KICKER - CompR 12" Dual-Voice-Coil 2-Ohm Loaded Subwoofer Enclosure - Black
- Key Specs
- RMS Power: 500 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Sensitivity: 95 decibels
- Dual Voice Coils: true
- Woofer Size: 12 inches
- Woofer Composition: Injection-molded polypropylene
- Woofer Surround Material: Santoprene
- General
- Product Name: CompR 12" Dual-Voice-Coil 2-Ohm Loaded Subwoofer Enclosure
- Brand: KICKER
- Number of Subwoofers Included: 1
- Model Number: 43VCWR122
- Audio Power
- RMS Power: 500 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1000 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Integrated Amplifier: false
- Audio
- Impedance: 2 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Sensitivity: 95 decibels
- Efficiency: 95 decibels
- Features
- Dual Voice Coils: true
- Grille Included: false
- Dimensions
- Woofer Size: 12 inches
- Product Height: 16 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 18.325 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 14.4375 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 1 pounds (The out of box weight of the item.)
- Design
- Woofer Composition: Injection-molded polypropylene
- Woofer Surround Material: Santoprene
- Frame Material(s): Other
- Enclosure
- Enclosed: true
- Enclosure Type: Vented
- Box Material: Wood
- Box Covering Material: Carpet
- Other
- UPC: 713034076230
Pump up the bass with this CompR 12-inch subwoofer enclosure. This setup features Kicker's 12-inch, 2-ohm subwoofer installed in a carpeted, black MDF box. The enclosure also features a double-stacked magnet and internal bracing for secure operation. This CompR 12-inch subwoofer enclosure operates on 500W of power and can produce 1000W of peak power.
- Handles up to 1000W peak power (500W RMS): For powerful sound.
- 95dB sensitivity: Delivers powerful output.
- 11-1/4" top depth; 14-7/16" bottom depth: For the right fit.
- 12" injection-molded polypropylene woofer cone: For deep, expressive bass.
- 2 ohms impedance: Conducts power to keep speakers working at optimal levels.
- Vented enclosure: Enriches low tones for booming bass.
- Carpeted thick MDF: Offers long-lasting use.
- Santoprene®™ surround: Get a deeper bass that stays pumping, no matter what the volume.
Whats Included
- CompR 12" Dual-Voice-Coil 2-Ohm Loaded Subwoofer Enclosure
Q: What is the best amp for this? (43VCWR122)
A: Kicker CXA6001. This is the 600W 2 ohm mono amp. Perfect match.
Q: What brand and wattage amplifier would you recommend to run this?
A: We bought the 400 watt kicker amp here as well and it’s perfect
Q: Why does this set up say 2ohm? If you remove the sub its 4ohm stamped.
A: Dual voicecoil, 4-ohm subs equal out to 2-ohm, when run in parallel. Which is the way mine was wired from the factory when I got it.
Q: So would a 8 ohm, 12000 watt amp work for this speaker ??
A: Usually car speakers and subwoofers are 4 ohm and less. This being a 2 ohm you would need to wire 4 of these subwoofers in series to get 8 ohms.
A: Yes it would. Maybe a wee bit too much. If you get it make sure you keep the gain about half ways to three quarters. I have these hooked up to a 3000 watt 1100rms DS18 XL candy, but i keep the gain down to about half way and it hits hard and clean. Hope that helps
Q: does this come with a protective grille ?
A: No, but i found one online for a great price!
A: Yes it will. Might be bit much power. But if you properly set your gains, you'll be good to go.
A: Around the speaker are black cover...from the top u will see the word kicker...the next flat ridge space is where the bolt are at...under the flat sticky cover....use a sharp edge tool to left a corner up and pull off slowly....
