A:AnswerThe correct answer is yes, it works fine with the LGA 1200 chips since they share the same mounting design LGA 1151. Please see the updated compatibility list from the manufacture below.
Block Compatibility Intel LGA 2066 / 2011-3 / 2011 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
AMD Socket AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1
A:AnswerThe AM3 and AM4 mounting bracket is the same. You use the original AM3 AM4 mounting bracket that comes with the motherboard, there are two clips with threads that go on the mounting bracket, and then a ring adapter that has two raised wings that allow for you to screw down the cooler.
A:AnswerYes it comes with different mounting brackets and on the brackets there is different holes for different sizes you just have to find the right one that fits and line up the screws
A:AnswerIt does not:
Intel: LGA 1150, 1151, 1155, 1156, LGA1200, LGA1366, LGA2011, LGA2011-3, LGA2066
You can find the MSI series that adapts to the 12th Gens here:
https://www.msi.com/Liquid-Cooling
A:Answerit will probably be fine for a locked chip (11700) however if the cpu supports overclocking (11700k) i would get either a 360mm model or a highend air cooler.
A:AnswerYes compatible with most Intel cpus and most amd cpus
Comes with several brackets to use with most boards and processors, unless yours is several years old.
A:AnswerAs long as you case can mount 2 120mm fans on the top then yes remove any fans that are there install the cooler just be mindful it will be lower and with some setups if your ram is tall ie:rgb ram it may hit the ram
A:Answerthere are better products for high-end intel chips. especially if overclocking is a possibility... will it mount and physically work sure but it kept my 10900k above 90c under cinebench load before i undervolt and underclocked it....
A:AnswerThis uses MSI fans with their own design. Opaque fan blade and ARGB lighting so the fans lights up. I could not find these fans with similar designs.
