A:AnswerThis dryer is equipped with a three-prong grounding plug for protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. The cords on washer/dryers is typically 6-8 feet. ^Daphane
A:AnswerThere are no tutorials or installation manual for LP conversion. The owner's manual states conversion should be installed by a qualified technician. You can try reaching out to to our technical support team for further assistance via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
A:AnswerThe can be vented to the left. Right side venting is not possible on gas models. When facing the front of the unit the vent would be on the right. The side venting kit is part 3911EZ9131X, https://www.lg.com/us/laundry-accessories/lg-3911ez9131x. ^Daphane
A:AnswerPlease reach out to our technical support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
A:AnswerIt is a single unit, not 2 stackable units. Having said that, the installers from Best Buy had no problem getting it through the front door and into the closet
A:AnswerIf you have a confined space to put it, I would recommend having Best Buy install it. The installers knew just what to do and they had all the right tools to get it installed amazingly fast.
A:AnswerRegrettably, the installation manual does not provide instruction on changing the orifice. LG recommends this be performed by a qualified technician. ^Daphane
A:AnswerYes, for the LP nozzle kit, order part number 383EEL3002D and it should be installed by a qualified technician and the change should be noted on the dryer, https://www.lg.com/us/laundry-accessories/lg-383eel3002d. ^Daphane
A:AnswerThe time for a load is not a published specification. When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. If the display shows -I--, the time will be displayed after the load sensing has detected the load size. The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual time. ^Daphane
A:AnswerPlease reach out to our support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
A:AnswerThe d80 error means the dryer is 80% clogged either in the air exhaust hose. Please reach out to our support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane