Early Black Friday DealsNew Doorbusters every Friday.Shop now

Skip to content
Gift Ideas
26 Cypress St
Williston, VT 05495
Open until 9 pm
Find Another Store
Main Content

Questions & Answers

Your price for this item is $314.99
The comparable value price is $467.99
Page Showing 261-280 of 411 questions
  • QuestionWhat material is the handle made from, stainless steel? Plastic? Other? Thank you

    Asked by BobE.

    • Answer Hi Katie, thanks so much for your question! The handle on this microwave is made from plastic. We hope that this is helpful! Stay safe. -Michael

      Answered by GE Answers

  • QuestionHow do you remove surface glass to change the light bulb?

    Asked by Surface1Light.

    • Answer Hello, thank you for reaching out to us. If the interior light needs to be replaced, follow these instructions: 1. Unplug the microwave oven. 2. Remove or open the vent grille or vent cover. Instructions are in the "To Remove the Charcoal Filter" section of your Owner's Manual. 3. Once the vent is removed or opened, remove the lamp compartment cover by removing the screw that holds the cover in place. If the cover is too difficult to access, a service technician will be required. 4. If you have a charcoal filter, remove it so that you can see the access area. On some models, the access area is small and it can be difficult to get to the light cover. 5. Remove the bulb Incandescent lamps: Remove by pushing inward gently and turning counter-clockwise. Halogen lamps: Gently pull straight out 6. Replace the old bulb with the same wattage bulb. 7. Replace the compartment cover and vent grille. 8. Plug in the microwave. However, if the cooktop/nite light needs to be replaced, follow these instructions: 1. First disconnect the power at the main fuse or circuit breaker panel, or pull the plug. 2. Remove the screw from the side of the light compartment cover and lower the cover until it stops. 3. Be sure the bulb is cool before removing. Break the adhesive seal by gently unscrewing the bulb. 4. Screw in the new bulb, then raise the light cover and replace the screw. Connect electrical power to the oven. We hope this helps. If you have any additional questions, please feel free to reach back out to us. HC

      Answered by GE Answers

  • QuestionI nIeed to replace my modelJVM1950DRIWW.. Can I use model JVM1950DRKWW

    Asked by joanne.

    • Answer Hello joanne, Thank you for reaching out. The two models you provided are in fact the same model. The only difference is an extra letter. When the model is manufactured, these extra letters/numbers are placed on the appliance rating plate and product registration card. These letters/numbers are used to identify manufacturing specific data when the appliance is made. Should service or parts be needed, these are used as identifiers for the specific appliance. Hope this helps! Best wishes -Mike

      Answered by GE Answers

  • QuestionIneed to replace my model jvm1950driww. can i use model jvm1950drkww microwave

    Asked by jo.

    • Answer Hello jo, Thank you for reaching out. The two models you provided are in fact the same model. The only difference is an extra letter. When the model is manufactured, these extra letters/numbers are placed on the appliance rating plate and product registration card. These letters/numbers are used to identify manufacturing specific data when the appliance is made. Should service or parts be needed, these are used as identifiers for the specific appliance. Hope this helps! Best wishes -Mike

      Answered by GE Answers

  • QuestionWe currently have a GE 1.9 Over the Range Microwave # JVM7195SF1SS that we are looking to replace due to a faulty door. Will this be a direct replacement? I think our current model has a front height of 16 inches and a rear height of 16 1/4.

    Asked by Jimmy.

    • Answer As long as the width is 30". You may have to change the mounting holes. These all seem to have different wall plates and support holes in the overhead cabinet. I had to redo my mounts, but with the included template, it took no time at all.

      Answered by Buzzard

  • Questiondo you have upgraded models that are the same size as jvm7195sk?

    Asked by Glad.

    • Answer Hello Glad - Thank you for the excellent question about our wide range of microwaves. We are always happy to help. For over-the-range models with more features to offer, we recommend checking out our Profile line. You can find a few of the options here: https://www.bestbuy.com/site/compare?skus=5269000,4321128,5439301,2557107 Please let us know if you have any more questions. - JB

      Answered by GE Answers

  • QuestionHow do you change one of the lights inside a spacemaker over the range GE microwave

    Asked by Cookie.

