Bowers & Wilkins - STAV 24 S2 24" Speaker Stands (Pair) - Black
- Key Specs
- Compatibility: Most bookshelf speakers.
- Maximum Weight Capacity: 50 pounds (The maximum load that can be supported by the product.)
- General
- Product Name: STAV 24 S2 24" Speaker Stands (Pair)
- Brand: Bowers & Wilkins
- Model Number: STAV24 S2
- Color: Black
- Compatibility
- Compatibility: Most bookshelf speakers.
- Maximum Weight Capacity: 50 pounds (The maximum load that can be supported by the product.)
- Features
- Stand Type: Freestanding
- Hardware Included: true
- Stand Material: Metal
- Dimensions
- Product Height: 25 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 9.5 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 11.75 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 18 pounds (The out of box weight of the item.)
- Material
- Stand Finish: Other
- Other
- UPC: 714346320738
Bowers & Wilkins STAV 24 S2 stands are a great match for a variety of bookshelf speakers, including our 607 and 606 speakers. Twin metal vertical columns can be filled with sand to for additional mass loading which provides additional support and helps dampen vibration and imporove bass.
- Compatible with bookshelf speakers: The top plate measures 5.93" by 7.43"
- Twin vertical metal columns: Can be filled with sand (not included) to help eliminate vibration and offer reliable support.
- Includes an Allen wrench, assembly hardware, floor spikes and rubber feet: To help simplify setup.
- 24" Tall: 24" Tall without using spikes or rubber feet.
Whats Included
- STAV 24 S2 Speaker Stands (Pair)
- Allen wrench, hardware, floor spikes, rubber feet
- Owner's manual
Q: Would these hold the 705 S2?
A: They will, but there is no mechanism to secure the speakers to the top of the stands. We recommend you use a dime sized patch of Blu Tac in each of the four corners on the top the stands and then place the speaker on top.
Q: Do the holes on the top of this stand line up with the screw mounts of the B&W 707 S2?
A: They do not. That said, you can use a small blob of blu-tac on the top of the STAV-24 and press the 707S2 onto the top. Works beautifully and provides a very tight connection.
Q: what are the dimensions of the top plate on these stands?
A: Width 7". Depth 8"
A: B&W advised me to use any adhesive putty product. I used Elmer's Tac 'N Stik and it works fine. I put four 1" pieces under each speaker and pressed the speaker down. It adheres well enough without bonding it permanently.
Q: What is the height of the stand from the floor to the top of the stand where the speaker will rest.
A: The stand height is 24 inches.
Q: Can you run power cords through these stands to hide the power cord?
A: While that is not a feature of these stands, you can "hide" cabling by using black tie wraps to secure cables to the back of the stands.
Q: will these stands work with b&w 805 d3
A: Will they work? Yes. Ideal? No. The dedicated stand for the 805D3 (FS805Stand) has a top plate that is large enough to support the entire speaker while the top plate of the STAV24 is much smaller and better suited to something like the 606 or 607 loudspeaker. Additionally, there is no way to secure the 805D3 to the STAV24 outside of using blutac. Overall, this solution will be less secure than using the FS805D3 stand.
A: Hello - it is really down to what is most convenient for the use you will have for the stands.
