A:AnswerHello,
Yes, this mount is compatible with the LG 77" OLED C5 (model OLED77C5PUA). That TV uses a 300 x 200 mm VESA pattern, which falls well within this mount’s supported range. The size and weight are also fully supported.
If you have any other compatibility questions, feel free to reach out to our team at [email protected]
or 1-800-359-5520. We’re happy to help.
Thanks,
SANUS SupportHello,
Yes, this mount is compatible with the LG 77" OLED C5 (model OLED77C5PUA). That TV uses a 300 x 200 mm VESA pattern, which falls well within this mount’s supported range. The size and weight are also fully supported.
If you have any other compatibility questions, feel free to reach out to our team at [email protected]
or 1-800-359-5520. We’re happy to help.
Thanks,
SANUS Support
A:AnswerHi Bobby,
Yes you can mount a Sonos soundbar under the TV but it will likely block your ability to use the vertical shift feature of this mount once it is installed. If you have any other questions, feel free to reach out to our team at [email protected] or 1-800-359-5520. We’re happy to help. Thanks, SANUS Support
A:AnswerHello, This mount is not compatible with 32" stud spacing. If you have any other questions, feel free to reach out to our team at [email protected] or 1-800-359-5520. We’re happy to help. Thanks, SANUS Support
A:AnswerHello Fiveby21,
Great question! The SANUS Elite Advanced Full-Motion 4D + Shift mount allows horizontal (left/right) adjustment during installation. This step is shown on page 10 of the instruction manual — when attaching the arm assembly to the wall plate, it can slide side-to-side along the plate to fine-tune the TV’s placement.
Just be sure the arm assembly stays between the lag bolts for safety, and tighten the locking screws once it’s positioned where you want it.
If you have any other questions please reach out to us via email [email protected] or call 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHello TP,
This mount is designed to support TVs up to 90" in size and up to 125 lbs. While your 98" TV is under the weight limit, the screen size exceeds the mount’s specifications, so we can’t recommend it for your setup. In this case, both size and weight are limiting factors to ensure a safe and secure install.
If you’d like, we can help you find a SANUS mount that’s a better fit for your 98" TV. Just send us your TV’s model number at [email protected]
or call us at 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerHello,
Yes the arm assembly can be slide anywhere along wall plate for optimal positioning of your TV. You'll just need to be sure that the swing arm is positioned BETWEEN the lag bolts. If you have any other questions please reach out to us at [email protected] or call 1-800-359-5520. Thanks, SANUS Support
A:AnswerHi Suz,
The measurement of the wall plate is 15.7in x 36.2 inches. If you have any other questions please reach out to us at [email protected] or call 1-800-359-5520.
Thanks,
SANUS Support
A:AnswerThat is how the Geek Squad installed my 85” Bravia 9 on this mount. It should be fine since the upper load limit of this TV is fairly low, but ask yourself if you want to risk it. I don’t have kids and if it falls off the wall it’s on Best Buy and no one gets hurt. If you install it and it falls down, no one to blame but yourself (assuming you install it). If you have kids around definitely wouldn’t risk it unless you contact Sanus support for clarification and get thumbs up from them. Their support is very helpful.