Questions & Answers

Q: QuestionOur cabinet held a GE microwave that has been discontinued. We recently purchased the GE 2-cu ft 1200-Watt Countertop Microwave Model #JES2051SNSS. The dimensions of our cabinet are L: 25.5 H: 16 7/8 D:22 3/4 . What trim kits can we purchase?

Asked 4 years ago by ChampaBay.

• A:Answer You have the wrong microwave model for a trim kit. You bought a countertop microwave. I made the same mistake, so return the countertop unit (Best Buy did that for me as it was their mistake)t and buy the GE builtin unit. Mine was a GE Monogram. You can order a trim kit for that. Two sizes 27" or 30". there is also a 1.1 CF Monogram that has it's own trim kit (separate price). It fits in a thinner upper cabinet. Be sure to verify the depth of your existing cabinet. I actually have both units installed in my home, though the 1.1 CF Microwave has not arrived yet (it has be a couple months back ordered) . I did get the trim kit for it right away.

  Answered 4 years ago by hagaboomVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI’m looking for a microwave and trim kit to fit an opening 25” wide x 19” high. Thanks

Asked 4 years ago by 0812.

• A:Answer Hello. We appreciate your interest in one of our GE microwaves! If you were wanting a built-in appearance for your microwave by using a trim kit, we unfortunately would not have one that would fit a width of 25"; our trim kits can be used with openings of 27" or 30". We regret any inconvenience this may cause and will send notice of your interest in a built-in unit with these dimensions to our design team. We do have various countertop models that are under 25" wide if that may be a good alternative for you. If you need any further information, you are always welcome to reach out to us here or over social media - we are glad to assist. All the best! -Sarah@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with PEM31SFSS

Asked 4 years ago by Robby.

• A:Answer Hi - Yes, this is the appropriate built-in kit for the GE Profile PEM31SFSS model microwave. We do hope you choose GE for your home! Vikki@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the overall dimensions of this trim kit?? Height and width please… my cut out is 17x24 .. I have a monogram zem115sjss

Asked 4 years ago by Vinh.

• A:Answer Hi. Thank you for asking your question. The front trim piece has the following dimensions. The height is 16 1/2" x Width of 26 7/8 inches. Hope this helps. Geoff@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am purchasing the GE Profile microwave model PEM31SFSS will trim kit JX827SFSS fit this microwave?

Asked 4 years ago by Kathy.

• A:Answer Hi there, and thanks for reaching out to us. We're glad to advise this model is indeed compatible with trim kit JX827SFSS. JX830SFSS is also an option, if you needed a built-in option of 30". We are confident this microwave will be an excellent addition to your kitchen. We're happy to help with any other concerns or questions, and wish you all the best! -Sarah@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI bought the monogram zem115sjss microwave..this trim kit will fit but what the width and height for the trim kit? Will it fit into my cut out??

Asked 4 years ago by Vinh.

• A:Answer Hey there, and thanks for taking the time to reach out to us! We know how important the correct trim kit is for your microwave, and are glad to assist. JX827SFSS would indeed be the appropriate trim kit for this model, and has dimensions of 16 1/2" H x 26 7/8" W. We hope this would be a good fit for you, and are available if you have any other questions or concerns. All the best! -Sarah@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace a GE model JEM31 microwave and trim kit. Is GE model PEM31DFBB a suitable replacement? My cabinet opening is 24 7/8” W, 15” H, 12 1/2” D. I will need a black trim kit also. What model no?

Asked 4 years ago by UptownGirl.

• A:Answer Thanks so much for choosing GEA! We are happy to find an excellent replacement for your microwave. Without the complete model number to your current unit, we cannot do a direct comparison. However, using the dimensions you provided for your cutout, you may have an issue with the depth. Both the width and height are perfect, but model PEM31DFBB requires at least 16" in depth. For trim kits, the 27" version is JX827DFBB and the 30" version is JX830DFBB. Hope this helps! - John@GEAppliances

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questiondo you have GE trim kits in stock, I need a JX7227DLWW, (it is a 27" kit)

Asked 4 years ago by kene8.

Q: QuestionWHICH TRIM KIT DO I GET FOR MICROWAVE PEB7227DLBB

Asked 4 years ago by AMBERE.

• A:Answer Hello - Thanks for your interest; we are happy to help! The microwave model PEB7227DLBB has two trim kits depending on the width of your cabinet. The 27" trim kit is JX7227DLBB; the 30" trim kit is JX7230DLBB. We hope this helps. Thanks for checking. Olga@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have GE model PEM31SFSS. Opening is 28 1/2” wide and 15 3/4” tall w/ a 3/4 edge before hitting surrounding cabinets. What trim kit do I need to buy? Picture attached. Thanks!