    • Answer Hi there, Cookie - Great question! The interior light in your over-the-range microwave is not consumer replaceable due to its location in the microwave. The lamp will need to be replaced by a service technician. Thanks for checking! -Mikayla

      Answered by GE Answers

  • QuestionI have tiles would that effect new installation?

    Asked by beau.

    • Answer Hi Beau: We also have a tile back splash but I was replacing an existing microwave. The installation instructions should give you direction on this as to what size space you need to allow for but there should be some allowance for the depth. The width of the hole is less forgiving because there is a minimum amount of space required but you can check the install instructions to see what these are: https://products.geappliances.com/appliance/gea-specs/JVM7195SKSS/install My other advice is to have a good masonry bit, wood bit and a stud finder on hand. Even though I was just replacing another GE microwave, the mounting bracket for the new one was different and required that I drilled new holes through the tile. The first bit I used was worn and took forever on the first two holes and then I found my better one and it zipped right through. Overall, my installation went pretty smoothly and I had mine installed inside of any hour. Hope this helps and good luck.

      Answered by AlanL

  • QuestionWe need to replace our over-the-range built-in GE Spacemaker Microwave xl1800 Model#: JVM1860 BF001. Will this model work for us?

    Asked by PAT.

    • Answer Hello Pat - Thank you for reaching out about this amazing microwave. We would love to share more about it. Both your current model and JVM7195DKBB are 30" over-the-range microwaves. This means they will work nicely in the same installation space and be easy to replace. Please let us know if you have any more questions. - JB

      Answered by GE Answers

  • QuestionI'm looking to replace my GE over the range microwave, model PVM1870DM3BB. What current model has the same features and will be the same size? I'd like to go with stainless steel this time.

    Asked by Debbie.

    • Answer Hello Debbie - Thank you for reaching out about this brilliant microwave. We are always happy to help. The model JVM7195SKSS would be a wonderful, stainless steel replacement for your current unit. It will fit your space, has sensor cooking, and most of the same features to model PVM1870DM3BB. Please let us know if you have any more questions. - JB

      Answered by GE Answers

  • QuestionNeed to replace my ge microwave. It is an under counter built in. My opening is 36”. I see no microwaves this size. What are my options

    Asked by Anonymous.

    • Answer Ask your vendor. You can purchase the GE 36 in. Over the Range Microwave Accessory Filler Kit in the finish to match your microwave. It is basically a panel on each side, 3" each side. When it's installed, it looks like a single unit.

      Answered by Nann

  • QuestionMy sensor keeps having an error and does not heat up a simple cup of water for tea. I do not see anywhere on how to fix this error. Most of the time I have to wait a day in order to be able to use the microwave again and for it to heat anything up ?

    Asked by Donna.

    • Answer Hi Donna - Thanks for reaching out to us regarding your GE Microwave Model # JVM7195EKES. We are sorry to hear of the error when trying to heat water for your tea. This is frustrating, we know. The Beverage function on this model is sensor-controlled. The microwave will detect the serving size and adjust the heating time accordingly. To use the Beverage feature, simply press the Beverage pad one time (oven starts immediately). SENSOR ERROR appears on the display if the door is opened before steam is detected. Do not open door until steam is sensed and time is shown counting down on the display. Also, Sensor Reheat is for single servings of recommended foods, 4-16 oz. of any beverage. Use Cook Time option for other amounts. Here's the link to the Use and Care Guide: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-7000093.pdf - If using as directed in the manual, try a reset by turning off power at the circuit breaker for 30 seconds or so. A technician may be required for an accurate diagnosis. To schedule service online visit: https://www.geappliances.com/ge/service-and-support/service.htm - We hope this is helpful. If you have any additional questions, don’t hesitate to ask. We are also happy to help at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionI’m looking to replace model JE1860SH 03 is this model equivalent to that model

    Asked by Rockport1.

    • Answer Hi Rockport1 - It's nice to hear from you! We are sorry to hear your microwave model JE1860SH03 needs replacing and apologize for any inconvenience this has caused. Over-the-Range Microwave Model JVM7195SKSS cannot be installed in the same cabinet. We suggest GE Profile™ 2.2 Cu. Ft. Built-In Sensor Microwave Oven Model #: PEB7227ANDD. This model is compatible with 27" Trim Kit JX7227SLSS (Stainless steel) and 30" Trim Kit JX7230SLSS (Stainless steel) sold separately. We suggest viewing the Specifications document for details including cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - We're glad to have you in the family. If you have any additional questions, we are happy to help at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionNeed a over the top microwave . Has to be 16” x 29 3/4 stainless steel. Can you give me some model numbers to choose from.

