“I have a Liftmaster 2265 garage door opener. Where do the Quick Connect wires go in the first two slots in the Liftmaster and which slots red for red and black in the white slot? Thanks!”
Answer This Question
1-3 of 3 Answers
The two wires from the Insignia controller cable connect to the left 2 terminal block contacts in the back of your Liftmaster opener. The order of the wires from the Insignia controller is not important but make sure the wires currently connected to these two terminals stay in the same spot. It is best to remove one wire at a time from the opener's terminal block and wrap one of the wires from the Insignia controller cable with it and insert it back in the same hole. Then repeat for the second wire. The second video in this link shows this: https://connect.bestbuy.com/gdc/gdc-install-videos.html
Sorry, there was a problem. Please try again later.There should be two wires doing to the wall control. The quick connect wires will go into those. You should be able to put the red with one and the black with the other and it doesn't appear to matter which goes to which.
Sorry, there was a problem. Please try again later.Red or white doesn’t matter.
Sorry, there was a problem. Please try again later.