Audio-Technica - Microphone - Black
- Key Specs
- Microphone Type: Condenser microphones
- Wireless: false
- General
- Brand: Audio-Technica
- Model Number: AT2020
- Product Name: Microphone
- Color: Black
- Dimensions
- Product Height: 6.5 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Length: 6.4 inches (The out of box length of the item. Length is measured as the longest dimension of the item.)
- Product Width: 2.12 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Weight: 0.75 pounds (The out of box weight of the item.)
- Audio
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 20 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Features
- Microphone Type: Condenser microphones
- Wireless: false
- Warranty
- Warranty - Parts: 1 year limited
- Warranty - Labor: 1 year limited
- Other
- UPC: 042005134953
Audio-Technica's stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020 the new standard for affordable side-address studio condensers.
Whats Included
- Audio-Technica Cardioid Condenser Microphone
- Stand clamp
- Pouch
- Owner's manual
- Audio-Technica Cardioid Condenser Microphone
- Stand clamp
- Pouch
- Owner's manual
Q: Do you think it’s good for making YouTube videos?
A: Yes it is. Be aware that you will need an interface that provides 48 volts phantom power installed between the microphone and the computer if you are considering the AT2020, which is the XLR output version of the mic, however. We also make a USB version of the mic, the AT2020USB+ which operates off USB buss power and does not require the use of an interface or phantom power.
A: no its not
A: It varies widely according to the application. We would need to know more about how you plan to use the microphone.
A: It is not, not without the use of some type of audio interface that has a lightning output anyway. Make certain that the interface also has 48 volts phantom power to power the microphone. Phantom power is provided over 3-pin XLR female type microphone input connectors. You will need an XLR male to XLR female type microphone cable to connect the microphone to the interface.
Q: Can it work on switch and ps4
A: Yes, but you will need to install a 48 volt phantom power supply (to power the microphone) between the microphone and the game console. Use a 3-pin XLR female to 3-pin XLR male microphone cable to connect the microphone to the mic input on the phantom power supply, then a 3-pin XLR female to 3.5 mm TRS cable to connect the output on the phantom power supply to the3.5 mm mic input jack on the console. Use a cable, such as the HOSA XVM-105F, to make the connection to the console. This cable is specifically designed to distribute the signal from the microphone, which is a mono signal, to both sides of the stereo 3.5 mm mic jack on the console.
A: The problem is the Neewer phantom power supply, for some reason it cannot power the AT2020 Microphone. Consider the Mackie M48 Phantom Power Supply instead.
A: You will need a USB interface that provides 48 volts phantom power installed between the microphone and the computer if you are considering the AT2020, which is the XLR output version of the mic. We also make a USB version of the mic, the AT2020USB+, which operates off USB buss power and does not require the use of an interface or phantom power. If you only need to use one microphone at a time with your computer, the USB version would be a simpler, possibly more cost effective way to go. If you need to use more than one microphone at the same time, a USB interface with multiple MIC inputs and 48 volts DC phantom power would be a better option.
Q: CAN I USE THIS FOR XBOX ONE?
A: If your XBOX has a 3.5mm MIC jack on it, you could but you would have to connect the AT2020 Microphone to an interface of some kind first. You would need an interface that has at least one XLR type Microphone input on it and the interface must supply 48 volts phantom power to power the microphone.
