cleaned and then played, classical, jazz, rock, R&B, pop, and techno on it. All sounded as true reproductions of the sound. Highs, mids, and lows all reproduced in detail, it reproduces sounds as it should be with a flat equalizer. You have to go higher in price to the next tier of turntable to get better. The arm tracked accurately, and I had no issues. If you want to control the pitch, there is a slider in the front right of the unit. If you accidently hit it, a reset button is right there to get you back to normal. The dust cover comes completely off and playing records with it on is fine. There is a slot for the 45RPM adapter, and a slot for an extra head unit. Although the cover may not fit with a head unit in the hole. This turntable is excellent. Sound, options, control. The included record has a picture of a Revuelto wheel and plays the sounds of six different Lamborghini’s from door chimes to starting, and driving off and back etc. The difference between this SL-SL1200M7B, and the base SL-1200MK7 is nothing performance wise. The manuals are the same except for the cover page showing a different picture. If a custom slipmat, stickers, graphics, and record of Lamborghini’s driving is worth $500 to you, then get it, it’ll be a talking piece. Both regular and Lamborghini versions look nice. But, for that amount of extra money, I’d expect some audio performance enhancements over the stock version, and I found nothing to say there are any. The turntable is great for home listening, I can’t speak to the DJ aspects of it.

I have loved music and records since I was a child in the 70s and a college DJ in the 1980s. I have transported my collection and a few years ago attempted to recreate my earlier record listening experiences at first with my 1980s Denon turntable and NAD amp and later with a AT turntable and a more modern amp. About a year ago, I acquired a techniques network audio amplifier, which in addition to being excellent for streaming and two channel video auto is also designed for phono. My older turntables had a limited, somewhat thin sound, even with this excellent amplifier. I had read about higher end turntables, but was uncertain that they would enhance my experience. I decided to try this SL/1200 variant with the addition of the cool and also somewhat nostalgic Lamborghini Green. As I had not purchased a high-end turntable in 40 years, I was uncertain how to choose the cartridge. After some reading, I settled on an Ortofon Blue moving magnet cartridge. The Technics included instructions were quite detailed and after conferring with the cartridge website, I was able to align the cartridge. The turntable is well built and solid and is designed for precise pitch control, and adjustability. If your cartridge supports two way rotation, this can be enabled in the firmware. As a DJ in the 80s preparing the next song required finding the proper groove and listening to the start in your headphones and then backing up to be ready for the crossover. I was not a performance DJ but a radio DJ so I merely use a feature like this to prepare the next song rather than Producing sounds. I have read that this turntable is quite popular with performance DJs. The sound with my techniques amplifier and Wharfdale speakers is excellent and I have even brought out some of my families records from the 30s 40s and 50s with fairly good results unless they were particularly warped. Despite excellent collections on streaming services, not everything is available. The turntable is attractive and is designed to look good in a living room or office. The instructions are clear. My advice is to get your photographs out of Storage and enjoy them!

My husband and I, after two years in our home, have finally starting upgrading our basement to be the gaming and entertainment space we’ve always envisioned. Part of this dream included a dedicated area for playing music, podcasts, etc. Because this space is meant to be fun and I love everything car related, we started with the Technics SL-1200MK7 Lamborghini turntable in Verde Shock and built our audio system around it. I went to our local Best Buy and met with a super knowledgeable employee in the audio section of the store. We spent a long time in the store’s studio listening to different bookshelf and tower speakers and talking about amps. We ultimately paired our turntable with the Sonos Amp and a pair of Bowers and Wilkins 700 Series bookshelf speakers. Something none of us realized at the time, but figured out quickly during setup, is that this turntable does require a preamp when paired with the Sonos Amp. Luckily these are inexpensive and can be found easily online. Our local Microcenter had one in stock. We found an Audio Technica moving magnet cartridge with a green stylus cover to match the esthetic of the turntable. This setup produces music that is best described as warm and rich. As we listen to our favorite songs on vinyl, we’ve caught details that will simply never come through compressed audio files on our phones or in our cars. One of our favorite bands is Nighwish. They’re a Finnish symphonic metal band that just released a new album titled Yesterwynde. With the aforementioned setup, bass is present, but not overbearing. Other instruments come through so clearly. Vocals are so crisp you think you’re in the recording studio listening to Floor Jansen live. This same experience extends to all other music that we’ve listened to so far. I do want to quickly mention that the Sonos Amp is a fantastic device as it not only allows you to play music from your turntable, but it also connects to music streaming services so you aren’t limited to only listening to vinyl. Of course, those files are compressed and not of the same quality, but it’s nice having the option and access to any music/songs/podcasts you want. The one thing that I wasn’t prepared for in this turntable venture was just how costly of a hobby it is. Amps, speakers, a cartridge and cable, even records themselves are extremely expensive. That being said, once you hear music through a quality turntable setup, I think you’ll also realize and agree that it’s worth every penny.

