Name: Clarion - 10" Single-Voice-Coil 4-Ohm Subwoofer - Black
Brand: Clarion
SKU: 8927773
Rating: 0 (0 reviews)

Key Specs
- RMS Power: 300 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Continuous Watts x Channel @ Ohms: true
- Maximum Watts x Channel @ Ohms: 4 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Maximum Frequency Response: 1 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 83 decibels
- Dual Voice Coils: true
- Woofer Size: 10 inches
- Mount Depth: 3.125 inches
- Woofer Composition: Polypropylene
- Woofer Surround Material: Rubber
General
- Product Name: 10" Single-Voice-Coil 4-Ohm Subwoofer
- Brand: Clarion
- Number of Subwoofers Included: 1
- Model Number: WF2520
Audio Power
- RMS Power: 300 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: true
- Continuous Watts x Channel @ Ohms: true
- Maximum Watts x Channel @ Ohms: 4 (This is the maximum load the speaker, subwoofer or amp can drive.)
- Amplifier Class: D (An amplifier's mode of operation, specifically the conditions in which its electrical current flows for the duration of an audio signal, determines its class. Each class has its strengths and weaknesses when it comes to power efficiency, levels of crossover distortion, and overall sound quality.)
Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Maximum Frequency Response: 1 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 83 decibels
- Efficiency: 83 decibels
- Signal-to-Noise Ratio (SNR): 85 decibels (The ratio of the desired signal's strength to the level of background noise. A ratio higher than 1:1, which equates to greater than 0 decibels, indicates more signal than noise.)
Features
- Dual Voice Coils: true
- MOSFET Power Supply: true (A specific type of power supply with the advantages of high switching speed and efficiency at low voltages.)
- High-Pass Crossover: Fixed (Devices with this function allow only audio frequencies above a chosen cut-off frequency to pass through to a speaker or sound system. A device may have a cut-off frequency predetermined by its manufacturer (fixed), multiple cut-off frequency options to choose from (selectable), or have the capability for the frequency to be configured by the user (variable).)
- Bass Boost: None (Circuitry that boosts the bass response of the amplifier, improving audio reproduction enhancing the sound of low frequencies. Fixed boost means the level of bass response is preset, whereas variable boost allows the user to make adjustments.)
Dimensions
- Woofer Size: 10 inches
- Cutout Diameter: 9.22 inches
- Mount Depth: 3.125 inches
- Product Height: 14 1/2 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 14 1/2 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 8 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 15 pounds (The out of box weight of the item.)
Design
- Woofer Composition: Polypropylene
- Woofer Surround Material: Rubber
Enclosure
- Enclosed: false
Other
- UPC: 729218020326

Crank the bass while you drive with this Clarion WF2520 subwoofer, which features a 10" reinforced SPP cone and 1000W maximum power handling for dynamic, reinforced lows.

Geek Squad® installation: is strongly recommended for this product. Please visit your local Best Buy store for details.
Handles up to 1000W maximum power (300W RMS): For booming bass
40Hz -1kHz frequency response: Ensures accurate sound reproduction
10" reinforced SPP cone: For extended bass response
4 ohms impedance: Conducts power evenly to keep the subwoofer at an appropriate level.