Eagle Aspen - 25 dB UHF/VHF/FM Distribution Amp - Silver
Reviews coming soon
About this product
High output capability provides the Eagle Aspen® 25-dB UHF/VHF/FM Distribution Amp lower distortion levels than its competitors. Featuring UHF/VHF/FM broadband, 25 dB gain (54 MHz–215 MHz), 22 dB gain (475 MHz–800 MHz), and 18 dB at 890 MHz, this amp is of exceptional quality. It helps protect against lightning, is low noise, and runs on 100 to 240 volts AC power.
Features
High Output Capability
Provides lower distortion than economy models for clearer signal transmission across your devices
Wide Frequency Range
Supports UHF, VHF, and FM broadband frequencies for versatile use
Strong Signal Gain
Delivers 25 dB gain between 54 MHz and 215 MHz to boost your signal strength
Additional Gain Range
Offers 22 dB gain from 475 MHz to 800 MHz for enhanced performance in higher frequencies
Exceptional Quality
Built to provide reliable and consistent amplification for your distribution needs
Specifications
- Continuous Watts x Channel @ OhmsNot SpecifiedNumber of Channels1Network Connector(s)No network connectorsWireless ConnectivityNone
Reviews
This product doesn't have any reviews yet.
Compare similar products

High output capability provides the Eagle Aspen® 25-dB UHF/VHF/FM Distribution Amp lower distortion levels than its competitors. Featuring UHF/VHF/FM broadband, 25 dB gain (54 MHz–215 MHz), 22 dB gain (475 MHz–800 MHz), and 18 dB at 890 MHz, this amp is of exceptional quality. It helps protect against lightning, is low noise, and runs on 100 to 240 volts AC power.

The Antennas Direct® ClearStream® JUICE8 Amplifier boosts the TV signal from your indoor or outdoor TV antenna or CATV system and distributes that signal to as many as 8 TVs. Distributing signal to multiple TVs and using 50 ft. or more of coaxial cable can result in some signal loss. The JUICE8 helps overcome these signal challenges by strengthening the signal coming in from the TV antenna’s coaxial cable for consistent reception and picture quality. This 8-output distribution amplifier is designed to be used in homes and professional settings in urban, suburban, and rural areas. Operating frequency extends to 1.2 GHz to accommodate CATV and cable broadband applications. Precision, machine-sealed, zinc die-cast housing protects against dust and water droplets and provides shielding from electrostatic discharge, with excellent surge protection on all ports. Can be used outdoors with 75-ohm F-termination caps, coaxial cables that have watertight F-connectors, and a power inserter (not included) to allow the power adapter to share the coaxial cable connected to the designated output shown on this device.

Tired of lackluster sound quality at home, in your car, or during gatherings? Meet the SUNBUCK 2000W Stereo Power Amplifier—a versatile, high-performance audio powerhouse designed to revolutionize your listening experience! With 2000W peak power (400W rated), Bluetooth 5.0 connectivity, and pro-level karaoke features, this amplifier delivers crystal-clear, immersive sound for music, movies, and parties. Whether you’re hosting a karaoke night, streaming wirelessly, or enhancing your home theater, the SUNBUCK amplifier combines raw power with sleek functionality to meet all your audio needs

Every amplifier adds noise to the signal it amplifies, and in over-the-air TV that noise can be the difference between watching a weak, distant channel and losing it. Noise figure measures exactly that, and it is one of the most important specifications in a preamplifier. The Televes Preamp 3 delivers an ultra low noise figure across the entire TV band — Low VHF, High VHF, and UHF, at 0.9 dB and reaching as low as 0.5 dB on UHF — making it the lowest-noise TV preamplifier available with automatic gain control and built-in filtering. That last part matters. Achieving a relatively low noise figure is relatively easy in a basic, fixed-gain amplifier with no protection. Doing it while keeping steep FM, LTE, and 5G filtering and intelligent automatic gain control is not, because those features normally tax the noise performance. Using state-of-the-art low-noise components and RF design, Televes engineered the Preamp 3 to deliver both, so you get the cleanest possible signal without giving up the features that protect it. At its core is Televes' proprietary TForce automatic gain control, which continuously adapts to changing conditions. When signals are strong, gain adjusts down to avoid overload. When signals are weak, gain increases to compensate. The result is a consistently clean, balanced output at all times, without any manual adjustment. The integrated FM, LTE, and 5G filters ensure only the TV signals you want are amplified, blocking the most common interference and overload sources before they can degrade your picture. Housed in an all-new rugged outdoor enclosure with a high-screening metal chassis, the Preamp 3 mounts directly to your antenna mast and is powered over the same coaxial cable through the included UL-listed power supply, which provides two outputs for distributing the amplified signal to multiple TVs. This is the single-input version, optimized for use with one antenna covering the full TV band.If you plan to combine two or more antennas, to combine signals from multiple directions or multiple broadcast markets, the Televes SmartKom (531983) is the right solution.
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.




















































