DS18 Audio - SXE 4-Channel Class D Car Amplifier, 4 x 275W RMS at 4 Ohm - Red
Reviews coming soon
About this product
The SXE-4000.4D/RD is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 750 watts RMS at 4 ohms, 4 x 430 watts RMS at 2 ohms and 4 x 275 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between No. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Color
RedFeatures
4 x 275W RMS 4-Channel Amplifier
Delivers 2 x 750 watts RMS at 4 ohms, 4 x 430 watts RMS at 2 ohms and 4 x 275 watts RMS at 4 ohms. Power scales as impedance drops, so check the rating at the impedance you plan to run before matching speakers.
Class D Car Amplifier Design
A Class D topology runs cooler and draws less current than a conventional amplifier at the same output, with rated efficiency of 86%. That means less strain on your electrical system and a smaller chassis for the same power.
Bridgeable Channels for a Subwoofer
Bridge the channels to combine their output and drive a subwoofer or a pair of higher-power speakers from the same amplifier, which lets one amp cover both your speakers and your bass instead of buying two.
Adjustable Crossover and Bass Boost
Onboard tuning includes a selectable HPF/FULL/LPF crossover covering 40Hz-2KHz and bass boost adjustable from No centered between No. Send each channel only the frequencies it should play and dial in the low end without adding an external processor.
Protection Circuitry and Cooling
Built with over-load, dc output, short circuit output and clipping protection, so the amplifier shuts itself down before a wiring fault, a short or overheating can damage it or your speakers. That is what keeps 4-channel amplifiers alive in daily-driven vehicles.
Specifications
- Amplifier ClassDNumber Of Channels4Bass BoostNoneBridgeableYes
Reviews
This product doesn't have any reviews yet.
Compare similar products

The SXE-4000.4D/RD is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 750 watts RMS at 4 ohms, 4 x 430 watts RMS at 2 ohms and 4 x 275 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from No centered between No. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The G3600.4D is a 4-channel car amplifier from the DS18 G series, built as a Class D design. It delivers 2 x 740 watts RMS at 4 ohms, 4 x 420 watts RMS at 2 ohms and 4 x 300 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.01% with a signal-to-noise ratio of greater than 90dB. A selectable LPF / FLAT / HPF crossover covers 50Hz-4KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from N/A centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The SXE-3000.4D/BK is a 4-channel car amplifier from the DS18 SXE series, built as a Class D design. It delivers 2 x 500 watts RMS at 4 ohms, 4 x 320 watts RMS at 2 ohms and 4 x 200 watts RMS at 4 ohms. The channels are bridgeable, so you can combine them to drive a subwoofer or a pair of higher-power speakers from the same amplifier. Total harmonic distortion is rated at 0.05% with a signal-to-noise ratio of 90dB. A selectable HPF/FULL/LPF crossover covers 40HZ-2KHZ, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from NO centered between N/A. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.

The FRP-2.4K4/RD is a 4-channel car amplifier from the DS18 FRP series, built as a Class D design. It delivers 4 x 250 watts RMS at 4 ohms, 4 x 400 watts RMS at 2 ohms, 4 x 600 watts RMS at 1 ohms, 2 x 750 watts RMS at 2 ohms and 2 x 1000 watts RMS at 1 ohms. Total harmonic distortion is rated at 0.5% with a signal-to-noise ratio of 90dB. A selectable Yes, HPF/FULL/LPF crossover covers 10Hz-2KHz, so you can send each channel only the frequencies it should reproduce. Bass boost is adjustable from 0-12dB centered between 50Hz. A remote level control is included so you can adjust output from the driver seat. Match the amplifier to the RMS rating of your speakers or subwoofers and set the gain to that rating for clean, reliable output.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.










































