Everything for Back to School — and then someShop now

Main Content

Questions & Answers

Page Showing 21-40 of 138 questions
  • QuestionIs the trim kit included

    Asked by Theresa.

    • Answer Hi Theresa! Thank you for your question. No, the trim kit is not included with the Frigidaire GMBS3068BF. If your installation requires a trim kit, it must be purchased separately. Please refer to the installation guide or the compatible accessories list to select the correct trim kit for your installation. — Reed

      Answered by FrigidaireSupport

  • QuestionWhat trim kit will need for its installation?

    Asked by Elvis119.

    • Answer Hi Elvis119! Thank you for your question. For the Frigidaire Gallery Built-In Microwave model GMBS3068BF, the compatible trim kit depends on the size of your cabinet opening. The GMTK3068AF is designed for 30-inch openings, while the GMTK2768AF is intended for 27-inch openings. The trim kit is sold separately and is required for a proper built-in installation and finished appearance. — Reed

      Answered by FrigidaireSupport

  • Questionwhat warranty does it come with

    Asked by comp.

    • Answer Hi there, Comp! According to the Frigidaire manual, this microwave comes with a 1-year limited warranty. The warranty covers parts and labor for one year from the original date of purchase for defects in materials or workmanship, provided the appliance is installed, used, and maintained according to the instructions. Certain exclusions apply, such as cosmetic damage, commercial use, and products purchased "as-is." - Maico

      Answered by FrigidaireSupport

  • QuestionWe are looking at GMBS3068BF. Our opening is 27" wide, 17" high, and 20 3/4" deep. Is this compatible with that model microwave? Also, do we need an exhaust system to the outside or are the opening with the trim kit adequate for exhaust?

    Asked by goldfinch.

    • Answer Hi goldfinch, thank you for reaching out. No, an opening measuring 27" W × 17" H × 20 3/4" D is not compatible with the GMBS3068BF built-in microwave and its required trim kit, as a larger cabinet opening is needed for proper installation. Additionally, no external exhaust vent is required. The microwave is designed to vent through the openings provided by the compatible trim kit, so no outside ducting is necessary. — Reed

      Answered by FrigidaireSupport

  • QuestionReplacing a DC'd Electrolux El24MO45IBA dimensions 24"W x 20 1/6"D x13 3/8" H & 27" trim kit Under counter cabinet opening is 20 1/4" D x 25" W x 16 1/4" H (w/o riser) 14 1/4" Height (w/ riser) Will this model work for us?

    Asked by StevenM.

    • Answer Hi StevenM, thank you for your question. The Frigidaire GMBS3068BF is generally compatible with a 24" built-in replacement like your current Electrolux unit, and your cabinet opening dimensions fall within the typical range needed for installation. However, the final fit depends heavily on using the correct Frigidaire 24" trim kit, as it determines the proper flush appearance, height alignment, and ventilation clearance. While the microwave itself should fit, you’ll need to confirm trim kit compatibility to ensure it properly matches your existing 27" trim and cabinet setup. — Reed

      Answered by FrigidaireSupport

  • QuestionDoes Frigidaire microwave come with the frame alrady?

    Asked by Sandra.

    • Answer Hi Sandra, thank you for your question. The Frigidaire Gallery GMBS3068BF microwave does not include the built-in trim frame/trim kit with the unit. The required trim kit for installation must be purchased separately, with compatible options including the 30" trim kit (GMTK3068AF) or the 27" trim kit (GMTK2768AF), depending on your cabinet opening size. — Reed

      Answered by FrigidaireSupport

  • QuestionCan the safety lock be disconnected

    Asked by Modern.

    • Answer Hi there, thank you for your question. The safety or child lock on the Frigidaire GMBS3068BF cannot be disconnected or removed, as it is built into the unit for safety compliance. However, it can be turned off or deactivated using the control panel button sequence when needed, since it is a software-controlled feature rather than a physical component. — Reed

      Answered by FrigidaireSupport

  • QuestionWhich measurement system uses 9ths of an inch? 24 4/9??

    Asked by Anonymous.

    • Answer Hello there, valued consumer! The Frigidaire manual uses standard U.S. measurements, which are normally written in fractions like 1/8", 1/4", or 1/16" — not ninths. So “24 4/9” inches is likely a typo, formatting issue, or conversion error in the product listing rather than an intentional measurement system. For the Frigidaire Gallery 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking, dimensions in the official manual are typically given in decimals (for example, 24.44") or common fractions, not ninths of an inch. - Maico

      Answered by FrigidaireSupport

  • QuestionDoes it come with trim kit?

    Asked by Lu.

    • Answer Hi Lu! Thank you for your question. For the Frigidaire GMBS3068BF, the unit does not come with a trim kit. It is sold separately and required for built-in installation to achieve the finished built-in look. Frigidaire specifies compatible trim kits such as the GMTK3068AF (30") or GMTK2768AF (27"), depending on your cabinet opening. — Reed

      Answered by FrigidaireSupport

  • QuestionI am planning on installing this in a 24 inch lower cabinet. Will it fit?

    Asked by Anonymous.

