A:AnswerThe mount is essentially two parts; the braces that attach to the TV and the part that attaches to wall studs. If you leave the braces on the TV then all you'd have to do is remove the mount from the wall. That would only take a screw driver. To remount you'd need a way to find the wall studs to attach to, attachment screws if the ones you had won't work, and a drill to start the holes in the studs.
A:AnswerI can't answer about that specific TV. The instructions say it will work with any 26" to 54" TV. I used it with no problem on a 10 year old 48" Olevia TV which is very heavy. Current flat TVs are much lighter. The brackets mount on the back of the TV and then use a hook to fit onto the wall attachment. There are multiple screw sets that come with the mount to work with any TV. The bracket that fits to the wall is spaced for screws to screw into wall studs. The cautions is to make sure that you're attaching to wall studs. It would probably pull out of sheet rock. Setup is quick.
A:AnswerI don't know if it will work with the Samsung, but it says 26 to 55 inch TVs will work. No problem attaching to my old Olevia 42 inch LCDTV, which is much heavier than current 42 inch TVs. Will expand from the wall to allow the TV to pivot but will not allow my TV to pivot 90 degrees.
A:AnswerThe flat mounting braces are about 24 inches from edge to edge. If you put one edge on the corner wall stud it might pivot to almost 90 degrees. I don't have it mounted to pivot around a corner.
A:AnswerI'm not able to find that model number of TV. Please email us directly at [email protected] and pass along your TV's full model number and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 400x400 and is under the weight capacity of the M300 so it should work well! Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 200x200 and is under the weight capacity of the M300 so it should work well! Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a 600x400 VESA pattern and is NOT compatible with the M300. Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerOur TV mounts can be installed into wood studs, brick or concrete. Cinder block cannot be safely installed into. Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a 600x400 VESA pattern and is NOT compatible with the M300. Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerThe M300 extends 19.6" from the wall to the back of the TV. Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
A:AnswerYour TV has a compatible VESA pattern (bolt pattern) of 300x300 and is under the weight capacity of the M300 so it should work well! Please email us directly at [email protected] if you have any other questions and we'll be happy to help.
