A:AnswerI tried everything I could find online to help me with this problem. Then I tried one more time by pushing only the word “reset”. I did not push the red light. It worked!
A:AnswerI just replaced my JVM3160RF3SS with what I thought was a JMV3160RFSS (notice the 3 is missing from 3SS) from Best Buy. But the model number on the actual unit is JVM3160RF6SS. So, I bought what I thought was JMV3160RFSS because I couldn't find the JMV3160RF3SS anywhere.
I can tell you that with the JVM3160RF6SS the screw holes on top of the microwave don't exactly line up with the JMV3160RF3SS. I purchased what I thought was the same model I had before specifically so everything would line up and it would be an easy install. Not so fast my friend! The holes were slightly off, super frustrating.
A:AnswerHi-this is Sue from GE. Thanks for your interest! The blower will need to be rotated for indoor (recirculating) venting. The directions are provided in the installation instructions included with the microwave. Also, the recirculating charcoal filter is included. The turntable can be turned off when using larger dishes. Model JNM3161DFBB is the same microwave except assembled for indoor (recirculating) venting. Thanks for checking with us!
A:AnswerHi AGST- This is Sue at GE Appliances. Thanks for your purchase! The cardboard cover on the right top or side wall of the microwave interior is there by design. The cardboard (mica) covers the waveguide system that feeds microwave energy into the cavity and should not be removed. The microwave should not be used for any function if this cardboard cover is not in place. If removed, it would require service to replace. Thanks for checking with us!
A:AnswerYes, you can either vent back into the room or through an external vent. I vented internally. The configuration was easy, hardest part was installing the filter. It took a bit of finesse to remove the panel from the front of the unit.
A:AnswerHi -this is Sue from GE. Thanks for your interest in our GE model JVM3160RFSS. We appreciate your loyalty!
Our 30" over-the-range microwaves are designed to be installed in the same standard upper cabinet space (30" min. width, 12" min.-13" max. depth). The height and depth of the models may vary slightly. The top mounting is basically the same. You will need to use the back wall mounting bracket included with the new model as they are similar but not interchangeable.
Your model, JNM1851SM2SS was shipped assembled for recirculating (indoor) venting. Model JVM3160RFSS is shipped assembled for outdoor venting. If you choose model JVM3160, you will also need to purchase the optional recirculating charcoal filter JX81L and follow the recirculating venting instructions in the installation guide.
You may want to consider model JNM3161RFSS. It is the same model except is shipped assembled for recirculating (indoor) venting. You can view online at:
http://www.bestbuy.com/site/searchpage.jsp?_dyncharset=UTF-8&_dynSessConf=&id=pcat17071&type=page&sc=Global&cp=1&nrp=15&sp=&qp=&list=n&iht=y&usc=All+Categories&ks=960&fs=saas&saas=saas&keys=keys&st=+JNM3161RFSS
Thanks for checking with us. Enjoy!
A:AnswerThe quick answer is that yes, it will fit in the same space. The longer answer is that you're going to have to do some work. I just (10/20/2023) installed a JVM3160DFWW in place of a JVM3160DF2WW that I installed in 2015. I use the outside back exhaust installation method. I was hoping I could use the same wall bracket that came with the DF2WW and top cabinet screw holes that I drilled in 2015 but no. There's only two bracket slots on the lower back of the DFWW instead of the four on the DF2WW and they're in a slightly different position. You have to use the new bracket which means drilling more holes. Instead of three top mounting nuts there are only two on the DFWW. One of the two is almost in the same position as one on the DF2WW but the other isn't close and you'll have to drill another hole in the upper cabinet. I was a little frustrated because I thought I could just remove the DF2WW and drop in the DFWW but that's not the case.
A:AnswerHi - We certainly appreciate your loyalty! Comparable models are GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFBB and GE® 1.7 Cu. Ft. Over-the-Range Microwave Oven JVM6172DKBB. These models can be converted for recirculating venting. The Recirculating Charcoal Filter for recirculating venting is included. We also offer GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven with Recirculating Venting
JNM7196DKBB. This models is factory assembled for recirculating so no conversion is required. It also have sensor cooking controls (Automatically adjusts time and power for delicious cooking results) and easy clean, dark gray enamel interior with Steam Clean option. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Keep in touch! Sue
A:AnswerThe JVM3160 model is not a good replacement for the JVM1430 spacemaker microwave. The location of the top bolts is in a different place than the pacemaker (which for us meant that it ran into brackets into our cabinets and was not useable) it is also quite a bit deeper than the spacemaker and will stick out further. Trying to find a good replacement option, it looks like GE doesn't have anything that will work.
A:AnswerHi - We offer comparable models: GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFWW and GE® 1.7 Cu. Ft. Over-the-Range Microwave Oven JVM6172DKWW. Compare: https://products.geappliances.com/appliance/gea-compare/&sku=JVM6172DKWW&sku=JVM3160DFWW - All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. We certainly appreciate your loyalty! Sue
A:AnswerHi CMT - The overall height is the same on all GE models (16 1/2"H). All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. A comparable model is GE® 1.7 Cu. Ft. Over-the-Range Microwave Oven
JVM6172SKSS. Take a look at the Quick Specs at the following link for product and cabinet dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM6172SK_C3.pdf - We certainly appreciate your loyalty! Keep in touch at GEAppliances.com - Sue
A:AnswerHello Nick - this is Nancy at GE and I am happy to help you. Yes, the JVM3160DFWW would be a great replacement for a current GE over-the-range microwave that you have. You would need to adjust the blower motor to be internally vented and purchase a charcoal filter. The Installation Instructions explain how to adjust the unit for internal venting. You would also need to use the mounting bracket and hardware that comes with the new microwave as they have changed over the years. I hope this helps! Thanks for checking with us!
A:AnswerHi RickG- We certainly appreciate your loyalty! It should fit. Model JVM1440WH01 is approximately 29 7/8" wide x 16 13/32" high x 15 1/4" deep. GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFWW is approximately 29 7/8" wide x 16 1/2" high x 15 1/4" deep. Check out the Quick Specs for details: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=340168_jvm3160df_c3.pdf - All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Thanks for choosing GE. Enjoy! Sue
A:AnswerHey Bob, if you are replacing with the same brand, it should be easy. It does take two people, though, and you need to be certain that the holes line up in the cabinet above it. If you have a fan, it comes configured for it. If no fan, you have to change it on the new model. Each manufacturer has its own wall bracket, so GE to GE shouldn't be too tough. If you are not handy, pay the $99 and have a beer while you watch.
A:AnswerHello Breeee123 - this is Nancy at GE Appliances and I am happy to help you. This microwave offers the Cooking Complete Reminder to remind you that you have food in the oven. The oven will display “Food is ready” and beep once a minute until you either open the oven door or press the CANCEL/OFF button. I hope this helps! Thanks for checking with us!
