Questions & Answers (11)

• Q: Can I adjust the gain on this converter? (1 answers)

  A: Yes, this converter features adjustable gain for each channel.

---

• Q: What is the maximum power handling capacity of this line output converter? (1 answers)

  A: This line output converter has a maximum power handling capability of 150 watts per channel.

---

• Q: Is this line output converter compatible with most amplifiers? (1 answers)

  A: Yes, it is compatible with most amplifiers with RCA connections.

---

• Q: Hello,where to connect the remote on wire? 1.to Amp 2.to Radio wire for remote on 3. All 3 wires together. Thank you (5 answers)

  A: This unit has an audio-sense remote output. Meaning when the radio is turned on, it senses an audio signal and sends a 12 volt signal through the remote output wire from the line output converter. That remote output wire needs to go to your external amplifier (2-channel or mono sub-amp) to signal it to turn on. The wiring is as follows: Yellow = battery +12v input Black = ground input Blue = remote +12v output to amplifier White = left front (+) input White/Black = left front (-) input Gray = right front (+) input Gray/Black = right front (-) input Black/White = reference ground (-) (reference ground optional if noise is present) Alternatively, the speaker inputs can be wired to the rear speakers depending on your application. I used the rear speakers on mine to add a subwoofer amplifier. That way I could use the fader of my factory radio to give me some limited gain control to the subwoofer. By fading to the front speakers, it will decrease the output from the subwoofer. Here is a link to the install manual: https://metra-static.s3.amazonaws.com/documents/INSTAX-MLOC725_web.pdf

---