DS18 Audio - PU Single 10" Loaded Sealed Subwoofer Enclosure with Built-in Amplifier, 350W RMS
Reviews coming soon
About this product
The PU110A is a loaded subwoofer enclosure with a sealed box. It comes with a 10" subwoofer already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 13L / 0.48ft3. Construction is 5/8" / 15mm MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
Features
Built Specifically for Pickup Trucks
Designed to tuck under or behind the seat of a pickup, where a standard enclosure simply will not fit. Your back seat and cargo space stay usable and the cab stays uncluttered.
Amp and Sub in One Sealed Box
350W RMS / 700W max from a built-in Class D monoblock, tuned specifically to the 10" shallow subwoofer inside. Auto turn-on, high-level and low-level inputs and an RCA pass-through mean it integrates with a factory radio or a full aftermarket system.
Bass Knob Included
A remote level control comes in the box, so you can turn the sub up for a hip-hop track and back it down for a podcast from the driver's seat, without pulling a panel to reach a gain screw.
Sealed and Tuned to 45Hz
The internal sealed enclosure gives a 30-250Hz response with a 45Hz -3dB point, which is the range that fills out a factory system. Tight, punchy bass rather than one-note boom.
Protection Circuitry Built In
The onboard amplifier includes protection against overload and thermal stress, so a hard night of high-volume playback does not turn into a warranty claim.
Specifications
- RMS Power350 wattsImpedance2 ohmsSensitivity85 decibelsDual Voice CoilsNoWoofer Size10"
Reviews
This product doesn't have any reviews yet.
Compare similar products
The PU110A is a loaded subwoofer enclosure with a sealed box. It comes with a 10" subwoofer already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 13L / 0.48ft3. Construction is 5/8" / 15mm MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
There is nothing like a good subwoofer to bring out the full range and power of your favorite music. The TS-D10LB shallow-mount sealed subwoofer enclosure is perfect for areas where a 10” subwoofer will not fit. The enclosure is sized for spots as shallow as 6" deep, so the bass you need will fit into trucks and smaller cars. Its carpet covering and steel mesh grille help protect the subwoofer and give it a clean, finished look. This subwoofer features an injection-molded polypropylene IMPP™ cone reinforced with aramid fiber, designed to remain stable even at high volume levels. The butyl rubber surround helps minimize distortion, and the stamped steel basket adds rigidity, ensuring the bass stays accurate. With up to 350 watts RMS power handling, you will have enough power to crank up the volume. Its 2-ohm voice coil allows optimization with most mono subwoofer amplifiers to obtain the best output.
The PU210A is a loaded subwoofer enclosure with a sealed box. It comes with 2 10" subwoofers already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 16L / 0.56ft3. Construction is 5/8" / 15mm MDF finished in black carpet. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
The SB10A is a loaded subwoofer enclosure with a sealed box. It comes with a 10" subwoofer already installed and wired, so you only add an amplifier — or nothing at all, since the amplifier is built in. Total power handling is 350 watts RMS and 700 watts peak. The built-in digital amplifier is matched to the subwoofer, so there is no guesswork in gain setting or impedance matching. The box has an internal volume of 12L / 0.42ft3 and a port tuned to N/A. Construction is 0.59" MDF finished in non-woven fabric. Everything is assembled and ready to drop in, which saves the cost and time of building a custom enclosure.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Enjoy your ride Sponsored
Keep exploring
$76.31The price was $81.12
$598.00The price was $698.00
$159.96The price was $199.95
$39.99The price was $40.99
$142.47The price was $144.51
$471.95The price was $589.95
