Cable Leader - 14 AWG Right-Angle Computer Power Cord, NEMA 5-15P to 90-Degree IEC C13, 15A 125V for PC, Monitor, Server Rack - Black

Does a straight power cord stick out behind your PC, monitor, or projector and keep it off the wall? This Cable Leader 16 AWG right-angle computer power cord is a 3-prong AC power cord with a standard NEMA 5-15P plug for any 120V outlet, power strip, or UPS and a 90-degree IEC C13 connector that turns the cord along the back panel instead of straight out, rated 13A at 125V for up to 1625W. Three 16 AWG copper conductors run inside a flexible black SJT jacket with molded ends and UL Listed construction. A universal power cord replacement for any device using an IEC C14 inlet, including desktop PC power supplies, monitors, printers, projectors, scanners, and network switches. Best for: a PC power cable or monitor power cable behind a desk, on a wall mount, on a ceiling-mounted projector, or in an AV cabinet where a straight C13 has no room. Not for: loads above 13A, 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.

Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.

Is the power cord behind your monitor or PC too long, lost, or sticking out from the wall? This Cable Leader replacement power cord pairs a standard NEMA 5-15P 3-prong grounded plug with a 90-degree right-angle IEC 60320 C13 connector, so the cord sits flush against the back of your device and lets you push gear tight to the wall in cramped setups. It is built from 18 AWG, 3-conductor copper wire with a flame-retardant VW-1 PVC jacket and fully molded ends, rated for 125V at 10A (1250W) for indoor use, and carries both CSA and UL Listed approvals. The C13 connector is the universal computer power socket used on most desktop computers, monitors, printers, scanners, and many TVs and AV receivers; it does not fit C7 (figure-8), C5 (clover), or C19 inlets. Best for: replacing a standard 3-prong C13 computer or monitor power cord in tight, wall-mounted spaces. Not for: C7/C5/C19 devices, 2-prong gear, or use as a voltage adapter. Made with RoHS-compliant materials and sample-tested during production.