Sanus - Classic Fixed TV Wall Mount for Most 32" - 63" Flat-Panel TVs - Black
- General
- Product Name: Classic Fixed TV Wall Mount for Most 32" - 63" Flat-Panel TVs
- Brand: Sanus
- Model Number: MLL10-B1
- Features
- Mount Profile: Flush (The view of the product when seen attached to a wall or surface.)
- Mount Style: Fixed
- Compatibility
- Maximum Weight Capacity: 130 pounds (The maximum load that can be supported by the product.)
- Compatibility: Most 32" - 63" flat-panel TVs weighing up to 130 lbs.
- Mount Location: Wall
- Maximum Television Size: 63 inches
- Minimum Television Size: 32 inches
- Dimensions
- Product Height: 18.5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 29 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 1.25 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Material
- Mount Material: Metal
- Warranty
- Manufacturer's Warranty - Parts: 3 years limited
- Manufacturer's Warranty - Labor: 3 years limited
- Other
- UPC: 793795523846
This Sanus MLL10-B1 wall mount features a fixed design that mounts your TV close to the wall for a flush appearance and heavy-gauge steel construction for durability.
- Compatible with most 32" - 63" flat-panel TVs: Up to 130 lbs. for sturdy support.
- Lateral shift: Allows you to slide your TV left and right for ideal placement.
- Heavy-gauge steel construction: With a high-tech powdercoat finish for durability and a sleek look.
- Fixed design: Mounts close to the wall for a flush appearance.
- Locking mechanism: Provides secure mounting.
Whats Included
- Sanus Classic Fixed TV Wall Mount for Most 32" - 63" Flat-Panel TVs
- Installation hardware
- Owner's manual
Q: Does this mount work for LCD tvs?
A: Yes my Sony 42" led Lcd led fits well. It seemed not go have enough washers.my husband had to hunt for more.
A: No, this does not tilt nor swivel. It will slide on the bar from left to right, but not too much as it will reveal the plate behind it. It's fixed to the wall. You will need to attach it at the same height you will be viewing from.
Q: Will this work with a Dynex DX55L150A11?
A: It should work long as the mounting wholes on the television are not wider than about 28 inches apart.
Q: Will this wall mount work on a Samsung 55" UN55D8000Y?
A: It should work long as the mounting wholes on the television are not wider than about 28 inches apart.
Q: Would this work with a 40" Phillips LED tv
A: It should work long as the mounting wholes on the television are not wider than about 28 inches apart.
Q: Is this a good wall mount for the Panasonic TH-50PX60U?
A: Long as the mounting wholes on the rear of the TV are not wider then the mounting plate for the wall.
Q: What material is this particular wall mount made out of?
A: Stamped steel
Q: Would this wall mount work on an angled surface (angled tray ceiling)
A: Since its low profile it may not allow the TV to clear the angle of the corner.