QIDI - Max4 Combo Enclosed CoreXY FDM 3D Printer with Box Multi-Color, 65C Heated Chamber, 800mm/s, 390x390x340mm Build Volume - Gray
Reviews coming soon
About this product
The QIDI Max4 Combo pairs the large-format enclosed Max4 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 390 x 390 x 340 mm build volume is among the largest in its class, while the 65 degrees C actively heated chamber and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and other engineering composites with minimal warping. Closed-loop XY motors with FOC control, a linear X-axis rail, and dual independent Z lead screws keep 800mm/s moves stable across the full bed. The bundled QIDI Box dries four spools of filament at 65 degrees C while printing and switches materials automatically for multi-color models and soluble support structures. A load-cell auto-leveling system delivers zero-offset first layers, the onboard camera detects first-layer and filament failures automatically, and the 3-in-1 filtration (G3 pre-filter, H12 HEPA, activated carbon) reduces odors and particles for indoor use. Compatible with OrcaSlicer, PrusaSlicer, and Klipper/Fluidd.
Features
LARGE 390x390x340mm BUILD VOLUME
Print large single-piece models, cosplay parts, molds, and nested production batches on a 390 x 390 x 340 mm plate - about 55 percent more volume than 300mm-class printers, with a dual-sided textured PEI plate heated to 120 degrees C.
CLOSED-LOOP COREXY MOTION AT 800MM/S
Prints at up to 800mm/s with 30,000mm/s2 acceleration. Closed-loop XY stepper motors with FOC control, a linear X-axis guide rail, and dual independent Z lead screws keep the toolhead stable and precise across the full 390mm bed.
370C HOTEND AND 65C HEATED CHAMBER
The bimetal hotend reaches 370 degrees C and the actively heated chamber reaches 65 degrees C, so ABS, ASA, PA, PC, PPS-CF, and carbon fiber composites print with minimal warping. Peak power draw is 1350W - use a dedicated circuit for long production runs.
ZERO-OFFSET AUTO LEVELING WITH AI CAMERA
A load cell sensor built into the hotend delivers true zero-offset first layers with no manual calibration, while the built-in camera detects first-layer and filament failures automatically. Ships fully assembled with a 5-inch color touchscreen.
QIDI BOX INCLUDED, POLAR COOLER SOLD SEPARATELY
The bundled QIDI Box holds four spools, dries filament at 65 degrees C while printing, and switches materials automatically for multi-color models and soluble support structures. Additional units can be chained for up to 16 colors and are sold separately. Note: the Polar Cooler active chamber cooling module is NOT included with this bundle and must be purchased separately.
Specifications
- NetworkingWireless, WiredPrinter Type3D PrinterLeveling CapabilityFully automatic with load cell sensor
Reviews
This product doesn't have any reviews yet.
Compare similar products
The QIDI Max4 Combo pairs the large-format enclosed Max4 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 390 x 390 x 340 mm build volume is among the largest in its class, while the 65 degrees C actively heated chamber and 370 degrees C bimetal hotend print ABS, ASA, PA, PC, PPS-CF, and other engineering composites with minimal warping. Closed-loop XY motors with FOC control, a linear X-axis rail, and dual independent Z lead screws keep 800mm/s moves stable across the full bed. The bundled QIDI Box dries four spools of filament at 65 degrees C while printing and switches materials automatically for multi-color models and soluble support structures. A load-cell auto-leveling system delivers zero-offset first layers, the onboard camera detects first-layer and filament failures automatically, and the 3-in-1 filtration (G3 pre-filter, H12 HEPA, activated carbon) reduces odors and particles for indoor use. Compatible with OrcaSlicer, PrusaSlicer, and Klipper/Fluidd.
The QIDI Q2 Combo pairs the fully enclosed Q2 CoreXY printer with the QIDI Box multi-material system for multi-color printing straight out of the box. Its 270 x 270 x 256 mm heated chamber works with a 370 degrees C bimetal hotend to print PLA, PETG, ABS, ASA, TPU, PA, PC, PPS-CF, and carbon fiber composites with minimal warping, while the bundled QIDI Box dries filament at 65 degrees C and switches materials automatically for multi-color models and soluble support structures. Load-cell auto-leveling delivers true zero-offset first layers, the 1080P AI camera detects print failures automatically, and the 3-in-1 filtration system (G3 pre-filter, H12 HEPA, activated carbon) captures 99.5 percent of airborne particles for safe indoor operation. MET certified to US and Canadian safety standards.
FLASHFORGE Creator 5 Pro is a professional enclosed IDEX 3D printer featuring four independent extruders with up to 320°C nozzle temperature and active chamber heating up to 65°C, making it ideal for high-performance filaments like ABS, ASA, PA-CF, PET-CF, and more. With a 256×256×256mm build volume, PEI-coated removable build plate, auto leveling, dynamic flow calibration, HEPA13 + activated carbon filtration, built-in HD camera, and support for Flash Studio slicing software and mobile app control, it delivers reliable multi-material and multi-color printing for both prosumers and small-batch production.
| Pros for QIDI - Max4 Combo Enclosed CoreXY FDM 3D Printer with Box Multi-Color, 65C Heated Chamber, 800mm/s, 390x390x340mm Build Volume - Gray | |||
|---|---|---|---|
| There were no pros for this product— | Overall Performance, Print Quality, Ease of Use | There were no pros for this product— | There were no pros for this product— |
| Cons for QIDI - Max4 Combo Enclosed CoreXY FDM 3D Printer with Box Multi-Color, 65C Heated Chamber, 800mm/s, 390x390x340mm Build Volume - Gray | |||
| There were no cons for this product— | Extruder Performance, AMS Performance | There were no cons for this product— | There were no cons for this product— |
Specs
Be the first to ask a question.
We’ll try to get your question answered within 24 hours by a Best Buy customer or brand representative.
Customers often buy these together
More to consider
Explore, Play, Collect Sponsored
Poolin EOC07-RedEdition 15" x 8" Huge Area Computerized Embroidery Machine with 4 Hoops, Starter Kit & Wifi for Home Business
$1,499.00The price was $1,599.00
Keep exploring
Flashforge Adventurer AD5X 3D Printer Bundle with 4 HS PLA Multicolor Filament Rolls
$459.00The price was $599.00MakerBot Sketch Sprint 3D Printer with 250 mm Per Second Print Speed
$1,299.00The price was $2,399.00Flashforge Adventurer 5M Pro High-Speed 3D Printer Bundle with 4 HS PLA Filaments
$469.00The price was $619.00
