Hartke - 200W RMS Bass Speaker Cabinet - Black
Model: 210xl
SKU: 9909868
This item is no longer available in new condition. See similar items below
- Key Specs
- Speaker Type: Bass reflex
- RMS Power: 200 watts (The maximum amount of continuous power the device is able to handle.)
- General
- Product Name: 200W RMS Bass Speaker Cabinet
- Brand: Hartke
- Model Number: 210xl
- Audio
- Speaker Type: Bass reflex
- RMS Power: 200 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 200 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 8 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 50 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 5 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 96 decibels
- Dimensions
- Product Width: 14 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 12 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 46 pounds (The out of box weight of the item.)
- Material
- Woofer Material: Aluminum
- Included
- Speaker Wire Included: false
- Warranty
- Manufacturer's Warranty - Parts: 3 years
- Manufacturer's Warranty - Labor: 3 years
- Other
- UPC: 809164001973
Packing two 10" aluminum cone drivers with 1-1/2" voice coils and a 60-oz. magnet, this bass speaker cabinet pairs with a 200W RMS bass amplifier head (not included) to deliver punchy bass tone.
- Designed for use with most 200W bass amplifier heads: For an ideal pairing.
- 200W RMS continuous power @ 8 ohms: With a 50Hz - 5kHz frequency response and 96dB sensitivity to put sonic punch behind your bass riffs.
- Two 10" aluminum cone drivers: With 1-1/2" voice coils and a 60-oz. magnet to disperse sound evenly around a room.
- Single-chamber, sealed cabinet design: With a shock-resistant metal grille, reinforced corners and a rugged covering for durability.
- 1/4" input: With a protective recessed jack plate for easily connecting a bass amplifier head.
- Recessed carry handles: Make it easy to transport the cabinet between venues.