“That’s bonkers!,” -- my first thought seeing a picture of the legendary Technics SL-1200 DJ turntable with Lamborghini detailing. It’s a script flip. Normally its luxury car brands that borrow high-end audio marques. Here the famed Technics SL-1200 turntable incorporates Lamborghini’s iconic hex and “Y” design designating it as the SL-1200M7B. I needed time to process. Then I thought “I ‘need’ this!” The regular SL-1200M7 is already sharp, but the Lamborghini hex design turbo boosts the exhilaration, transforming it into a statement piece and conversation maker. It’s the special edition of SL-1200M7 special editions. It’s a work of art on a work of art. If that sounds hyperbolic it’s just a manifestation of my excitement about how well-done Technics (and Lamborghini) designed it. For sure, it’s not a “statement” audio purists will endorse. I can predict their declaration: “It’s a gimmick, void of any musical enhancements.” They would not be wrong, but my fun side still appreciates the SL-1200M7B’s unique, energized, but not over-the-top, appearance. On paper a Lambo-Technics mashup is far-fetched, and the SL-1200M7B could easily have ended up a hot mess. But seeing it in person, Technics and Lamborghini thoughtfully designed the SL-1200M7B to still be stylish years later. It’s a natural offshoot of a striking, adrenaline-charged Lambo and the mother of all party turntables, the SL-1200. LET’S TALK ABOUT THE ELEPHANT ON THE TRACK… Of course this extra-spirited version comes with a Lamborghini-like price tag. Functionally, the SL-1200M7B is identical to its more affordable SL-1200M7 sibling. In real terms the value-added to the SL-1200M7B is its Lambo inspired geometrical motif and color options plus included exclusive accessories. No technical cost-benefit analysis can rationalize its higher price over the SL-1200M. The price difference buys an excellent stylus with spare change. It’s the age-old question - “what price art?” Choosing the SL-1200M7B is 100% an emotional decision one must be content with before diving in. (And make sure you budget for a nice stylus too since none is included with any SL-1200 variation.) BULLISH FUN IN LAMBO STYLE With that elephant wandering away I’ll say that, just like an actual Lambo, pictures do not do the SL-1200MK7B justice. Having not eyeballed one in person before opening the box I was apprehensive about its true appearance. That angst turned to glee as I removed the turntables packaging and its stunning form was revealed. Like a beautiful fashion modeI, it captured my gaze. I could not be more thrilled with its impressive, engaging look. For sure, the SL-1200MK7B hit the right tone with what I think will become a time-tested design. Mine is yellow, but not cheesy. The Lambo-themed geometric pattern on the plinth looks as natural as swirls in marble. It screams “ready to rock and roll and hip hop down the street” without being obnoxious. I haven’t seen the other colors live but I’ll say yellow is best anyway. A beautiful 3D carbon fiber-ish plate with Lamborghini script is embedded into the bottom right corner of the plinth. From the press pictures I worried this was a sticker. (The plate could be real carbon fiber, but Technics doesn’t mention as a feature). That’s the extent of the special design. A little says a lot here. As I said earlier, it’s elegant and energetic without going overboard. A few “exclusive” extras are part of the package too. Most notable is the eye-catching Lamborghini wordmark and bull logo slipmat, though I wish it was just the bull. Everyone knows the Lambo bull and the Lamborghini name is already on the aforementioned plate on the plinth. Next up is a quirky LP of Lamborghini’s greatest accelerations. It’s a custom album of the roars and rumbles of its most famous engines. I have no real use for it but it’s cool and the sounds were expressly recorded for this turntable. The record itself looks like a Lambo wheel which is a visual treat when playing. I can see a DJ with a dual deck crossfading these magnificent engine “vrooms” into their routine. TECHNICS DURABILITY Build quality is identical to the SL-1200M7, that is to say 100% solid. I know some owners of previous SL-1200 generations groan about the Mark 7 having less metal and more MDF and plastic than its predecessors. It’s a legitimate gripe, but it’s also true