Questions & Answers

Q: QuestionWill this work with a Sanusi F DR35?

Asked 1 year ago by Anonymous.

Q: QuestionWill this fit a Dual 506 turntable?

Asked 1 year ago by BJ.

• A:Answer It will not, not the headshell anyway. You may use the cartridge only, the AT-VM95EN, but you must use the Dual headshell and Dual cartridge mounting plate.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionJust purchased to replace the stock head shell and cartridge on my lp120 do they come pre aligned to my turntable specs??

Asked 1 year ago by Akscaram88.

• A:Answer Our Headshell/Cartridge Combo Kits come with the stylus overhang distance set at 15.5mm, the AT-LP120-USB Turntable calls for a stylus overhang distance of 16mm. We recommend stylus overhang be within 1mm of that specified by the turntable manufacturer, so the AT-VM95EN/H is good to go out of the package with this turntable.

  Answered 1 year ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI would assume this will fit and work perfectly with any Audio Technica Turntable ??

Asked 3 years ago by 1RUBBERMAN.

• A:Answer As long as it is one of our models with an S or J shaped tonearm and uses a straight detachable head shell, yes.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a Luxman vintage turntable with a Stax UA-7 Tonearm?

Asked 3 years ago by Anonymous.

• A:Answer It depends. Which tonearm are you using, the shorter or longer one, and what is the effective mass of the tonearm including the headshell? How much does the headshell weigh? The compliance of the AT-VM95EN Cartridge is 12cu @ 10 Hz and the mass of the cartridge is 6.5 grams including the mounting screws. The AT-HS6 Headshell included with the AT-VM95EN/H Headshell/Cartridge combo kit weighs 9 grams. The cartridge is suitable for use with tonearms whose effective mass is anywhere from 12 to 28 grams.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it fit on a audio technical at lp 120xbt usb

Asked 3 years ago by Rob.

• A:Answer Yes, it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it fit a audio technical at lp 120x bt usb

Asked 3 years ago by Rob.

• A:Answer Yes, it will.

  Answered 3 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit an old Yamaha P350? Will other AT cartridges offered at Best Buy also fit (which ones)? Thanks.

Asked 4 years ago by Justme.

• A:Answer You must use the Yamaha angled headshell which was supplied with your turntable. If you have the headshell, our AT-VM95EN Cartridge will work on it.

  Answered 4 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on my Technics SL-1200M3D

Asked 4 years ago by LAW.

• A:Answer Yes it will.

  Answered 4 years ago by AudioTechnica

  
  Helpful (0)Unhelpful (0)ReportAnswer this question