Cable Leader - 14 AWG Shielded Computer Power Cord Replacement, 3-Prong NEMA 5-15P to IEC C13, 15A 125V for PC, Monitor, Audio Amp - Black
Reviews coming soon
About this product
Need a replacement power cord for a PC, monitor, or audio amp that sits next to audio or network cables? This Cable Leader 14 AWG shielded computer power cord is a standard 3-prong AC power cable with a NEMA 5-15P plug for any 120V outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W. A grounded shield, bonded to the ground pin by a drain wire, wraps all three conductors to help keep the cord's electrical noise out of nearby cables, inside a black SJT jacket with molded ends and UL Listed construction. A universal power cord for any device using an IEC C14 inlet, including PCs, monitors, printers, projectors, powered speakers, and amps. Best for: a computer cord, monitor cord, or amp power cord in a crowded desk, rack, or AV cabinet, or a high-wattage PC power supply (PSU). Not for: fixing ground-loop hum, 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
Cable Length
6'Features
Keep Cord Noise Away From Nearby Audio and Data Cables
Power cords and signal cables usually share the same tight space behind a desk, rack, or AV cabinet. This cord adds a grounded shield: a shield layer wraps all three conductors, and a drain wire bonds it to the ground pin at both ends, helping contain the electrical noise an unshielded cord gives off near audio, video, and network cables. It still works as a direct replacement for any standard 3-prong computer cord.
Rated 15A / 125V (1875W) - 14 AWG, UL Listed
Three 14 AWG copper conductors are rated for a 15 amp load at 125 volts, up to 1875 watts, which is 50 percent more current than a typical 10A 18 AWG computer cord. That headroom suits 1000W-plus PC power supplies, workstations, 3D printers, and higher-power audio amps. UL Listed construction, manufactured to RoHS environmental standards.
Fits 3-Pin C14 Inlets - Not for C7, C5, or C20
Compatible with any device using an IEC C14 inlet. Quick check: desktop PC, monitor, or printer with a 3-pin C14 inlet - Yes; guitar or audio amp, powered speaker, or projector with a C14 inlet - Yes; C7 figure-8 or C5 cloverleaf laptop charger - No; C20 high-current inlet - No, it needs a C19 cord. For loads under 10A, our 18 AWG shielded C13 cord is the lighter option.
Heavy-Duty 14 AWG SJT Cord - Built for Racks and Desks
The black SJT jacket is VW-1 flame-rated and rated to 105°C, yet flexible enough to route behind a desk, through rack cable management, or into an AV cabinet. Both the NEMA 5-15P plug and the C13 connector are molded over the terminations for strain relief during repeated plugging. The 3 ft length works as a short power cord for tight setups.
Sample-Tested Production - Cable Leader Direct Support
Each batch is sample-tested during production for continuity and fit. Manufactured to RoHS environmental standards. If your cord arrives defective or stops working in normal use, Cable Leader handles replacement requests directly - no manufacturer redirects.
Specifications
- Cable Length6 feetConnector Type (End 1)NEMA 5-15PGender (End 1)MaleConnector Type (End 2)IEC/EN 60320 (IEC 320)Gender (End 2)FemaleIn-Wall RatedNo
Reviews
This product doesn't have any reviews yet.
Compare similar products
Need a replacement power cord for a PC, monitor, or audio amp that sits next to audio or network cables? This Cable Leader 14 AWG shielded computer power cord is a standard 3-prong AC power cable with a NEMA 5-15P plug for any 120V outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W. A grounded shield, bonded to the ground pin by a drain wire, wraps all three conductors to help keep the cord's electrical noise out of nearby cables, inside a black SJT jacket with molded ends and UL Listed construction. A universal power cord for any device using an IEC C14 inlet, including PCs, monitors, printers, projectors, powered speakers, and amps. Best for: a computer cord, monitor cord, or amp power cord in a crowded desk, rack, or AV cabinet, or a high-wattage PC power supply (PSU). Not for: fixing ground-loop hum, 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.
Need to power a UPS, rack PDU, or server with a C20 inlet from a standard wall outlet? This Cable Leader power cord pairs a NEMA 5-15P 3-prong grounded wall plug with an IEC 60320 C19 connector, delivering wall-outlet power directly to higher-power equipment without a PDU-to-device jumper. It is built from 14 AWG, 3-conductor copper wire with a flame-retardant VW-1 SJT jacket and fully molded ends, rated 15A at 125V for indoor use, and the cordset is UL Listed. The C19 connector fits the C20 inlets commonly found on rack PDUs, larger UPS units, servers, and core switches; it is larger than the common C13 and will not fit C14 inlets, and the 5-15P plug limits the cordset to 15A even though some C19 hardware exists in 20A versions. Best for: powering a C20-inlet UPS, PDU, or server from a standard North American wall outlet within 15A/125V. Not for: C13/C14 devices, 20A applications, 250V circuits, or outdoor use.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore tech essentials Sponsored
BlueParrott Pro B450 Wireless Bluetooth Mono Headset with 98% AI Voice Isolation Mics, ANC audio, and All-Day Comfort
Top Deal$169.99The price was $199.99
Keep exploring
Anker USB C to USB C Cable, 2-Pack 3.3 FT (1 m) Type C 100W Fast Charging Cable
$11.99The price was $13.59Acer USB C to HDMI Cable for Home Office 6.6FT (4K@60Hz), High-Speed Type C to HDMI 2.0 Braided Cord
$12.99The price was $13.99