of almost every product vs a decade plus ago. But when comparing 2024 turntables to 2024 turntables, the Mark 7 it tops among it peers in my book. There is a reason it’s an adored DJ turntable. It’s beefy, shock absorbing feet, even if they are plastic, are not going to be phased by booming sub-woofers or a room full of jumping partygoers. These are functional and not to be confused with the mostly decorative ones used by other brands. All the other major parts – plinth, tone arm, platter are time tested for both performance and longevity. I might crank up my music at times, nevertheless my home is a bit less frenetic than a night club so I’m confident the SL-1200M7B is going to be spinning for many years. There is one part of the SL-1200M7, and by extension the SL-1200M7B, Technics dropped the ball one – the dust cover. My beef is there is no hinge, it just sits on the plinth. There’s not even a dado joint to secure the cover. It just employs somewhat ineffective rubber feet to keep it from getting bumped around. The SL-1200M7 at its heart is a DJ turntable so this might be OK in that arena, but a lot of people use this turntable at home too for casual listening. I find it a head scratcher and a “miss” it doesn’t have removable hinges like Technics other models. Of course, this isn’t a reason to not buy but be aware the dust cover can’t be physically attached to the plinth. The functionality of the SL-1200M7B mirrors the feature-packed standard SL-1200M7 too. Much of it is DJ oriented that I don’t use. For example, beneath the platter is a set of dip switches to adjust braking and torque as well as activating 78RPM and switch the LED strobe light between red and blue. The good thing, though is, given the build quality, if I decide to learn how to DJ in ten years I have a quality turntable to give it whirl. The option to play 78 RPM records is handy for me now because I have a few of my dad’s 78s from his childhood. It’s amusing to give those a listen every now and then. The LED strobe is cool looking and useful when doing a speed check. Of course, this being a Lambro edition, I can’t get it out of my head that these are traditional colors of stop signals and police lights. I’m afraid I’ll get a ticket for playing a 33 at 45. On the plinth are buttons for 2x play speed and reversing as well as a pitch adjustment slide. All the buttons on the SL-1200M7B have acceptable feedback, far from budget feeling but not sublime either. The pitch adjustment slide though has a lovely glide to it. Again, I know zero about DJing, but I’d expect micro-accuracy here is paramount. The SL-1200M7(B)’s famed indefatigable direct drive motor, S-shaped tone arm, and LED stylus illuminator are reasons to own and love the SL-1200 even as a home user. The tone arm is 100% manual, a staple of DJ players and a mode many audiophiles with semi or automatic turntables prefer. Also of note, there is no built-in phono amp as some turntables have. To enjoy the SL-1200M7B it must be connected to an amp or receiver with MM stylus phono-in jacks. TIME TO GIVE IT A SPIN Turntables, while niche, range from a couple hundred to over $20K. For brevity I’ll over-simply it to entry, intermediate, & upper level. The SL-1200M7(B) is mid-market, with audiophile qualities but more affordable than the next tier up. As such, a stylus isn’t included under the assumption the user wants to choose one tailored to their musical ear or use case like DJing. Given this, the SL-1200M7B’s sound will partly depend on which stylus you install. As a side note, if you are new to turntables, setup here requires patience. There are lots of generic turntable set up “how to” videos online. As a DJ model I assumed it was particularly suited for dance, rock, and hip-hop music, and it is as far as durability and features go. But while I expected it would be biased toward vibrant and powerful rather than soft and smooth, I was wrong. Not wanted to go through calibrating a cartridge with the supplied headshell, I opted for the more plug-in-play Ortofon Concorde Music Blue. It’s the second most affordable model in the Concorde Music line. I sampled a variety of genres from high paced EDM to slow modern jazz and romantic era classical melodies. While I think it’s fair to say a DJ turntable like the SL-1200M7B is designed for high beat per minute music, to my