DS18 Audio - ZXI 8" High Excursion Subwoofer with Quad Stacked Magnet, 600W RMS Dual 2-Ohm
Reviews coming soon
About this product
The ZXI8.2D is an 8" car subwoofer from the DS18 ZXI series. It handles 600 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires a 7.31" cutout diameter and 5.51" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.
Woofer Size
8"600W RMS / 1200W Peak Power Handling
Rated at 600 watts RMS and 1200 watts peak. Behind that rating: 2" voice coil on a black aluminum former wound with CCAW wire and a 104 oz ferrite motor. That is what lets an 8" cone move this much air without losing control.
Dual 2-Ohm Voice Coil
Dual voice coils let you wire multiple subwoofers in series or parallel to reach the final impedance your amplifier is stable at, which gives you room to grow the system later.
High-Excursion Motor for Deep Bass
The high-excursion motor and suspension allow the cone to travel farther than a conventional subwoofer, which moves more air and produces the low frequencies you feel rather than just hear. Give it a properly tuned sealed or ported enclosure to take advantage of it.
Fitment and Recommended Enclosure
This 8" subwoofer requires a 7.31" cutout diameter and 5.51" of mounting depth. DS18 recommends a sealed enclosure of 0.6 cu ft and a ported enclosure of 1 cu ft tuned to 35Hz. Check these numbers against your enclosure before ordering: enclosure volume and tuning change the low-frequency response as much as the driver does.
Quad Stacked Magnet
A quad stacked magnet assembly increases motor force, which improves cone control at high power and helps the subwoofer stay accurate instead of getting loose and boomy when driven hard.
- RMS Power600 wattsPeak Power Handling1200 wattsImpedance2 ohmsSensitivity86 decibelsDual Voice CoilsYesWoofer Size8"
Reviews
This product doesn't have any reviews yet.
Compare similar products

The ZXI8.2D is an 8" car subwoofer from the DS18 ZXI series. It handles 600 watts RMS and uses dual voice coils at 2 ohms per coil, so you can wire multiple subwoofers to the final impedance your amplifier is stable at. Peak power handling is 1200 watts. The high-excursion motor and suspension let the cone travel farther for deeper low-frequency output. The motor uses a quad stacked magnet assembly. Mounting requires a 7.31" cutout diameter and 5.51" of mounting depth, so confirm your enclosure before installing. Pair it with a matching monoblock amplifier and a properly tuned enclosure to get the most low-frequency output.

The Pioneer A Series of Shallow Mount Subwoofers uses a highly rigid cone made with MICA injected molded resin which creates a rigid and durable cone. This gives them the ability to produce accurate bass. The TS-A3000LS4 12 in. shallow mount subwoofer has multiple, patent-pending features that deliver the big bass performance of a full size subwoofer, but in a compact design that can be installed either behind or under seats, depending on the type of vehicle.

When Kicker created the original Hideaway compact HS8 powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. The HS10 sub adds the extra punch of a 10" speaker and a built-in 180-watt amplifier to give you really impressive bass response from a sub that will still fit almost anywhere. With a Kicker 10" woofer, you can expect serious low end, and you can install the HS10 under most seats to bring the bass right up close. The tough all-aluminum chassis and stylish metal grille protect the speaker and deliver great sound. High- and low-level inputs give you plenty of options for hooking up your sub, and the HS10 can accept input signals from 0.25 to 40 volts so it works with almost any vehicle without adding a line output converter.The Hideaway includes an adjustable low-pass crossover, a subsonic filter to improve efficiency, a phase switch, and a variable +6 dB bass boost adjustable with the included remote control bass knob. The HS10 also offers two auto turn-on options. The package includes a wiring harness for power, signal and remote turn-on connections with a quick-connect Molex plug to make installation simple.

The CompRT Down-Firing Subwoofer Enclosures come loaded with a passive reFLEX subwoofer and KICKER CompRT active subwoofers. The patented design of the TRTP was created in-house by KICKER engineers. The new benchmark in ultra-thin, pre-loaded enclosures, the TRTP’s unique shape and beefy construction are the perfect combination of convenience and reliability. Place the TRTP under your truck seat or cargo area for great bass – no grille needed! Covered in stylish black carpeting and built with thick MDF, these tough enclosures take serious power without taking up needed space. Heat is the enemy of endurance. To make our subs even more reliable, KICKER engineers developed Forced-Air Cooling to help our CompRT subs run 25 percent cooler. RoHS Compliant.
| Pros for DS18 Audio - ZXI 8" High Excursion Subwoofer with Quad Stacked Magnet, 600W RMS Dual 2-Ohm | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Bass, Size, Installation Ease, Power | Sound Quality, Size, Bass, Design, Price |
| Cons for DS18 Audio - ZXI 8" High Excursion Subwoofer with Quad Stacked Magnet, 600W RMS Dual 2-Ohm | |||
| There were no cons for this product— | There were no cons for this product— | There were no cons for this product— | Durability, Power Handling |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.


