    Asked by Kansas.

    • Answer Hi Kansas - Thanks for viewing GE! All GE 30" over-the-range microwaves are approximately the same width (29 7/8"), and are designed to fit into a standard 30" wide x 12"-13" deep cabinet opening. We suggest viewing our selection of models in stainless steel at: https://www.geappliances.com/ge-appliances/kitchen/microwaves/?Type=Over-the-Range&Color=Stainless%20Steel&Cooking%20Technology=Microwave%20Only - Keep in touch at GEAppliances.com. Sue

      Answered by GE Answers

  • QuestionMy GE Profile micro wave is 36 in. wide.,including a 6in fill the space plate. It needs to be replaced and the current models are only 30 in. wide. What can I do? Also if the charcoal filter is not replaced when needed, can that shut down the machine.

    Asked by jim.

    • Answer Hi Jim- Thanks for reaching out to us! We are sorry to hear your 36" GE microwave needs replacing and apologize for any inconvenience this has caused. When replacing a 36" over-the-range microwave, you will also need to purchase a 36" filler kit to allow it to be installed in a 36" cut-out opening. If available, the 36" filler kit will be listed in the product specifications. Model JVM7195SKSS is compatible with Optional 36" Filler Panel Kit JX36BSS (sold separately). We suggest viewing page 2 of the Quick Specs document here: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195SK_EK_C3.pdf - Also, the charcoal filter helps remove smoke and odors. The charcoal filter should be replaced when it is noticeably dirty or discolored (usually after 6 to 12 months, depending on usage). The microwave generally does not shut down when dirty, however it will not effectively remove smoke and odors. We certainly appreciate your loyalty! If you have any additional questions, don’t hesitate to ask. We are also happy to help at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionIs this fingerprint resistant

    Asked by Ro.

    • Answer Hi Ro - Thanks for viewing GE! Model # JVM7195SKSS is not fingerprint resistant. Check out GE® 1.7 Cu. Ft. Over-the-Range Sensor Fingerprint Resistant Microwave Oven Model # JVM6175YKFS. We'd love to have you in the family. Keep in touch at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionWhat replaces a GE Spacemaker XL microwave oven Model JVM 1860 SD?

    Asked by rjdsr.

    • Answer Hello and thank you for the excellent question. We are happy to help. Model JVM7195SKSS would be an excellent replacement for your current unit. Please keep in touch! - JB

      Answered by GE Answers

  • QuestionHow much does it weight?

    Asked by Anonymous.

    • Answer Hi - Thanks for considering GE Model JVM7195SKSS! Net Weight is 55 lbs. If you have any additional questions, do not hesitate to ask, we are also happy to help at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionI have a GE microwave model PVM1870SMSS. It was discontinued but I need to replace it and need the replacement to fit in my kitchen. Which current model would fit in the space? Thanks

    Asked by Patty.

    • Answer Hi Patty - Thanks for reaching out to us! We are sorry to hear your microwave PVM1870SMSS (Dimensions: 16 7/8 H x 29 7/8 W x 15 1/4 D) needs replacing and apologize for any inconvenience this has caused. Model JVM7195SKSS (Dimensions: 16 5/16 H x 29 7/8 W x 15 9/16 D) is a great choice and can be installed in the same cabinet as your current model. All GE 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. This makes choosing a replacement microwave easy. We certainly appreciate your loyalty! If you have any additional questions, do not hesitate to ask, we are also happy to help at GEAppliances.com! Sue

      Answered by GE Answers

  • QuestionIs the mounting bracket on the very bottom of the microwave? My old microwave is only 15 5/8" tall, and if I have to put a mounting bracket any lower than that it will have to be on top of backsplash.

    Asked by Anonymous.

    • Answer Hi - Thanks for considering GE Model JVM7195SKSS! Yes, the mounting bracket gets installed at the back bottom edge of the microwave. We suggest viewing pages 9, 12 and 14 of the Installation Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-7000091-1.pdf - We suggest viewing the Quick Specs for all product dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=JVM7195SK_EK_C3.pdf - Keep in touch at GEAppliances.com. Sue

      Answered by GE Answers