A:AnswerThank you for your inquiry. The SMT1500 is rated for 1000 watts and the T652 printer has an average power consumption of 725 watts when printing. The Smart-UPS could support the load for a few minutes while printing. Unless it is mission critical to be able to print during a power outage, we typically recommend connecting printers to surge protectors only.
A:AnswerThank you for inquiry. No this unit will not work with your freezer. This unit only supports 1,000 watts of power connected to it. You would need an UPS that supports at least 1,560 watts to support your freezer.
A:AnswerI have always monitored using a connected computer/server but I believe remote monitoring is possible if you add a network card to the unit: http://www.apc.com/shop/us/en/products/UPS-Network-Management-Card-2/P-AP9630
A:AnswerThat's not possible with this unit. You will have to go much much bigger to get 6 hours run time.
This unit with nothing attached will only run for around 4 hours.
A:AnswerThank you for your inquiry. The amount of runtime you will get on this UPS depends on the power consumption of all these connected devices added together. Below is a link to the runtime chart for this SMT1500. For example, on a 500W connected load you will get about 23 minutes of runtime.
http://www.apc.com/products/runtimegraph/runtime_graph.cfm?base_sku=SMT1500&chartSize=large
