1-1 of 1 Answer
Hi Bonnie, The RF24FSEDBSR measures 35-3/4" wide by 68-7/8" high without the hinges and door (70" with them) and the case depth is 24-1/8". The hinge assembly extends back approximately 8-10" from the front of the Refrigerator. Samsung recommends leaving at least 3/8" on the top and sides and 1" behind the Refrigerator for air flow and ease of movement, so the minimum recommended cut-out if the enclosure is less than 70" high is 36-1/2" wide by 69-1/4" high by 15" deep. If the enclosure is over 70" high, the minimum size for the cut-out is 36-1/2" wide by 70" high by a maximum of 25-1/8" deep, keeping in mind that the Refrigerator should not be recessed into the enclosure beyond the point where the front edge of the case is flush with the front edge of the cabinets. I would suggest downloading the pdf copies of the Specification Sheet or User Manual from Samsung's website for illustrations of these dimensions, which may help to clarify. Thank you, Ms. Samsung
Sorry, there was a problem. Please try again later.
