Questions & Answers

Q: QuestionWill Model: PCWK22U1WBB fit in the trim kit JX7230SF1SS ?

Asked 2 weeks ago by sujai.

• A:Answer No, the compatible 30" trim kit with this microwave is JX7230DLBB.

  Answered 2 weeks ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy question was is this 1.2 cu ft GE Profile operable in my cutout of 18”D x 17.25”H x 25.25 W with it protruding a few inches out of the cutout?

Asked 3 weeks ago by Vince.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer We do not advise installing this microwave in your current cutout space due to the depth of your cutout. If your receptacle is in the cabinet, your cutout would need to be 22" minimum. However, if your receptacle is located outside of the cabinet, the cutout depth would need to be 19-1/2" minimum. Installing this appliance in your current cutout would cause the microwave to protrude from the trim kit and cabinet. In this case, we would advise altering the cutout space for the proper installation of this microwave model.

  Answered 2 weeks ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this GE Profile work OK in a cutout 18"Dx25.25"Wx17.25"H if we set it so it stuck out a couple inches?

Asked 3 weeks ago by Vince.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer This model won’t fit on your space, this is because the unit is much deeper than your cabinet about 25″ vs 18″, and built-in microwaves need to be fully enclosed, not sticking out.

  Answered 3 weeks ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI'm replacing my old built in microwave JE2160sf and would like to know if my existing trim kit JX2127SH will work for this model?

Asked 1 month ago by Michael.

• A:Answer Trim kits are designed to be model specific, and we don't recommend using trim kits that don't come with your new microwave.

  Answered 1 month ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionSo I have in cabinet the 30” built-in trim kit model : JX7230SL2SS Serial : VR251646A installed for old microwave Ge profile 2.2 cu ft So ordered a GE 2.2 cu ft built microwave model : PCWK22U1WDD Can I use this trim?

Asked 1 month ago by Anonymous.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer The JX7230SL2SS trim kit is compatible with and can be installed with the PCWK22U1WDD GE Profile 2.2 cubic foot built-in sensor microwave.

  Answered 1 month ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE model PEB7226SF2SS with trim kit JX7230SF1SS. Which current model is a fit with my existing trim kit?

Asked 1 month ago by frustrated.

• A:Answer Our trim kits are model specific, so we do not offer another microwave that is compatible with your trim kit.

  Answered 1 month ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI need to replace a GE Profile JE1390GA 001 microwave convection with 30" trim JX1330MBV. What model would you recommend?

Asked 2 months ago by BEC.

• A:Answer We recommend checking out model PCWK22U1WBB. This model shares the same finish, cooking features, and has a larger capacity. However, the cutout dimensions are different, being 17 W x 10 H 1/8 x 18 3/8 D compared to your previous models cutout dimensions of 14-1/2 W x 10-1/8 H x 14-1/2 D. We recommend checking your space to see if it can meet the requirements posted in the specifications. These can be viewed by clicking on "Features" under the product image, then scrolling down the page on the right, until you see a link under "Specification Sheet."

  Answered 1 month ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionhow many watts

Asked 2 months ago by Anonymous.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer This microwave offers 1100 watts of cooking power.

  Answered 2 months ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this a plug in microwave

Asked 2 months ago by Tracy.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer Yes

  Answered 1 month ago by MaryM

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI currently have an 8 year old GE Profile PEB7277SLSS with trim kit JX7230SLSS. What is a compatible replacement microwave that can be used with the same trim kit?

Asked 2 months ago by Hank.

• A:Answer Our PCWK22U1WDD model is compatible with your existing built-in kit.

  Answered 2 months ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill the trim kit for my PEB2060DM2BB work with this microwave?

Asked 3 months ago by RandyM.

• A:Answer Yes, works very well

  Answered 2 months ago by user409502

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwe are replacing GE Profile PEB7227SLSS and want to know if the trim kit we have now will fit this oven.

Asked 4 months ago by barbarina.

• A:Answer Our trim kits are model specific. The compatible trim kits for this microwave model are part JX7227DLWW (27") and part JX7230DLWW (30").

  Answered 3 months ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI'm looking to replace my built-in Model #:JE2160SF?

Asked 4 months ago by Anonymous.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

Q: QuestionGE Built in Model # PEB7227SLISS needs replacement. What models are compatible? Will it fit kit JX7227SLSS, if in fact there is a replacement model?

Asked 4 months ago by Repeat.

• A:Answer This model microwave and trim kit will work well as a replacement for your current model.

  Answered 4 months ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE profile microwave PE87227BL1TS and I need to replace it, what model should I pick. I have a 30" trim kit JX7230SLSS that goes with it, can I reuse that with the new microwave?

Asked 4 months ago by Alex.

• A:Answer Screw GE - buy a new trim kit off of ebay for just a little over $100. It is ridiculous that the older trim kits do not fit the new ones. That is why our landfills are full.

  Answered 3 months ago by Tireflat

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI have model JE1640GA Which trim kit would I need and is this the correct replacement microwave? the exterior of the trim kit is currently 29.5x19.5

Asked 4 months ago by micro.

• A:Answer Screw GE - they will always answer that the trim kit is model specific and you have to buy their new kit. Buy a new trim kit off of ebay for just a little over $100. It is ridiculous that the older trim kits do not fit the new ones. That is why our landfills are full.

  Answered 3 months ago by Tireflat

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionNeed to replace ge over the range microwave model JVM7195DF1BB Which microwave will work for us

Asked 4 months ago by Marge.

• A:Answer The model you currently have has a built-in vent underneath it as it is designed to be installed above a range or cooktop surface. This model you mentioned does not have a vent underneath, so it cannot be used in your installation. All 30" over-the-range microwaves are approximately the same width and are designed to fit into a 30" wide cabinet opening. Therefore, any of our current 30" over-the-range microwave models will work as a replacement for an existing 30" over-the-range microwave model, such as our new model JVM7195DKBB. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and Installation Instructions needed to complete the installation process. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts and exhaust adapter should also be used.

  Answered 4 months ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI currently have a GE Profile PEB7226SF1SS with a trim package. Is there a replacement that will allow me to use my trim kit?

Asked 5 months ago by VR.

This question was asked about the related product: GE Profile - 2.2 Cu. Ft. Built-In Microwave with Sensor Cooking and Glass Touch Controls - Gray

• A:Answer Screw GE - they will always answer that the trim kit is model specific and you have to buy their new kit. Buy a new trim kit off of ebay for just a little over $100. It is ridiculous that the older trim kits do not fit the new ones. That is why our landfills are full.

  Answered 3 months ago by Tireflat

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI need to replace GE Profile microwave PEB7227ANDD with a model that will fit the same trim kit.

Asked 5 months ago by Anonymous.

• A:Answer Screw GE - they will always answer that the trim kit is model specific and you have to buy their new kit. Buy a new trim kit off of ebay for just a little over $100. It is ridiculous that the older trim kits do not fit the new ones. That is why our landfills are full.

  Answered 3 months ago by Tireflat

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)