FREE shipping to
The Pyle Pro PP999 is the perfect pre-amp for any modern turntable. Small and simple with a 2 Volt output level, it's built to last and connect all your classics into .wav files. Bring your wax to life. Forget the heads, amps, and mixers, connect this gem and learn what it's like to enjoy music in a new way. 12V DC 110V Adaptor Included.
Q: Does this preamp plug into the AUX or the unused TAPE or CD inputs on the receiver?
A: On my old Sony receiver, the turntable plays off the cd mode.
A: Yes it is Possible.
Q: Are the specs for this measurably better than the 555? Thanks in any case
A: the both unit had the same specs but the difference of the PP555 it has a quarter inch output and the 9v battery support.
Q: Will this work with a Vizio sound bar
A: If the Vizio sound bar has RCA inputs
Q: Will this boost the low end of the record player outputs?
A: Yes, it is a pre amplifier to boost record player output. I use it with an OutCast from Soundcast and it is perfect.
A: Yes you do rca plugs wire to your receiver and ground wire from amp to phono that’s it. Works great
Q: Does this preamp have a power button?
A: No, it doesn't have.

The Pyle Pro PP999 is the perfect pre-amp for any modern turntable. Small and simple with a 2 Volt output level, it's built to last and connect all your classics into .wav files. Bring your wax to life. Forget the heads, amps, and mixers, connect this gem and learn what it's like to enjoy music in a new way. 12V DC 110V Adaptor Included.

Refine the quality of your audio with this PylePro ultracompact preamp. Its extra-low-noise audio operation converts phono signals to line-level signals for improved clarity of sound. This PylePro ultracompact preamp is universally compatible to turntables and other studio equipment, and can accommodate magnetic pickups to tailor your sound production needs.

Easily add an aftermarket amplifier to your vehicle’s factory audio system with this 2-Channel Active Line Output Converter and Line Driver by AudioControl. The LC1i converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This two-channel line output converter and line driver can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.

The Pro-Ject Phono Box DC is a dedicated phono preamplifier designed to enhance your vinyl listening experience. By amplifying the delicate signals from your turntable's cartridge it ensures clear low-noise sound reproduction allowing you to fully appreciate the depth and imaging of your records.FeaturesMM and MC Cartridge CompatibilityHigh-Quality Sound ReproductionCompact and Stylish DesignVersatile CompatibilityEquipped with both Moving Magnet (MM) and Moving Coil (MC) cartridge support the Phono Box DC offers flexibility for various turntable setups. A simple push-button allows you to switch between 40dB gain for MM cartridges (47k ohm load) and 60dB gain for MC cartridges (100 ohm load) making it an excellent choice for those exploring the world of moving coil cartridges.High-Quality Sound PerformanceThe Phono Box DC's top-notch circuitry minimizes distortion and enhances RIAA equalization accuracy resulting in gorgeous analog reproduction. This attention to detail ensures that your vinyl records sound as the artist intended with impressive clarity and fidelity.Compact and Elegant DesignThe Phono Box DC boasts a compact footprint that fits seamlessly into any audio setup. Available in black or silver its sleek design complements a variety of audio equipment and aesthetics.What's in the BoxPhono Box DC MM/MC Phono PreampPower CordManualSpecificationsInput capacitance/input impedance MC 100ohms/120pFInput capacitance/input impedance MM: 47kohms/120pFGain MM/MC: 40dB/60dBOutput Voltage Typical MM/MC: 300mV at 1kHz -3 mV (MM Input) / 0.3 mV (MC Input)Max Output: 9.5V (1kHz)Noise Floor MM/MC: 94dB / 75dB (Weighted)THD MM/MC: 0.01/0.05%RIAA-Equalization Curve Accuracy: 20Hz-20kHz / max 0.5dBInput: 1 pair RCA/Phono socketsLine-Level Output: 1 pair RCA/Phono socketsOutboard Power Supply: 18V/500mA DCPower Consumption: 80mA DCDimensions (W x H x D): 4.05” x 1.41” x 4.09”Weight: 1.25 lbs.
| Pros for Pyle - PP999 - Phono Pre-Amplifier - Black | |||
|---|---|---|---|
| There were no pros for this product— | There were no pros for this product— | Sound Quality, Ease of use, Size | There were no pros for this product— |
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
I was recently given a vintage Techniques Turn Table that someone had put on an undersized belt and a damaged needle! I put the right needle and belt on it and Voila, like new. Plugged it in to my newer Pioneer 7.1 AV amp, and no joy! This little pre amp took care of that and the Turn Table sounds amazing with my old vinyl collection!
This review is from Pyle - PP999 - Phono Pre-Amplifier - Black
Posted by Eddie
Good in terms of generating sound from turntable thru receiver. Does not have lots of power however.
This review is from Pyle - PP999 - Phono Pre-Amplifier - Black
Posted by ClaytonM
Great little machine if your receiver does not have a phono input or grounding hookup. My last receiver did NOT so I had to purchase this product. It works great altho it is now collecting dust in my electronic bag of wires bcuz I was forced to buy another receiver, which was a way better receiver & as all GREAT receivers should have it had a phono input and ground wire on it. Maybe Ill sell it on Ebay?
This review is from Pyle - PP999 - Phono Pre-Amplifier - Black
Posted by Bobcat1987