“How are the cameras powered ? Rechargeable battery pack or hard wire ac ?”
Answer This Question
1-5 of 5 Answers
By hardwiring
Sorry, there was a problem. Please try again later.Hard wire ac
Sorry, there was a problem. Please try again later.The cameras with this Wireless System are AC Powered Wireless. Each camera comes with its own camera power adapter and must be connected to a power source. No changing or recharging batteries is required! Thank you!
Sorry, there was a problem. Please try again later.AC POWER STILL HAVING PROBLEMS WITH CAMERAS (3) WORKING (1) NOT WORKING REPLACED IT TWICE.
Sorry, there was a problem. Please try again later.Sheeze: CAMERA POWER is 12 Volt ((( DC ))) (hard to find this answer...All you had to do was put in "DC"!) (Would be much moe betta if an AC system waas devised --- Anyway DISTANCE OF WIRE to OUTLET. (( EXTENTION PAST THE 9 FT?...They only give you 9 feet of wire) ((( USE AN EXTENTION CORD TO GET TO THE ADAPTER IF NEED BE ))) -- DC "Direct Current does not travel far hence you probably would not want to "custom"add to this wire, make one, or extend this wire. I know I would be thinking about it. (This is the reason AC Current was invented) DCs Voltage will drop off substancially if going over the factory 9 Ft cord. When Voltage Drops (goes lower) Amps Increase...YOU COULD DESTROY THE CAMERA WITH THE HIGER AMPS. /// Guess the only real solution is to grab a small cheap extention cord....but you will have little adapter boxes hanging high on the walls...lol. --- The only other way would be to increase the conductor size to combat voltage drop...but
Sorry, there was a problem. Please try again later.