Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange
Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - Orange
FREE shipping to
More Buying Options
Related Item
About This Item
- Key Specs
- Accessory Type: Turntable Accessory
- Model Compatibility: Audio-Technica Turntables
- General
- Brand: Audio-Technica
- Model Number: AUD ATVM95ENH
- Product Name: Audio Technica AT-VM95EN/H Headshell/Cartridge Kit
- Color: Orange
- Features
- Accessory Type: Turntable Accessory
- Quantity: 1
- Compatibility
- Model Compatibility: Audio-Technica Turntables
- Dimensions
- Product Width: 3 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 5 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Warranty
- Warranty - Parts: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Warranty - Labor: U.S. ONE-YEAR LIMITED END-USER WARRANTY
- Other
- UPC: 4961310146511
The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
- Frequency Response: 20-23,000 Hz
- Stylus Construction: Nude round shank
- Recommended Load Impedance: 47,000 ohms
- Stylus Shape: 0.3 x 0.7 mil elliptical
- Cantilever: Aluminum pipe
- Mount: Half-inch
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver
Whats Included
- Audio Technica AT-VM95EN/H Headshell/Cartridge Kit
Product Manuals
A: Yes, it will fit and the cartridge comes pre-mounted and pre-wired to to the headshell. Stylus overhang is set at 15.5mm.
A: Our Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.
Q: Will this work with a Sanusi F DR35?
A: undefined
Q: Will this fit a Dual 506 turntable?
A: It will not, not the headshell anyway. You may use the cartridge only, the AT-VM95EN, but you must use the Dual headshell and Dual cartridge mounting plate.
Q: I would assume this will fit and work perfectly with any Audio Technica Turntable ??
A: As long as it is one of our models with an S or J shaped tonearm and uses a straight detachable head shell, yes.
Q: Will this work with a Luxman vintage turntable with a Stax UA-7 Tonearm?
A: It depends. Which tonearm are you using, the shorter or longer one, and what is the effective mass of the tonearm including the headshell? How much does the headshell weigh? The compliance of the AT-VM95EN Cartridge is 12cu @ 10 Hz and the mass of the cartridge is 6.5 grams including the mounting screws. The AT-HS6 Headshell included with the AT-VM95EN/H Headshell/Cartridge combo kit weighs 9 grams. The cartridge is suitable for use with tonearms whose effective mass is anywhere from 12 to 28 grams.
Q: Will it fit on a audio technical at lp 120xbt usb
A: Yes, it will.
Q: Will it fit a audio technical at lp 120x bt usb
A: Yes, it will.
Reviews
Customer Images
The vast majority of our reviews come from verified purchases. Reviews from customers may include My Best Buy members, employees, and Tech Insider Network members (as tagged). Select reviewers may receive discounted products, promotional considerations or entries into drawings for honest, helpful reviews.
Compare similar products
The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus. Aluminum cantilever. Specially wound coils increase output voltage. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required. Compatible with any AT-VMN95 replacement stylus. Universal ½"-mount headshell for 4-pin turntable cartridges.
The AT-VM520xEB/H combo kit includes the AT-VM520xEB elliptical bonded dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM520xEB is part of the updated AT-VMx series which introduces material and design changes to further refine the VM sound offering responsive playback that is especially sensitive to the dynamism of musical expression.FeaturesAT-VMx Dual Moving Magnet CartridgeElliptical Bonded Stylus (0.3 x 0.7 mil)Paratoroidal Coils Improve Channel Separation Channel Balance and Transient ResponseCenter Shield Plate Reduces CrosstalkDurable Low-Resonance Polymer HousingAluminum CantileverCompatible with Any Turntable Headshell That Accepts 1/2” CartridgesAT-LT10 Universal ½”-Mount HeadshellFor 4-Pin Turntable Cartridges with or Without Threaded InsertsUltra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare MinimumElongated Through Holes Enable Precise Cartridge Positioning and Overhang AdjustmentOFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound QualitySlip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the RecordIncludes Mounting ScrewsWhat's in the BoxAT-VM520xEB/H VMx Headshell & Dual MM Cartridge Combo KitInstallation HardwareManualSpecificationsType: VMFrequency response: 20 to 20000 HzOutput voltage: 5.0 mV (1 kHz 5 cm/sec.)Channel separation: 24 dB (1 kHz)Output balance: 1.5 dB (1 kHz)Tracking force: 1.8 to 2.2 g (2.0 g standard)Coil impedance: 3.2 k ohms (1 kHz)DC resistance: 750 ohmsRecommended load impedance: 47 k ohmsRecommended load capacitance: 150 to 250 pFCoil inductance: 480 mH (1 kHz)Static compliance: 23 × 10-6 cm/dyneDynamic compliance: 7 × 10-6 cm/dyne (100 Hz)Stylus: Elliptical bondedStylus: curvature radius 0.3 × 0.7 milCantilever: Aluminum pipeVertical tracking angle: 20°Dimensions: 2.7” × 0.73” × 0.85”Weight: 18.3 g (0.65 oz)Replacement stylus (sold separately): AT-VMN20xEB
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. VM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylus. Aluminum cantilever. Durable low-resonance polymer housing. Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required. Compatible with any AT-VMN95 replacement stylus.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell.FeaturesElliptical Bonded Stylus on an Aluminum CantileverDual Moving Magnet DesignDurable Low-Resonance HosingHigh Output Level (4.0mV)VM95 SeriesThis VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.What's in the BoxAT-VM95E/H Headshell & MM Cartridge Combo KitInstallation HardwareSpecificationsFrequency Response: 20-22000 HzChannel Separation: 20 (dB at 1 kHz)Vertical Tracking Angle: 23°Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Bonded round shankRecommended Load Impedance: 47000 ohmsCoil Impedance: 3.3 k ohms (1 kHz)DC Resistance: 485 ohmsCoil Inductance: 550 mH (1 kHz)Output Voltage: 4.0 mV (1 kHz 5 cm/sec.)Output Channel Balance: 2.0 dB (1 kHz)Stylus Shape: 0.3 x 0.7 mil ellipticalCantilever: Aluminum pipeStatic Compliance: 17 x 10 – 6 cm / dyneDynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)Mounting: Half-inchDimensions (Cartridge & Headshell): 0.84" x 0.83" × 2.46"Model: AT-VM95E/HMounting Feature: Half-inch mountRecommended Load Capacitance: 100 to 200 pFReplacement Stylus: AT-VMN95EStylus Size: 0.3 x 0.7 milType: VM Stereo Dual MagnetWeight (Cartridge & Headshell): 15.5 g (0.55 oz)Wire Used for Coil: T.P. Copper
