DS18 Audio - FRP 5-Channel Class D Car Amplifier with Remote Level Control - Red

The NXL-X1200.5D is a 5-channel car amplifier from the DS18 NXL-X series, built as a Class D design. It delivers 4 x 150 watts RMS at 4 ohms and 600 watts RMS at 2 ohms. Total harmonic distortion is rated at less than 0.05% with a signal-to-noise ratio of greater than 85dB. A selectable (HPF/Full/LPF) / LPF Fixed (SUB) crossover covers 40Hz-2KHz / 50Hz-250Hz (SUB), so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-18dB (SUB) centered between 42Hz (SUB). A IP67 waterproof rating makes it suitable for boats, side-by-sides and powersports vehicles where the amplifier is exposed to water and spray. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

Arc Audio X2 850.5 Multi-Channel Amplifier (5-Channels) Multi-Channel Amplifier (5-Channels) Microprocessor Class-D Design Designed And Engineered By Robert Zeff High-Frequency Power Supply Design For Improved Signal Transparency And Overall Sound Quality) Level 1 X2 Cosmetics Package - Texture Coated Stamped Steel Cosmetic Cover With Aluminum Logo Badge. (Changable to Level-2 XDi Cosmetics) Single Side Connection Design Full-Range Design Nickel Plated RCA Terminals Quick Disconnect Speaker Terminal Plugs Audiophile Class-D Output Filter Networks Detailed Micro Processor Controlled Protection Large, High-Frequency Switching Power Supplies RCA Inputs Are Compatible With Speaker Level Inputs Fault Codes Storage Of The Last Protection Code Detected High Signal To Noise Ratio Without Compromising Power Output Fully Balanced Input Stage Significantly Increases Flexibility Ultra-Low ESR, High-capacity Power Supply Storage Capacitors Flexible Mounting Orientation For Vertical Or Horizontal Installations Next Generation High-Speed Class-D Technology Powering All XDi Amplifiers. Bridged Mode Auto Detect Turn-On Works With Most Chip Based OEM Head Units Precision Filtering Isolates The Power Supply Reducing Unwanted Interference In Radio Reception Block Type Terminal Connections Specifications - 4-Channels @ 4 Ohms (Ch 1-4) - 85 Watts 4-Channels @ 2 Ohms (Ch 1 - 4) - 125 Watts 2-Channel @ 4 Ohms (Ch 1-4 Bridged) - 250 Watts 1-Channel @ 4 Ohms (Ch 5) - 225 Watts 1-Channel @ 2-Ohms (Ch 5) - 400 Watts Frequency Response - 20Hz - 20kHz Crossover Range (Ch 1-4) - 50Hz - 550Hz Crossover Range (Ch 5) - 30Hz - 230Hz Bandpass Capable - No Bass Boost - Variable 0-12 dB @ 45Hz Cosmetic Trim - XDi Trim Level 1 Remote Level Control Included - Yes Input Sensitivity (Low) - 200mV - 3.5V Fuse - 3 x 30 Amp Dimensions - 12.42"(L) x 6.268"(W)x2.162"(H)

The FX1 is a monoblock car amplifier from the DS18 FX series, built as a Class D design. It delivers 900 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.08% with a signal-to-noise ratio of 92dB. A selectable Fixed LPF crossover covers 50-250Hz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0~12dB centered between 50Hz. Marine-grade construction makes it suitable for boats, side-by-sides and powersports vehicles. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.