Questions & Answers

Q: QuestionHow much can I adjust the height of the monitor with this mount?

• A:Answer You can raise your monitor from 5.91 to 14.96 inches with an extension up to 16 inches.

Q: QuestionWhat is the maximum monitor size supported by this mount in portrait mode?

• A:Answer This mount supports monitors up to 28 inches in portrait mode.

Q: QuestionCan I rotate the monitor on this mount?

• A:Answer Yes, the monitor can rotate a full 360 degrees on the mount.

Q: QuestionDoes this monitor mount come with a cable management system?

• A:Answer Yes, this monitor mount features a cable management system to keep your cords organized.

Q: QuestionAll of the product pictures show the clamping nut for the arm on the right side of the pole. Is this the only location it can safely be load bearing or can it be clamped on at a slightly different angle to change the arms range of movement?

Asked 3 months ago by AgainBen.

• A:Answer For anyone wondering if it is still stable to move the clamp to the other side of the pole the answer is yes. TLDR; Yes it is still stable.

  Answered 2 months ago by AgainBenVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this mount compatible with AW3225QF? Cause I received it today but couldn't put on my monitor. Thanks in advance.

Asked 10 hours ago by Bxchinchecka.

Q: QuestionCan this mount to a PG32UCDM Asus monitor?

Asked 3 weeks ago by Jake.

Q: QuestionHow tall is the poll from the base of the desk?

Asked 1 month ago by JeannieB.

Q: QuestionIs this a gas powered monitor arm?

Asked 2 months ago by Holden.

Q: QuestionWhat are the distances between the holes on the brace? I am trying to figure out if this would attach to my monitor

Asked 3 months ago by Bebe.

• A:Answer Depends on your monitor. It could attach flush or it might need stand offs. Regardless: the kit has every single bolt, bit, stand off, spacer you might want. Heavy duty and won’t disappoint.

  Answered 2 months ago by ImpliedConsentVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this fit a Vizio tv?

Asked 3 months ago by Anonymous.

• A:Answer Likely not. TVs usually use a larger mounting pattern. This supports up to 100mm VESA mounting points. Most TVs, even smaller ones, use a larger mounting pattern.

  Answered 3 months ago by WhensDinnerVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a 40” Vizio tv that is 35.5 inches wide, will this work do you think?

Asked 3 months ago by ROC32.

• A:Answer Regardless of what the literature might say, I would have zero confidence this would work for your application. IMHO

  Answered 3 months ago by JimSVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncould this mount fit onto a msi optix g27c2 mount? sorry i want to make sure that it fits correct before buying.

Asked 4 months ago by pat.

• A:Answer Thank you for your inquiry, Pat! No, the MSI Optix G27C2 does not have standard VESA mounting holes built into the back of the monitor. Tine | Insignia Support

  Answered 4 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the diameter of the pole itself

Asked 4 months ago by Anonymous.

• A:Answer Hi! The Insignia™ Desktop Mount for Monitors up to 35” Wide features a pole with a diameter of approximately 1.4 inches. This is a fairly standard size, making it compatible with most clamp-on accessories or additional arms designed for monitor mounts. -Ed | Insignia Support | https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285 Let me know if you’d like help finding compatible accessories or have any other questions about this mount!

  Answered 4 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow much clearance does the clamp need under the desk?

Asked 5 months ago by Linds.

• A:Answer It needs at least 3.25in clearance from the top of surface the top of the clamp sits on.

  Answered 4 months ago by DanielleGVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the diameter of the pole?

Asked 6 months ago by pmaybe.

• A:Answer Thank you for your inquiry! The Insignia™ Desktop Mount for Monitors up to 35” Wide features a pole with a diameter of approximately 1.4 inches (35.6 mm). This is a common size for monitor mounts and should be compatible with most clamp-on accessories or additional arms designed for standard poles.

  Answered 6 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question