This Unit Has How Many Watts ? null

Did some more research on this from the manual. You'll need to look at the back of your current speaker to find the impedance. It's typically 6 or 8 ohms. If you have 6 ohm speakers you'll have more power being delivered to each speaker @ 135 watts per channel for 675 watts total output and if you have 8 ohm speakers it's only 100 watts per channel for 500 watts total output. Here is how the output breaks down: Rated power output Front , Center and Surround speaker each have 135 W per channel (1 kHz, 6 Ω, 1 %) 100 W per channel (20 Hz to 20 kHz, 8 Ω, 0.09 %) Total Harmonic Distortion. . . . . . . . . . . . . . . .0.06 % (20 Hz to 20 kHz, 8 Ω, 50 W/ch) Frequency response (LINE Direct mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hz to 100 kHz dB Guaranteed speaker impedance . . . . . . . . . . . . 6 Ω to 16 Ω Input (Sensitivity/Impedance) LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mV/47 kΩ Signal-to-Noise Ratio (IHF-A network, 1 kΩ shorted) LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 dB

155 watts per channel. There are 5.2 channels.

155 watts per channel, 5 channels = 775 total watts RMS.

“This Unit Has How Many Watts ?”

Asked by Sueludad 8 years ago

Answer This Question

See all questions & answers

Onkyo - TX 5.2-Ch. 4K Ultra HD and 3D Pass-Through HDR Compatible A/V Home Theater Receiver - Black-Front_Standard

1-4 of 4 Answers

Did some more research on this from the manual. You'll need to look at the back of your current speaker to find the impedance. It's typically 6 or 8 ohms. If you have 6 ohm speakers you'll have more power being delivered to each speaker @ 135 watts per channel for 675 watts total output and if you have 8 ohm speakers it's only 100 watts per channel for 500 watts total output. Here is how the output breaks down: Rated power output Front , Center and Surround speaker each have 135 W per channel (1 kHz, 6 Ω, 1 %) 100 W per channel (20 Hz to 20 kHz, 8 Ω, 0.09 %) Total Harmonic Distortion. . . . . . . . . . . . . . . .0.06 % (20 Hz to 20 kHz, 8 Ω, 50 W/ch) Frequency response (LINE Direct mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hz to 100 kHz dB Guaranteed speaker impedance . . . . . . . . . . . . 6 Ω to 16 Ω Input (Sensitivity/Impedance) LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mV/47 kΩ Signal-to-Noise Ratio (IHF-A network, 1 kΩ shorted) LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106 dB
Answered by DirtyJersey 7 years ago
Sorry, there was a problem. Please try again later.
155 watts per channel. There are 5.2 channels.
Answered by Clint 8 years ago
Sorry, there was a problem. Please try again later.
155 watts per channel, 5 channels = 775 total watts RMS.
Answered by DirtyJersey 7 years ago
Sorry, there was a problem. Please try again later.
The receiver is 155 Watts.
Answered by CommunityAnswer 8 years ago
Sorry, there was a problem. Please try again later.