Asked 4 years ago by Jen.

• A:Answer Hello, thank you for your question. This microwave is compatible with either this 27" trim kit, part number JX827SFSS, or this 30" trim kit, part number JX830SFSS. For more information about their installation, we recommend you check out their installation instructions on their product page on our website. We hope this helps! -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes a PES7227DL/SL/EL/BL/FM fit in a GE 27' trim kit?

Asked 4 years ago by Yo.

• A:Answer Hello, thank you for your question. This microwave and its color variations are not compatible with either a 27" or 30" trim kit. We apologize for any inconveniences this may cause. If you would like a microwave with the same dimensions and capacity that can be used with both a 27" and 30" trim kit of a variety of colors, we recommend you check out our PEB7227ANDD model microwave. We hope this helps! Please feel free to reach out with any questions and concerns you may have. -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am looking for a stainless steel microwave that is compatible with this trim kit. I looked on-line and saw black, gray & white but did not see stainless steel, Can you please provide the p/n#? Thanks.

Asked 4 years ago by Capecoduser.

• A:Answer Hello, thank you for your question. We apologize that you have not been able to find information regarding the microwaves that are available for this trim kit and understand your frustration. The stainless steel microwave that will work with this trim kit is PEM31SFSS. We hope this helps! -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the JKS300SNSS trim kit compatible with the GE 2.2 profile PES7227SLSS?

Asked 4 years ago by Jackie.

• A:Answer Hello, thank you for your question. There is not a trim kit that is compatible with the PES7227SLSS microwave. We sincerely apologize for any inconveniences this may cause. Please feel free to reach out with any further questions or concerns as we are always here to help. -Chris@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace a GE Monogram microwave model ZEM200SY 002. It has a trim kit and the cabinet opening is 25" wide by 15" high. What do I use?

Asked 4 years ago by Plywood.

• A:Answer Hello and thank you for being part of the GEA family for all these years. We're happy to find you a replacement for your microwave. You may want to check out model PEM31SFSS. It has the same cutout requirements as your current model. It can be installed with the 27" JX827SFSS trim kit or the 30" JX830SFSS version. Let us know if you have any questions. - John@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have the trim kit from original build-out jx2127/2130 and have purchased a new peb7227. Do I need to purchase another trim kit and if yes, which one is perfect?

Asked 4 years ago by bubbamodern.

This question was asked about the related product: 27" Built-In Trim Kit for Select GE Microwaves - White

• A:Answer Hi there - Great question! The correct 27" trim kit for your model is JX7227DLWW. Thanks so much for checking! -Mikayla@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this trim kit work with a GE PVM917SKSS Microwave? If not, which kit does?

Asked 4 years ago by VTGAL.

• A:Answer Hi there - Great question! Model PVM917SKSS is an over-the-range microwave and is not approved to be installed as a built-in. There is not a trim kit available for this microwave. Feel free to reach out to us on social media if you have any other questions. Thanks so much for checking! -Mikayla@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace my G.E. Monogram built-in microwave that is 24"x13" and i see the ZEB1227SLSS is the same size, i need the trim kit can you tell me which kit to buy with this.

Asked 4 years ago by Anonymous.

• A:Answer Hi there, Thank you so much for your interest in this fabulous microwave! We're happy to help you. The trim kit for this microwave is ZX2127SLSS (27")/ZX2130SLSS (30"). We hope this helps! Mike@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe are doing a kitchen remodel and are thinking about the GE PEM31SFSS microwave. Where can I find out if this trim kit is compatible? Thank you

Asked 4 years ago by Chris.

• A:Answer Hey there, Thanks for reaching out. We'd be happy to help you find the proper trim kit! The trim kit that is compatible with this model microwave is JX827SFSS (27") JX830SFSS (30"). Keep in touch with us! Mike@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe need to replace our microwave, model # JE1860GB 002. It is a built in microwave with 27" trim. Which is the best replacement option in stainless steel with SS trim? Need similar dimensions to fit in.

Asked 4 years ago by Arts.

• A:Answer Hi there - thanks for reaching out! Please keep in mind that trim kits are model-specific, so your existing trim kit will not fit a new model. The best replacement for your current microwave that we see in terms of size, capacity, and watts is model #PES7227SLSS, which can be found here: https://www.bestbuy.com/site/ge-profile-2-2-cu-ft-microwave-stainless-steel/6111521.p?skuId=6111521. The corresponding trim kit for this microwave is #JX7227SLSS. We hope this helps! Be well, Kelsey@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question