Pioneer - 10" Single-Voice-Coil 4-Ohm Subwoofer - Black
- Key Specs
- RMS Power: 250 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1100 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.16 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 92 decibels
- Woofer Size: 10 inches
- Mount Depth: 4.8 inches
- General
- Product Name: 10" Single-Voice-Coil 4-Ohm Subwoofer
- Brand: Pioneer
- Model Number: TSW106M
- Audio Power
- RMS Power: 250 watts (The maximum amount of continuous power the device is able to handle.)
- Peak Power Handling: 1100 watts (The maximum amount of power an electronic device, like a speaker, can handle without damage. This refers to short bursts of power, while root mean square (RMS) power handling indicates the amount of continuous power a device can sustain. Higher levels of distortion can also occur at peak power levels when the device is powered beyond its recommended usage.)
- Audio
- Impedance: 4 ohms (Describes the resistance of an electric signal throughout the system. Devices with low impedance require less power to deliver optimal signals but are more at risk for damage from overloading. Higher impedance requires more power but is more protected from overload damage.)
- Minimum Frequency Response: 20 hertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The minimum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Maximum Frequency Response: 0.16 kilohertz (Describes the maximum range of frequencies or musical tones a product can reproduce, from very low tones to very high treble tones. The maximum frequency or musical tone the speaker can reproduce. High treble tones have higher frequencies while low tones and deep bass have lower frequencies.)
- Sensitivity: 92 decibels
- Features
- Grille Included: false
- Dimensions
- Woofer Size: 10 inches
- Cutout Diameter: 9.1 inches
- Mount Depth: 4.8 inches
- Product Height: 6.1 inches (The out of box height of the item. Height is measured as the vertical distance from the bottom of the item to the top as it would be primarily used or placed.)
- Product Width: 11.2 inches (The out of box width of the item. Width is measured as the horizontal distance from one side of the item to the other as it would be primarily used or placed.)
- Product Depth: 11.4 inches (The out of box depth of the item. Depth is measured as the distance from the front of the item to the back as it would be primarily used or placed.)
- Product Weight: 6.45 pounds (The out of box weight of the item.)
- Enclosure
- Enclosed: false
- Other
- UPC: 884938335508
Enjoy rich bass when you install this 10-inch Pioneer subwoofer. Large binding posts make it easy to use heavy gauge wire, and a vented pole yoke dissipates heat to improve power performance. This Pioneer subwoofer has a 20 to 160Hz frequency response to provide clear sound for voice and musical playback.
Geek Squad® Installation Recommended
Visit your local Best Buy store for more information.
- Handles up to 1100W peak power (250W RMS): For rich sound.
- 20-160Hz frequency response: For accurate sound reproduction.
- 92dB sensitivity: Picks up the highs and lows for faithful sound reproduction.
- 9.1" mounting diameter; 4.8" mounting depth: For a proper fit.
- 10" passive subwoofer: Delivers powerful bass.
- 4-ohm impedance: Conducts power evenly to keep the speaker at an appropriate level.
Whats Included
- Pioneer 10" Single-Voice-Coil 4-Ohm Subwoofer
A: undefined
Q: What is the depth of this sub?
A: Its depth is 3.3 inches.
Q: Can you put two of these together on a 1100 watt amp?
A: Yes you can, it will spilt the wattage between the two my are running 800 watts each through a 1600 watts amp
A: No. Its only semi shallow because it has a very small driver that sounds terrible
Q: Does this come with installation?
A: Sorry but I usually don’t review. Mine didn’t but I didn’t care because I installed it myself. They offered installation but it’s not free unless you send 199.00 or more. You’ll still have to pay for extra parts.
A: I paired these speakers with the Kicker CXA6001 amp. The amp has the perfect power for the speakers and hit quite nicely. As for the ported box, I am using the Metra 12" dual ported box. The box comically barely fits in the back of my vehicle and let's the speakers hit like champs.
