Questions & Answers

Q: QuestionDoes this GE Profile range hood have a light?

• A:Answer Yes, this range hood features dual LED lights to illuminate the cooktop.

Q: QuestionWhat is the maximum airflow capacity of this range hood?

• A:Answer This range hood has a maximum airflow capacity of 450 cubic feet per minute.

Q: QuestionIs the grease filter on this range hood dishwasher safe?

• A:Answer Yes, the grease filter is dishwasher safe for easy cleaning.

Q: QuestionWhat type of bulb does the range hood use?

• A:Answer The range hood uses LED bulbs.

Q: QuestionDoes the range hood come with a remote control?

• A:Answer No, this range hood does not come with a remote control.

Q: QuestionWe have an angled ceiling that is 10' high at the installation point. There is no attic. Can this unit be installed to vent externally?

Asked 2 years ago by Slanted10ftceiling.

• A:Answer Hello- Thanks so much for your interest and checking with us. This vent hood is designed to be installed onto a wall with no above cabinets. Install these hoods between the required 24" minimum and 36" recommended maximum above the cooking surface. The hood installation height above the cooking surface depends upon ceiling height and duct cover limitations. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. NOTE: Installation height should be measured from the cooking surface to the lowest part of the hood. This hood must be installed onto a wall. It can be vented to the outdoors. Please reach out to us directly if you have any other questions. We are here to help! Joyce@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this vent hard wired or will I need a receptical plug

Asked 3 years ago by Benny.

• A:Answer Mine was hard wired

  Answered 3 years ago by WayneAVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat size vent pipe runs from the ceiling through the attic to the roof. I need my roofer to install the vent boot on my new house. Thanks

Asked 3 years ago by Calvin.

• A:Answer My contractor suggested 9"-12" vent pipes, but after seeing the hood, he said it would make more sense economically to have it recirculate throughout the kitchen with the vent and fan near the top where it attaches to the ceiling.

  Answered 3 years ago by WayneAVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan we cut the duct to make it shorter. my ceiling heights to countertop is 85 inches.

Asked 3 years ago by Anonymous.

Q: QuestionDo I need a special kit for a celling with an angle?

Asked 4 years ago by PabloQ.

• A:Answer Hello - Thanks for your question; we are glad to assist. There is not a special kit for a ceiling with an angle. Thanks for checking. Olga@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes a convertible range hood have to vent to the outside?

Asked 4 years ago by Hood.

• A:Answer Hi Hood, thanks for reaching out to us. No, this range hood can also be recirculated indoors. We hope this is useful information! If you have any other questions, you can reach out to us via e-mail through the Contact Us page on our website so that a member of our team can help. - Guy@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThis will be installed in a kitchen w/ 9' ceilings and I'd like the fan approximately 30" above the cook surface. What is the maximum height of the duct column without having to use an extension?

Asked 6 years ago by Susan65.

• A:Answer Hi Susan65- The supplied duct cover fits 7'11" to 9'10" ceiling heights (10' in recirculation mode). We suggest to view the Installation instructions at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80550-4.pdf - Thanks for choosing GE! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this be installed over a range that is against the wall, and attached to the wall instead of the ceiling like a typical range hood?

Asked 2 years ago by SVK.

• A:Answer Hi there - These vent hoods are designed to be installed onto a wall with no above cabinets. The vent hood must be installed between the required 24” minimum and 36” recommended maximum above the cooking surface. The hood installation height above the cooking surface depends upon ceiling height and duct cover limitations. The telescopic duct cover conceals the ductwork running from the top of the hood to the ceiling. We hope you choose to be part of the Profile family! -Don@GEA

  Answered 2 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question