Questions & Answers

Q: QuestionWhat is the maximum range of the wireless connection for these speakers?

• A:Answer The maximum wireless range is 100 feet.

Q: QuestionDoes this Rocketfish speaker kit require batteries?

• A:Answer No, the speaker kit does not require batteries.

Q: QuestionDoes the Rocketfish wireless rear speaker kit consume a lot of power?

• A:Answer No, it has low power consumption for worry-free operation.

Q: QuestionHow does the Rocketfish wireless rear speaker kit transmit audio?

• A:Answer It transmits high-quality audio over a radio frequency communication link.

Q: QuestionThis kit is rated at 25 Watts. Does it mean that a speaker rated at 150 Watts will be an overkill for this product?

Asked 5 years ago by soundhound.

• A:Answer Yes to overkill. It will work but if you try to crank things up to better drive those speakers, the result will be distortion; clipping at higher frequencies.

  Answered 5 years ago by SteveVerified Purchase

  Helpful (21)Unhelpful (3)ReportAnswer this question

Q: QuestionDoes this require being connected to your wi fi setup or does it just run its own separate network.

Asked 6 years ago by HLS.

• A:Answer No, you don't need to connect this to your home network at all. The only wireless function are the two devices wirelessly speaking to one another.

  Answered 6 years ago by LarryVerified Purchase

  Helpful (10)Unhelpful (0)ReportAnswer this questionShow more answers (5)

Q: QuestionMy rear speakers are approximately 20ft apart. The kit only comes with one receiver. So, tell me how this is wireless.

Asked 5 years ago by Anonymous.

• A:Answer It is wireless in the fact that you do not need to run a wire from your audio receiver to your rear speakers Your rear speakers would need to be wired into the Rocketfish receiver unit for them to work as it will receive the wireless transmission from the transmitter unit that is connected to the rear speaker terminals of your audio receiver. As your rear speakers are to be some distance apart, you would just need additional speaker wire to cover the distance between the Rocketfish receiver And your rear speakers.

  Answered 5 years ago by Surroundsound808

  Helpful (7)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionWill this unit work with passive speakers, or just powered speakers?

Asked 6 years ago by Anonymous.

• A:Answer It works with passive speakers. I use it to prevent running wires across the room to my small Polk rear speakers.

  Answered 6 years ago by AnonymousVerified Purchase

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (4)

Q: QuestionHas anyone experienced any sound lag to the speaker running on this setup?

Asked 5 years ago by AdamA.

• A:Answer The sound lag is very low, below 30ms, it shouldn’t be noticeable.

  Answered 5 years ago by RocketfishCustomerSupport

  
  Helpful (6)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionCan you use 2 kits on same receiver

Asked 5 years ago by James.

• A:Answer Yes. I have 2 sets. One controlling my rear pair and one my side pair.

  Answered 5 years ago by AaronVerified Purchase

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondo the front and back units need line of sight to connect?

Asked 4 years ago by m0grady.

• A:Answer Mine is not in direct line of sight. One is located in a audio cabinet and the other 9ft in the air on top of built in cabinets. It connected fine for me.

  Answered 4 years ago by Taz1Verified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionHi I have Definitive Technology - ProMonitor 800 4-1/2" Bookshelf Speaker would this work with those ??

Asked 5 years ago by Brina.

• A:Answer Yes, and it should sound great. I’m using it with a pair of Klipsch bookshelf speakers which have a similar RMS power rating to the Deff Techs and they sound perfect.

  Answered 5 years ago by Akramer25

  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionBeing this system operates 2.4 Ghz and so do cell phones, bluray players, anything wireless or bluetooth does it have a lot of interference from other equipment or static electricity?

Asked 5 years ago by Jim.

• A:Answer Mine is in my attic above speakers. I have a WiFi puck almost directly below it and have never had any issues.

  Answered 5 years ago by Gwat0629Verified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo the surround speakers need to be powered or can they be regular un-powered ones? Is the receiver have a sound amplifier in it?

Asked 6 years ago by Sleestak.

• A:Answer I have a Denon receiver that powers the Front Towers and Center Channel. This device works great and has its own power source to the rear speakers, I have it all hidden behind the couch so no cutting or drilling.

  Answered 6 years ago by MDClineVerified Purchase

  Helpful (6)Unhelpful (3)ReportAnswer this questionShow more answers (1)

Q: Questioni cannot find how many watts this thing puts out or any info about ohms. i would like to know how many watts and any available ohm info as well

Asked 6 years ago by kip.

• A:Answer The reciever has a variable output, and states 4-16 Ohm

  Answered 5 years ago by AxelVerified Purchase

  Helpful (4)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionCan I use this kit to connect my Bose 161 (passive) speakers as rear in my home theater.

Asked 6 years ago by Florida.

• A:Answer Yes, the unit is designed for passive speakers and will work with your system.

  Answered 6 years ago by CommunityAnswer

  Helpful (5)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes it work with Yamaha sound bar if I want to add on wireless speakers.

Asked 2 years ago by Alex.

• A:Answer Alex - I'm using a Yamaha receiver and not a soundbar for my set up. For the wireless transmitter to work, the audio signal going into the Rocketfish transmitter comes from my receiver's speaker output. In other words, from the left and right channels' + and - outputs using speaker wire. For the Rocketfish receiver unit, it's the same thing...you'll need + and - connections to your speakers. Unless your soundbar has those audio outputs to drive your rear speakers, this particular product won't work. This would be the case if your soundbar is connected to your TV instead of an audio receiver.

  Answered 2 years ago by Anonymous

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI am wanting to get two of these for a 7.1 setup. One of them will be connected to the right rear and right surround, and the other unit will be connected to the left rear and surround. Will there be interference issues with two units in the same room?

Asked 4 years ago by CDWinNLV.

• A:Answer Nope. I have done the exact same thing and they work great.

  Answered 4 years ago by Cameljockey1Verified Purchase

  Helpful (3)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work with a denon recover and Harmon kardon banquet speakers, I’m trying to not run wires under carpet. Thanks you ...

Asked 4 years ago by Jc.

• A:Answer I have a Denon receiver paired to Martin Logan MLT2 speakers and it works fine. For my set up, I made sure to set the Rocketfish volume level knob on the back of the little receiver that connects to the speakers to middle or LESS. Use the Denon receiver's speaker set up to make any necessary adjustments to the speaker level when doing calibration. If you hear any distortion, dial it down,, a little bit at a time until it sounds right. Hope that helps!

  Answered 4 years ago by IzzyCVerified Purchase

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (2)