“how do I fold it properly when putting away and what is the best way to completely (and quickly) deflate it?”
Answer This Question
1-2 of 2 Answers
Here is the procedure to store the product after use: 1. Remove the stakes from the ground and unclip the tethers. 2. Unplug the pump and open the zipper (in the back near the bottom) to deflate your screen. 3. Disconnect the air intake tube from the pump. 4. Unclip the screen from the frame. 5. Carefully fold the frame and screen respectively, for speeding up the deflation, roll the frame from the top to bottom, that will help to squeezing out air faster. And better rolling the screen for storage to minimize the fold mark on the screen.
Sorry, there was a problem. Please try again later.To deflate quickly first there is a zipper at the bottom of screen unzip it all the way. Then detach the white Screen fold and put away. Fold off each long side of black sections to the center then start rolling it from one end and sit on it each time you roll to get the air out keep rolling until you are done.
Sorry, there was a problem. Please try again later.