ears it was unbiased and authentic sounding no matter what I played. I’m actually surprised it sounds as credible playing Chopin as it does Creedence or The Clash. Channel separation is realistic, and notes are detailed and accurate. Even “ancient” 40-year-old discs from when I was a kid with limited care, are listenable, but I don’t fancy myself as having an audiophile’s ear. THE RUN OUT GROOVE: FINAL WORDS In sum, if you put a value on aesthetics the SL-1200M7B is fairly priced. It puts a smile on my face even when I’m not using it. And that smile deepens when you hit “play.” There is no doubt the SL-1200M7 is an amazing versatile turntable. The only question is whether or not you are comfortable with the dear premium for the SL-1200M7B’s slick and distinguished paint job. It’s not dissimilar to upcharge paint options on actual Lambos and other car brands. For me, the yellow Y and hex pattern revs me up every time I put eyes on it, something I don’t think the SL-1200M7 could achieve so that is value to me. But if I did have to find an objective rationalization, the historical durability of the 1200 series gives me confidence I’ll be enjoying the SL-1200M7B for years to come.

I'm a long time vinyl collector and certified audiophile. This will be my fourth iteration of the SL 1200 series turntables. Two I still own, in separate rooms; the other two have been handed down to friends. The oldest of these is now over 40 years old and still performs solidly with no repairs other than phone cartridge changes. This is a solidly built table which over the years has earned the moniker "the DJ's table of choice;" and indeed, if you're at an event with a DJ, you're very likely to see them using an SL-1200. I always kind of resented this model being typecast in that fashion, since the SL series build quality and performance rivals that of many audiophile turntables, many of which are in a price range that doubles, trebles, or even more surpasses the cost of the 1200. If I were a novice in the vinyl market looking for a turntable, I might see the Technics identified as "for the DJ", and immediately move on to a product for home enthusiast use. For example, I've previously owned a VPI aries turntable, highly regarded and also far more expensive than the SL. While it was an eye catcher which earned me many compliments; it also required far more attention to operate. Initial setup was difficult trying to mount, balance, and align the cartridge, being a belt drive there was slippage & wear, not to mention that it requires an expensive power supply to properly regulate the speed. The Technics simplifies much of this using a plugin headshell making it far easier to install a new cartridge, or for that matter, swap cartridges on the fly - not possible on many high end turntables. The onboard stroboscope ensures at a glance that you're operating at the correct speed. I could write a book explaining the many features and options of the SL (and there is much out there documenting this in minute detail.) Suffice it to say that if you want solid performance and want to spend more time listening to your music instead of adjusting your turntable, the Technics has all you want in spades. As for the Lamborghini Edition, there is no difference in functionality between this and a standard SL-1200. It comes with a Lamborghini logo slipmat and a 33 vinyl record of "the sound of Lamborghini." Whether you want to spend more for the window dressing, that's up to you - it's not going to change the sound or performance of your turntable. There is one major difference to this model, being that the dust cover is completely detached on the Lamborghini; all previous models I've seen use a flip up. The odd thing is that there are still slots on the dust cover itself to accept the hinges as if it were a flip up. I was searching the box for the hinges, till I noticed there are no slots to accept the hinges on the turntable plinth itself, so you couldn't make it flip if you wanted to. Seems to me they could've supplied a dust cover without the slots in the back, but this is a minor issue to be sure. However, if you do want a dust cover that flips up, be sure to go for one of their other models. I'm very pleased with the performance of this new SL-1200, and given my prior experience, am sure it will be with me for a long time.

