A:AnswerHey there, we're sorry to hear your microwave needs to be replaced, but we appreciate your loyalty to us and we're happy to help. We're pleased to tell you model JVM617SSKSS will fit your space, but the new mounting bracket will need to be used with it as these are model specific. In case you're still shopping, it may be handy to know all 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. We hope you find this helpful and we're wishing you the best. Thank you for choosing GE Appliances! - Guy@GEA
A:AnswerHi mhsu2000, thank you for reaching out to us and for your patience. We truly appreciate your interest in this over-the-range microwave to replace your current unit and are happy to help you with this! While you may see slight differences in the dimensions between models, all 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. This design is intended to make choosing a replacement microwave easy. - This model, JVM6175SKSS, or the similar JVM3160RFSS model, would both be a fantastic choice for a replacement! They would also provide you with a larger interior capacity than your previous model as well as additional features. However, when replacing an over-the-range microwave, the mounting bracket and hardware included with the new microwave should be used since the mounting bracket is specific to each model. We sincerely hope that this information is helpful for you and are so glad to have you as a loyal member of the GE Appliances family. Please don't hesitate to reach back out to us if you have any additional questions about replacement models or performing the installation in the future. All the best! -Eliza@GEA
A:AnswerHi SERNY, thanks for reaching out! We'd be happy to help. The approximate dimensions for this model are as follows: 16 5/16" H x 29 7/8" W x 15 9/16" D. If you have questions about the mounting space for this new unit, information about this can be found on page 6 of your Installation Instructions. - When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We hope that this helps and that you're staying safe. -Michael
A:AnswerHi MissMary, thanks for reaching out! We'd be happy to help! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. This makes choosing a replacement microwave easy! - NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. The new mounting equipment will be included with the new microwave. - The new model that you've provided will make for a wonderful replacement! We hope that this helps! All the best. -Michael
A:AnswerThere is an option for venting the microwave inside rather than outside. The person who remodeled my kitchen was able to vent my microwave inside, so I'd think any installer would be able to do the same for you.
A:AnswerHello Lee. Yes, this model will be a good replacement for your existing microwave oven. You may also want to consider the following two models as replacements:ttps://products.geappliances.com/appliance/gea-compare/&sku=JNM7196SKSS&sku=JVM7195SKSS
Thank you for your interest. Olga
A:AnswerHi LJB - Yes, the over-the-range microwave ovens are designed for adaptation for the following three types of ventilation: 1. Outside Exhaust (Vertical – Delivered from factory in vertical position). 2. Outside Exhaust (Horizontal). 3. Recirculating (Non-vented ductless). See Installation Guide for complete detail: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40765.pdf - Thanks for choosing GE. Enjoy! Sue
A:AnswerHi Jerry - When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Also, all 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Check out our GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195EKES with sensor cooking controls (senses humidity from foods and automatically adjusts time and power for best results). It also has an easy-clean, dark gray porcelain enamel interior with steam clean option. Play Video: https://youtu.be/wSIh-YJSlt0?list=PLX8_V2wHGuhntzHGB3F5dEMg4YMkWMcxt - Keep in touch! Sue
A:AnswerHi Me- The vent fan does not automatically come on every time you operate microwave. All over-the-range microwaves have an automatic fan as a safety feature. This fan automatically turns on if the unit is overheating. This is in addition to the fan switch that manually controls the exhaust fan. The built-in thermostat causes the exhaust fan to turn on automatically if the temperature around the control panel rises to approximately 150 degrees F. This feature helps protect the electronic components and also helps the cooking area get rid of excess heat. The thermostat resets itself and the fan shuts off when the surface area cools to approximately 150 degrees F or less. View Video: https://youtu.be/6LoK1geGXbQ - Thanks for viewing GE. Keep in touch! Sue
A:AnswerHi TomsRiverSal - Yes, the over-the-range microwave ovens are designed for adaptation to the following three types of ventilation: *Outside exhaust (horizontal)
*Outside exhaust (vertical), *Recirculating (non-vented). Thanks for choosing GE! SUE@GEA
A:AnswerHi Jane- It's nice to hear from you! Thanks for continuing to make GE Appliances a part of your home. Actually, you can choose any model. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. This makes choosing a replacement microwave easy. We suggest models GE Profile™ Series 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9215SKSS (My Cycle- Create a custom cook time setting, and with one touch, cook your favorite dish just the way you like) and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS. These models have sensor cooking like PVM1870SM3SS and feature our new dark gray, easy-clean enamel interior with Steam Clean. Play Video: http://products.geappliances.com/appliance/gea-support-search-content?contentId=23964 - We hope this is helpful. Keep in touch! SUE@GEA
A:AnswerHi chitown- Thanks for choosing GE! GE® Over-the-Range Sensor Microwave Oven JVM6175SKSS is compatible with Optional 36" Side Filler Panel Kit JX36CSS. Hang a 30-inch over-the-range microwave in a 36-inch opening with this GE Appliances microwave filler kit. Enjoy! SUE@GEA
A:AnswerHi Donna- Thanks for choosing GE! So that we can better assist you, please provide the model number of your GE Spacemaker XL1800 microwave. You can find the rating plate with model number inside the microwave or on the bottom of over-the-range microwave, usually near the back. Contact our GE Appliances Parts Team for assistance at 1-877-959-8688, Mon–Fri 8am–7pm, Sat 8:30am–5pm ET. You can also chat or email us from our Contact Us page at GEAppliances.com: http://www.geappliances.com/ge/service-and-support/contact.htm?icid=GEARtopnav-contact - Keep in touch! SUEatGEA
A:AnswerHello, Thank you for your question. I am happy to help. Model JVM6175DKWW will fit in the same space as your current model, however, you will need to use the mounting bracket that comes with the new model. I hope this helps. Thank you for checking with us. Lisa from GE Appliances.
A:AnswerHi KS- We appreciate your loyalty! Yes, the dimensions are comparable. PVM1870SM2SS is approximately 29 7/8"W x 16 7/8"H x 15 1/4"D. JVM6175SKSS is approximately 29 7/8"W x 16 1/2"H x 15"D. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Enjoy! SUEatGEA
