A:AnswerDear customer,
Thank you very much for your inquiry! Regarding your question about using a basement sump pump, I would like to clarify that the Jackery Explorer E1000 v2 has a rated output power of 1000W, but its peak power allows for higher instantaneous starting power.
Generally speaking, small or medium-sized sump pumps often require more than 1000W of instantaneous starting power during drainage, so the E1000 v2 may not be able to guarantee stable power during peak drainage. This is especially true during periods of heavy rain, when the pump cycles every 10 minutes, which may cause a power shortage.
If you require safe and reliable backup power for your sump pump, we recommend considering a higher-power model.
If you would like to provide the rated power and model of your sump pump, we can help you further determine the most suitable model and configuration.
📧 [email protected]
📞 +1-888-502-2236 (Weekdays 9 AM – 5 PM PST)
Wish you a happy life!
Team Jackery
A:AnswerHello Customer,
Thank you for your question! The Jackery Explorer 1000 V2 (E1000v2) can power many small appliances in an RV, but whether it can operate a 19 ft RV slide-out depends on the wattage requirement of the slide-out motor.
Most RV slide-out motors require a high surge wattage when starting. The Jackery E1000v2 has a capacity of 1002Wh and a continuous AC output of 1000W (with a peak of 2000W)., so if your slide-out’s starting wattage is within this range, it should work.
To be sure, we recommend checking your RV slide-out motor’s starting and running wattage. If you need further guidance, please contact our support team:
📧 [email protected]
📞 +1-888-502-2236 (Weekdays 9 AM – 5 PM PST)
We’re happy to help ensure you get the right setup for your RV!
Warm regards,
Team Jackery
A:AnswerDear Customer,
Thank you for your question!
The Jackery Explorer 1000 V2 is a powerful portable power station with a 1070Wh capacity and a 1500W continuous output, capable of handling various devices and appliances.
Regarding the Junior Hack Attack Baseball Pitching Machine, it typically requires a 1000W generator for optimal performance . Given that the Explorer 1000 V2 has a 1500W continuous output, it should be capable of powering the pitching machine.
Estimated Runtime:
Pitching Machine Power Consumption: Approximately 1000W
Explorer 1000 V2 Capacity: 1070Wh
Estimated Runtime: Approximately 1 hour
Important Considerations:
Startup Surge: The pitching machine may have a higher surge wattage during startup, which could briefly exceed the Explorer's capacity. However, the Explorer 1000 V2 can handle surges up to 3000W, so it should manage the initial surge without issues.
Continuous Operation: For extended use, it's advisable to monitor the power station's status to prevent over-discharge.
Solar Charging: If you're using solar panels to recharge the Explorer, ensure you have sufficient sunlight and appropriate panels to maintain the power supply.
If you need further assistance or have more questions, please feel free to contact us:
📧 [email protected]
📞 +1‑888‑502‑2236 (Weekdays 9 AM – 5 PM PST)
Best regards,
Jackery Customer Service Team
A:AnswerDear customer,
Thank you for your inquiry regarding the noise level of the Jackery Explorer 1000 v2.
We are pleased to inform you that the Explorer 1000 v2 operates at an ultra-quiet level of less than 22 decibels (dB). This noise level is comparable to a soft whisper or rustling leaves, making it ideal for indoor use, camping, or any situation where a peaceful environment is desired.
This quiet operation is made possible through advanced inverter technology and the use of high-quality LiFePO4 batteries, which also help eliminate harmful emissions, providing a clean and silent alternative to traditional gas-powered generators that typically operate above 60 dB.
Whether you plan to use the Explorer 1000 v2 at home, outdoors, or during emergencies, you can expect minimal noise disturbance without compromising performance.
If you have any further questions or need additional assistance, please feel free to contact us.
Customer Service Contact:
📧 [email protected]
📞 +1-888-502-2236 (Weekdays 9 AM – 5 PM PST)
Thank you for choosing Jackery!
Best regards,
Jackery Customer Support Team
A:AnswerDear customer,
Great question!
Yes, the Jackery Explorer 1000 v2 is absolutely capable of powering a PlayStation 5 (PS5). The PS5 typically consumes around 200W–220W during gameplay (and less in standby or idle mode), which is well within the 1500W output capacity of the 1000 v2.
With a capacity of 1,264Wh, here's an estimated runtime:
Estimated Runtime = 1,264Wh ÷ 220W ≈ 5.7 hours
This means you can expect around 5 to 6 hours of gaming, depending on usage, screen setup (if powering a TV), and power-saving features.
If you're only powering the PS5 (not a TV), the runtime may be slightly longer. For best results, use energy-saving mode and disconnect other unused devices.
Let us know your full setup and we’d be happy to help calculate a more exact estimate!
Best regards,
Jackery Customer Service Team
📩 [email protected] | ☎️ +1-888-502-2236 (Weekdays 9 AM–5 PM PST)
A:AnswerDear Customer,
Thank you for reaching out!
Yes, the Jackery Explorer 1000 v2 (E1000v2) can power the JBL Partybox 710. The Partybox 710 has a rated power consumption of around 100W–300W depending on the volume level and usage, which is well within the output capacity of the E1000v2. You should be able to enjoy several hours of playtime depending on the volume and additional features (such as lighting effects) you are using.
If you have any more questions, feel free to contact us at [email protected] or call us at +1-888-502-2236 (Weekdays, 9 AM – 5 PM PST) — we’re happy to assist!
Best regards,
Jackery Customer Support Team
