“Will this work with the Linksys re6300 AC750 The router I have is only 1 GHZ. The router I have is from my cable supplier.”
Answer This Question
1-4 of 4 Answers
Short answer: Most likely it should work once configured. Long answer: The N300 could be used as a range extender. You would have to configure the Linksys to use either a "Bridge mode" or "range extender" where it makes both routers have the same SSID. Alternatively, you could install this as a second router providing an entirely separate SSID using either a LAN or UPLINK port on the primary router. you risk interference if the two routers are on the same channel and/or frequency. The N300 is a basic router, operates on the 802.1n protocol in either the 2.5ghz or 5.0ghz frequency. it is not a MIMO (Multi In Multi Out) router. not being MIMO it only has one pathway for data to travel so it will be much slower than a router that does support MIMO (most AC series routers like the 750 do). The N300 caps out at 300Mbps (thus the name) where using MIMO and AC protocols the 750 tops out around 750Mbps. Using the N300 for anything other than basic internet or resource sharing is going to be dramatically slower than the Linksys 750 and will slow down a device's connection if it stands between that device and the Linksys 750 router.
Sorry, there was a problem. Please try again later.use ac all the way
Sorry, there was a problem. Please try again later.arboroaks2: Intercompatibility between devices of different manufacturers is an unreliable expectation; especially now, when the "Planned Obsolescence" paradigm is in full vogue.
Sorry, there was a problem. Please try again later.arboroaks2: Whereas compatibility between various manufacturers' appliances is doubtful; I recommend you you consult their respective Technical Support services before you invest your trust and money on their reliability. Specificity pertaining to respective devices and discrete requirements suitable to capacity of your physical plant should be readily available, however.
Sorry, there was a problem. Please try again later.