
Prevent your computer from overheating with this Corsair Hydro Series liquid CPU cooler. A micro-fin copper cold plate removes heat quickly, and the advanced fan design reduces noise for quiet operation. This Corsair Hydro Series liquid CPU cooler comes prefilled and never needs to be refilled for convenient, long-lasting cooling.
Q: do u need thermal paste for this or should it be used
A: The cold plate/ pump assembly comes with thermal paste on it. truly ready to go from manufacturer.
Q: With this fan work with my motherboard ASUS primez390-a LGA1151
A: This is a SLIGHTLY older version which appears to be compatible with LGA1156, AM2, LGA1366, AM3, LGA1155, LGA2011, FM1, FM2, LGA1150, LGA2011-3 and AM4 sockets. I had to return and reorder the SLIGHTLY newer version directly from Corsair because I made this exact mistake - note the list does not support LGA1151 sockets.
A: It will work, without issues.
A: Those Brackets are part of your AMD motherboard so no they don't come with the liquid cooler
A: Yes it works without issue other than the cooling tubes are a little on the stiff side. I installed it on a Ryzen 7 using an AORUS mother board. I used a full sized cabinet so it was somewhat easier I believe than on a mid-tower.
Q: Can another fan be used on the other side of the radiator for a push/pull configuration?
A: Yes if you can find long enough screws
Q: Will this work for an HP Omen 30L Ryzen5 gtx 1660 super?
A: It works well in the 30 L if applied correctly. I put it in my 30L Ryz7 Gtx 2060 and the temps have dropped 30c. I recommend, although you may have found out by now.
Q: Is this the new verison? (2018)
A: Hi, It is not, this one would be the 2018 version: https://www.corsair.com/us/en/Categories/Products/Liquid-Cooling/Single-Radiator-Liquid-Coolers/Hydro-Series%E2%84%A2-H60-%282018%29-120mm-Liquid-CPU-Cooler/p/CW-9060036-WW If you have any other questions, please contact us: support.corsair.com