Questions & Answers

Q: QuestionWhat does the cabinet size have to be? Both the inside of the cabinet and the outside please.

Asked 4 years ago by minoh20.

Q: QuestionWhat are the internal dimensions of this trim kit?

Asked 4 years ago by Trimalicious.

Q: QuestionI can see air vents on my old microwave trim kit but on this one, it's all closed. Will that cause any issues for airflow within the new microwave? I'm replacing my old microwave with Samsung - 1.9 Cu. Ft. Countertop Microwave(MS19M8000AG).

Asked 4 years ago by SumodBose.

Q: QuestionHi, Is this too large for a 1.2 cubic foot microwave? Also, what are the dimensions of the inner square?

Asked 4 years ago by dreidel13.

• A:Answer I'd like to help with this, Dreidel13! First, I have this link (https://bit.ly/33A3yAr) to a full list of the models this trim kit is compatible with. I also have the dimensions listed as 29 3/4" x 20 5/64" x 1 1/4". ^Jecca

  Answered 4 years ago by Samsung

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionThe opening in my cabinet is 16 1/2 inches tall by 26 1/2 inches wide. Will this trim kit work for my opening.

Asked 5 years ago by Red.

Q: QuestionHello, I have a cabinet opening of 25 1/4 and I am looking for a trim kit to my new Samsung microwave. The microwave dimensions are 13 7/25 height, 23 31/50 width. Can you help me find the right size? Maile

Asked 5 years ago by Maile.

• A:Answer Hi Maile! I recommend checking SamsungParts.com or calling 1-800-627-4368. You will need the model number for your microwave to ensure compatibility. ^Jecca

  Answered 5 years ago by Samsung

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am trying to cover an opening with a span of 27 7/8” wide. Will this trim kit cover that? The dimensions in the specs don’t look right, as maybe they are the dimensions of the opening only?

Asked 5 years ago by Matty.

• A:Answer Hi there, I can help with that. I located the dimensions for the trim kit, 29 3/4" x 20 5/64" x 1 1/4". Thank you for choosing Samsung. ^Brad

  Answered 5 years ago by Samsung

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the microwave supported by provided brackets or do I need to build a shelf for the microwave to sit on?

Asked 5 years ago by Joel.

• A:Answer You will need a shelf. Thi is just a trim for the microwave..

  Answered 5 years ago by WilliamVerified Purchase

  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionWhat are the dimensions of the inner opening?

Asked 5 years ago by GnarlsUncleCharles.

Q: QuestionDoes this trim kit work with the SAMSUNG MC12J8035CT 1.2 cu. ft. Countertop Convection Microwave?

Asked 5 years ago by Starrter.

• A:Answer Hi, the compatible trim kit for the microwave is MA-TK3080CT/AA. You can view this information on our website Samsung.com under product accessories. We thank you for choosing Samsung! ^Lena

  Answered 5 years ago by Samsung

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI recently bought the microwave and trim kit. Received the microwave, but still waiting for the trim kit to arrive. Does this trim kit come with a platform to level and secure the microwave in place? My old microwave's trim kit came with one.

Asked 6 years ago by lecv.

• A:Answer yes but you may have to add shims under it depending on the size of your cabinet.

  Answered 6 years ago by Scottfixer

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat are the interior dimensions of this trim kit. Not the outside, but the hole in the middle. Thanks!

Asked 6 years ago by RC.

Q: QuestionDo you have to drill into the cabinet at all for the trim kit installation?

Asked 6 years ago by DLynggard.

• A:Answer Yes. The front of the trim kit screws to the front of the cabinet and bolts to the oven.

  Answered 6 years ago by Scottfixer

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI just purchased an LG LMC2075ST countertop microwave to use in my 30" wall oven cabinet. I can't find a Trim Kit. Is there a trim kit I could use if not in LG, another vendor?

Asked 7 years ago by Maryann.

• A:Answer Most people like to match the trim kit to match with the microwave. Thus you want both from the same manufacturer. Once you have both items at home then you can check for the match between the two and also with other items if you would. Installation instructions from most manufacturers are not good at all. So you may end up to run a dry run install of the microwave in the cutout and hold Trim around it and see if you like what you see. This is the only real check that no one can do for you. You can get bits and pieces only from others.

  Answered 7 years ago by Rkey

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwhat is the RO needed for this trim kit? what is the top & bottom overlay of the trim piece?

Asked 7 years ago by DIDDY.

• A:Answer Not sure what is the RO I just installed the kit on the island microwave and give it a built in look

  Answered 7 years ago by Oscar

  • 
  • 
  Helpful (3)Unhelpful (3)ReportAnswer this question

Q: QuestionWhat size of microwave goes inside this trim kit ?

Asked 8 years ago by Mary.

Q: QuestionBy all accounts it says the opening is 25.5 x 21.5, but the matching microwave is 23.625 x 13.28, is there really an inch gap on each side and 4" top and bottom? The picture does not show that?

Asked 8 years ago by Anonymous.

Q: QuestionDoes this trim Kit work also for a Samsung MS19M8000AS

Asked 8 years ago by Rich.

• A:Answer Unfortunately I don’t know anything about that model number,. So I have know way of knowing if it will fit. I would go to the store and they will look it up and can tell you which units it can be used with. When I purchased my appliances, the trim kit was out at all Best Buy’s and other stores, I just kept watching on-line for it and when I found it ordered it and had it shipped to the store.

  Answered 8 years ago by Beth

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI recently purchased Samsung - 30" Trim Kit for MS19M8020TG Microwave - Black stainless steel. There were no instructions to install. I that came in the box was a small bag of screws and a paper template to cut the box. I need to know how to install the

Asked 3 years ago by NoInstructions.

• A:Answer Use template to position location on cabinet wall. Your microware should be on shelf you want to use before drilling holes for screws. If all appears well place trim kit around microwave and screw into cabinet. If problem exist start over until you are satisfied with location and look. Also view any online photos found

  Answered 3 years ago by AnonymousVerified Purchase

  Helpful (0)Unhelpful (1)ReportAnswer this question