    • Answer Hi valued consumer, you cannot just drop this built‑in microwave into a 24″ lower cabinet opening and expect it to fit flush. The unit is slightly wider than 24″, and the installation requires a larger cut‑out (about 24¾″ wide and taller than the unit) to properly install and ventilate. Actual unit dimensions (from official specs): - Width: ~24 ⅜″ (about 24.44 in) - Height: ~13 ⅝″ (about 13.63 in) - Depth: ~19 ⅝″ (about 19.62 in) These are the outside dimensions of the microwave itself. - Maico

      Answered by FrigidaireSupport

  • QuestionHow do you mount this over the oven

    Asked by Anonymous.

    • Answer Good day, valued consumer! According to the official Frigidaire documentation and installation guidance for this model, you do NOT mount this microwave directly “over the oven” like an over-the-range unit. It installs differently. - This is a built-in microwave, not an over-the-range microwave. - It must be installed: - Inside a cabinet or wall opening, or - Above a wall oven only if built into cabinetry with a trim kit To place it over a wall oven, you need: 1. A cabinet/wall cutout 2. A trim kit (REQUIRED) 3. Clearance above the oven To mount it “over the oven,” you: - Build or use a cabinet opening above the oven - Install a compatible trim kit - Slide the microwave into the opening and secure it via the trim kit - Maico

      Answered by FrigidaireSupport

  • QuestionIs the trim included

    Asked by Ed.

    • Answer NO

      Answered by IFOUNDADIAMOND

  • QuestionI need to replace my GE Profile built-in microwave. Does one come 18 3/4" high and 29 3/4" long?

    Asked by dolly4.

    • Answer Hello there, Dolly4! No, according to the official specifications/manual for the Frigidaire Gallery 2.2 Cu. Ft. Built‑In Microwave with Sensor Cooking, it does not come in a size of 18 3/4″ high × 29 3/4″ wide. Actual Dimensions (per Frigidaire spec) - Height: ≈ 13 5/8 inches (≈ 13.63″) - Width: ≈ 24 4/9 inches (≈ 24.44″) - Depth: ≈ 19 5/8 inches (≈ 19.63″) Installation Cut-Out (Typical) - Cut-Out Height: ~16″ - Cut-Out Width: ~24 3/4″ So this microwave is designed for a standard 24–25″ wide built-in opening, not a larger ~30″ width. This means it will not directly replace a unit that’s 29 3/4″ wide and 18 3/4″ high without modification (trim kit or custom cabinetry). If you measured your existing GE Profile microwave as 18 3/4″ high × ~29 3/4″ wide, you’ll need either: - A different model that matches those larger dimensions, or - A trim kit and possibly cabinet adjustments to fit this 24″ class microwave.- Maico

      Answered by FrigidaireSupport

  • QuestionDoes this microwave come with the trim kit?

    Asked by Ruben.

    • Answer No you have to buy that separately.

      Answered by Anonymous

  • QuestionDoes best buy offer installation?

    Asked by Q.

    • Answer N0

      Answered by IFOUNDADIAMOND

  • QuestionDoes this microwave have a changeable filter?

    Asked by Burntpopcorn.

    • Answer Hi there, our valued customer! the Frigidaire Gallery 2.2 Cu. Ft. Built-In Microwave (GMBS3068BF): it does not feature a traditional, replaceable charcoal or grease filter designed for over-the-range venting. -Chris

      Answered by FrigidaireSupport

  • QuestionNeed to replace FGMO226NUFA. Will our existing 27in trim kit work with this model or do we need a new one?

    Asked by Microwave.

    • Answer Mine worked with the new microwave.

      Answered by Anonymous

  • QuestionWhat are the outside detentions of the box that the microwave is in for pickup?

    Asked by Anonymous.

    • Answer Hi there, our valued customer! Kindly add 3-5 inches to each side of the product dimensions for the packaging. -Chris

      Answered by FrigidaireSupport

  • Questiondoes it comes with a trim for built in. I currently have a GE profile. Is the trim standard for all GE microwave.

    Asked by Anonymous.

    • Answer Hi there! Thank you for reaching out. The GMBS3068BF built-in microwave does not include a trim kit — it is sold separately. Frigidaire trim kits are specifically designed for our models and are not compatible with GE or other brands. For this microwave, the recommended trim kit is GMTK3068AF and GMTK2768AF. - Reed

      Answered by FrigidaireSupport

  • QuestionOur cutout width is 25.75" and the maximum width for this microwave is 25" .. I am trying to figure out why that won't work if the trim kit will cover it? Can I make our opening width of 25.75" work?

    Asked by Emma.

    • Answer Hi Emma! Thank you for reaching out. For the Frigidaire GMBS3068BF microwave, even with a trim kit, the maximum cutout width is 25", so your opening of 25.75" is too wide. While a trim kit can cover gaps cosmetically, it cannot provide the structural support or secure mounting needed for the microwave, and attempting to install it in an oversized space could make the unit unstable, misaligned, or unsafe, and may void the warranty. The only safe options are to reduce the opening to 25" or less or select a model designed for a wider space. - Reed

      Answered by FrigidaireSupport