This is my third Technics turntable, and I am always impressed with their sound quality, ease of use, sturdiness, and beautiful design. Unboxing this baby was a breathtaking experience. I dug in to lift out the components and felt their heft—this is one massive piece of technology. Glimpsing the bright yellow Lamborghini design peeking out from below…and then catching sight of the etched Lamborghini nameplate--ah Bellissimo! I know some would say this is a gimmick, having a Lamborghini edition, but the beauty of this rugged plinth, and its elegant design taken as a whole—well, it is something you want to show off to your friends. It is an easy setup, putting on the platter, connecting the RCA cables and power cable, locking down the tonearm, and screwing on the counterweight--then deciding whether to use the slip mat with the slip sheet, or not. I decided to use the slip mat but not the slip sheet. I don’t currently have a DJ Cartridge, and I am not a Scratch DJ. Though it may be interesting to explore that artistry in the future. I have a good quality mat I can use as a replacement for the slip mat. And it may come to that. Later, while doing the listening tests, I used a Discwasher brush to clean a record and the record stopped spinning. I knew this turntable was said to be able to maintain high torque, so I was at first surprised--until I realized that the mat was slipping as it was intended to do. I do like the Lamborghini design on the mat, and because the mat is thicker than my replacement one would be, I would have to readjust the stylus tracking angle (the rake). It is not difficult to do, but with all the work I did switching out cartridges, I wasn’t keen on doing more work. I said the setup was easy, but there is one part of setup that I obsess over and take my time doing--and that is the alignment of the cartridge. Getting the overhang and azimuth set correctly is crucial to a “wow” listening experience. Now, if I had 5 compatible head shells, that would be a big help since I have 5 cartridges: 4 well maintained vintage Shure cartridges—the M91ED, M95ED, M97xE, and a V15 Type III, and one outlier, an Ortofon Red. The Ortofon is newer and hardly broken in. The head shell from my Technics SL-1500c came with the Ortofon Red cartridge premounted and aligned at the factory, though I printed out my own protractor from the internet and confirmed the accuracy of the alignment when I first set up the SL-1500c. The protractor was designed for the SL-1500c, but the 1200MK7’s tonearm has the same effective length, so I was able to reuse the protractor. It became a big undertaking switching out and aligning the cartridges, however, taking around an hour for each switch out. Technics used to supply a jig to help with this on some of their models, but it was not supplied with this one. And because I also wanted to try the turntable in my two listening areas in my house, I would be moving the turntable upstairs and downstairs and then releveling it. Upstairs is where a powerful Sony ES integrated amp lives with some KEF speakers. And the room has carpeting and curtains to absorb audio reflections. Downstairs is a more lively, highly reflective sound environment, with just a few rugs. And there are some very big speakers down there. But moving the turntable upstairs and downstairs made me realize another issue…with the dust cover. Unlike my SL-1500c and SL-B260, the dust cover isn’t attached. This leaves you to find a place to put the dust cover while you are playing records. The SL-1500c has an easily removable dust cover but it is attached with the aid of magnets and a slot. The SL-1200MK7 also has magnets to hold it in place, but no slot to really hold it down. I am okay with it, however, since my Dual 1229 also has a cover that is not attached (and it doesn’t even have a magnet). And before I got started with my listening tests a new problem developed—hum. I haven’t been grounding my turntables in years, and I never had an issue. This time the hum was very noticeable but went away easily by attaching the included grounding cable. After that, how did it sound? Well, I tried a variety of genres, from classical, to jazz, to punk, to rock, folk, acoustic, and more. In the basement, where I started, with the Ortofon, I discovered the turntable was detailed, revealing, and rather unforgiving. The highs seemed a bit bright, leaning towards harsh. Each scratch, pop, and other defect was on full display. There was real clarity in the highs and the snap of the snare and the long decaying shimmer of the cymbals. The bass was punchy but not overly present. I ended up turning down the treble one notch, and that helped. When I tried each of the Shure cartridges, they were more forgiving of the source. The pops and scratches were there, but subdued. The detail remained and the music was transparent…and there was no sense that the sound would become fatiguing. In all cases, The Shures and