Where is the vent? null

What Vent? Are you talking about the air gap so it drains? The following is a excerpt from the installation manual: ■ A new drain hose is supplied with your dishwasher. If drain hose is not long enough, use a new drain hose with a maximum length of 12 ft (3.7 m) that meets all current AHAM/ IAPMO test standards, is resistant to heat and detergent, and fits the 1" (25 mm) drain connector of the dishwasher. See the “Tools and Parts” section at the front of the guide for part details and orders. NOTE: Do not connect multiple drain hoses together. ■ Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (508 mm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter or be connected to an air gap. ■ Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (508 mm) above subfloor or floor. ■ If required, the air gap should be installed in accordance with the air gap installation instructions. When you are connecting the air gap, a rubber hose (not provided) will be needed to connect to the waste tee or disposer inlet. ■ Use 1/2" (12.7 mm) minimum I.D. drain line fittings. The pictures are from the installation manual You can also google the model number and find the installation guide via Maytag

What Vent? Are you asking about the air gap so it drains? Here is excerpt from the installation manual "Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (508 mm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter or be connected to an air gap." find the installation manual here https://www.maytag.com/content/dam/global/documents/201811/installation-instructions-w108069060-revH.pdf There is more info on the drain on pages 22 thru 24

“Where is the vent?”

Asked by Dan 6 years ago

Answer This Question

See all questions & answers

Maytag - 24" Top Control Built-In Dishwasher with Stainless Steel Tub-Front_Standard

1-4 of 4 Answers

This model is not vented.
Answered by CommunityAnswer 6 years ago
Sorry, there was a problem. Please try again later.
Upper left side of door.
Answered by Clayton 6 years ago
Sorry, there was a problem. Please try again later.
What Vent? Are you talking about the air gap so it drains? The following is a excerpt from the installation manual: ■ A new drain hose is supplied with your dishwasher. If drain hose is not long enough, use a new drain hose with a maximum length of 12 ft (3.7 m) that meets all current AHAM/ IAPMO test standards, is resistant to heat and detergent, and fits the 1" (25 mm) drain connector of the dishwasher. See the “Tools and Parts” section at the front of the guide for part details and orders. NOTE: Do not connect multiple drain hoses together. ■ Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (508 mm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter or be connected to an air gap. ■ Make sure to use an air gap if the drain hose is connected to house plumbing lower than 20" (508 mm) above subfloor or floor. ■ If required, the air gap should be installed in accordance with the air gap installation instructions. When you are connecting the air gap, a rubber hose (not provided) will be needed to connect to the waste tee or disposer inlet. ■ Use 1/2" (12.7 mm) minimum I.D. drain line fittings. The pictures are from the installation manual You can also google the model number and find the installation guide via Maytag
Answered by JJinHtown 6 years ago
Sorry, there was a problem. Please try again later.
What Vent? Are you asking about the air gap so it drains? Here is excerpt from the installation manual "Make sure to connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20" (508 mm) minimum above the floor. It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter or be connected to an air gap." find the installation manual here https://www.maytag.com/content/dam/global/documents/201811/installation-instructions-w108069060-revH.pdf There is more info on the drain on pages 22 thru 24
Answered by JJinHtown 6 years ago
Sorry, there was a problem. Please try again later.