the Ortofon, the depth of field was apparent with good separation and they each presented a wide sound stage. I would probably say the Ortofon just needs a bit more of a break in period so its stylus shank can be less stiff and become more relaxed. Moving upstairs, with a softer listening environment, all of the cartridges sung. While each was different in subtle ways: one may bring the bass more forward and another show off in the midrange with vocal performances of remarkable clarity, and still another perfectly articulating the pluck of a guitar string. This turntable really breathed new life into my vinyl as well as my variety of cartridges. If I had to determine a difference between the 1500c and the 1200MK7 I would say I couldn’t really tell. They are both darn fine pieces of engineering that will serve anyone well regardless of their musical tastes. If I had really been able to do a side-by-side comparison, then I might be able to tell some subtle difference, but in everyday listening the differences would be unnoticeable. While I still have a soft spot in my heart for my old Dual 1229 and SL-B260, the engineering that Technics has put into their new turntables justifies a move up. Pros: • A massive stiff plinth that minimizes vibration • A newly developed coreless direct drive motor with extremely accurate speed with negligible wow and flutter • Large insulator feet to isolate the turntable • Extra settings found beneath the platter to change the color of the strobe, allow reverse playback, enable 78 rpm playback, and to adjust the torque and brake settings. And these dips are easily reached through the finger holes on the platter. • A Lamborghini collector record • A Technics and a Lamborghini sticker-but I would never put either on the turntable • Sound is clean and precise without any added timbre of its own • It has a pop-up stylus light for dark environments Cons: • It needs a detachable dust cover like the 1500c • An alignment jig would be nice • It would be nice to have an extra head shell for quick swap outs • No cartridge included This is probably one of the more expensive turntables that Best Buy sells, but you will have to spend a lot more money to get better performance. And it has recently gone on sale. I highly recommend getting this limited edition before it is gone.

The Technics SL-1200MK7 marked a significant evolution in the SL-1200 series, blending the iconic build quality of its predecessors with modern enhancements tailored for DJs and audiophiles alike. Released back in 2019/2021 as part of the revival of the Technics brand, the SL-1200MK7 maintains the legacy of the series while introducing features that make it competitive in today's dynamic music landscape. The Lamborghini Edition (model SL-1200M7BPY) turntables build on that same idea, adding in some Lambo flair to an already top-tier machine. In a sense, this review is mostly about that machine. The Lamborghini Editions feature a few flourishes that stand out as a special edition, which are listed below: The slipmat is inspired by the Lamborghini logo You get a special picture disc record included that has sounds of Lambo engines (the V12’s sound really good paired with a good system), and the design is inspired by the Revuelto Lamborghini and Technic stickers Special paint design that’s exclusive to the special editions Otherwise, it’s the same great SL-1200MK7 that is top of the line in a lot of aspects as a turntable. The SL-1200MK7 continues Technics' renowned tradition of crafting turntables with exceptional durability and precision engineering. Its aluminum die-cast chassis, reinforced with ABS and glass fiber, ensures the turntable is lightweight yet robust, capable of enduring the rigors of both home use and demanding club environments. The addition of a new coreless direct-drive motor eliminates cogging, delivering smooth, consistent rotation that enhances playback precision. The damped feet and adjustable tonearm height provide further customization, making it highly versatile for different setups. The MK7 is designed with DJs in mind, catering to both home enthusiasts and club professionals. The adjustable pitch control offers precise tempo manipulation, a feature beloved by DJs. The reverse play function, introduced for the first time in the SL-1200 series, opens up creative possibilities for scratching and mixing. Its compact design and lightweight build, with the weight distribution being tweaked in the latest iteration. This shows where the design feels more solid and heavy, in some ways at least. It’s not a bad thing, per se, but noticeable if you’re comparing different tables back to back. That said, in a club or booth setting, the SL-1200MK7 is equally at home. Its stable motor and vibration-resistant chassis ensure performance remains unaffected even in high-volume environments. The bright, adjustable strobe light and replaceable LED target light are thoughtful touches, providing visual cues in low-light settings. Thankfully, Technics incorporated modern aids into the SL-1200MK7 without compromising its classic appeal. The coreless motor represents a leap forward, reducing unwanted rotational irregularities while maintaining the responsiveness that DJs have come to expect from the SL-1200 series. The platter is dampened with rubber to minimize resonance, further enhancing sound quality. Additionally, the inclusion of a digital pitch controller ensures greater accuracy compared to the analog systems in older models. The MK7 also benefits from updated electronics for improved energy efficiency, contributing to the turntable’s long-term reliability. While Technics has avoided overloading the unit with unnecessary features, these subtle refinements modernized the SL-1200MK7 for the 21st century. When it comes to sound quality, the SL-1200MK7 is an impressive performer. Its coreless motor and stable platter rotation contribute to an exceptionally low wow and flutter, ensuring accurate playback. The tonearm, a hallmark of the SL-1200 design, tracks records with precision, reproducing audio with clarity and depth. Whether used with high-end cartridges for audiophile listening or durable DJ cartridges for scratching and mixing, the turntable delivers consistent, high-fidelity sound. It’s also worth mentioning, for those that are unaware, you don’t get a cartridge with the SL-1200MK7, and these special edition Lamborghini models are no different. For vinyl enthusiasts, the SL-1200MK7 offers a clean, warm playback characteristic that captures the nuances of analog recordings. For DJs, the precise motor control ensures reliable cueing, scratching, and beatmatching, maintaining the sound integrity even under demanding conditions. All this said, it’s hard to specifically see who this model of turntable is for, though it’s a striking and fun way for Technics to spice up the standard colorway of the SL-1200MK7. There is a $400-500 price increase for this branding. Value wise, it’s a hard sell. But, if you find it on sale and are interested in the the unique orange, yellow, or green colorways, you’d be hard-pressed to find something better and that will deliver on the price tag. Plus, it will certainly be a conversation piece in any setting.

I used an Ortofon 2M Bronze stylus (moving magnet; nude fine line diamond) on the turntable. It was connected to a Marantz NR1711 receiver with built-in ‘Phono’ hookup (with pre-amp) and Hi-Fi Fluance bookshelf speakers This is a perfect mid-range turntable. The setup was typical and the directions were written extremely well. I find a need to always re-re-read directions before installing the stylus, given the price point. I already had a scale to adjust the tracking force. I would have liked to see the plastic guide to measure stylus ‘over-hang’ under the head come with the turntable, but a piece of white printer paper helps as well. Once everything was put together and adjusted and you step back to take it in, it’s exhilarating, and it would be hard to wait and play something. It says ‘speed’ and ‘sport’ when you look at it and different from previous turntables, this one needs, figuratively speaking, driven. First, Metallica’s Black album. It was 70s – 90s hard rock and then other genres. The carbon fibre badging and patterns look incredibly sharp. The sound is wonderful. Aesthetically, it just looks super-cool due to the orange pattern, which makes for a non-traditional, aggressive style. That sentiment was magnified when I played the Lamborghini record that came with the turntable. It was cool to listen to, and will be the closest thing I get to a Lamborghini. The plinth doesn’t have much weight to it; I could tip the end of it up with one finger, and I believe it was thick plastic. I expected the 30 – 40 pound aluminum, though the lighter unit made it much easier to install the power, ground, and RCA’s. It is constructed well and is quite sturdy. The platter is really light in weight, which should not have been the case. The black slipmat with the white Lamborghini logo was made of light felt, and comes up when you take the record off, and is therefore a nuisance as well as a total mistake. It bears the Lamborghini logo and should NOT give a negative reaction when it comes off with the record. It’s a collaboration and it’s Lamborghini; this should be changed ASAP to a hard rubber that stays put on the platter. Everything is well-constructed, including the controls and the adjustable feet. The vibration-dampening feet likely make up for a light overall weight. I played with my kids and my dog about 4’ while listening to my vinyl, with no skipping. I would have liked to see a removable hinge on the cover so I didn’t have to set it down and collect a static charge or risk getting cracked. The rubber bumpers on the lid was a nice compromise. Things like the cue lever and tone arm worked smoothly and deliberately.